Used Haco Ts 3006 for sale (83)

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Pedpezwclujfx Ahcera Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: used, Year of construction: 1991, machine/vehicle number: 91033420, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, working width: 3,050 mm, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Serial number: 91033420 Electric length stop Prodpfezdzh Ujx Ahcea Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1992, gebraucht 1992 090174 Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Prodpoyi Hppofx Ahcea Details:

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 6 mm distance between columns 3200 mm speed . m/min rear stop 1000 mm total power requirement 7,5 kW The backgauge is electric. The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Prjdpfxoyqwbre Ahcea please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Podpfxowx Ix Sj Ahcera Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Predpfxozi Rl To Ahcoa Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Pjdpfx Aoxpm Iqshcsra Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs.

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW Psdpjznvgmefx Ahcjra electric stops weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Pjdpfjzrgf Ujx Ahcora Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at smallest angle: 14 Strokes per minute at largest angle: 8 Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Weight approx. 4500 kg Year of manufacture: 2010

Year of construction: 2018, condition: ready for operation (used), cutting length (max.): 3,050 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details. - Control System: SC 100 T Touchscreen control- Voltage: 380V / 50 Hz- Capacity: 3000 / 6- Backgauge Adjustment Range: 1000 mm- Sheet Support Arms: 1x 1000 mm length- Blade Gap Adjustment: Automatic- Rake Angle Adjustment: Automatic- Cutting Line Illumination: Included- Safety Equipment: Type II Finger Guard with Moulden, CE Certified- Machine Paint Finish: Light Gray and Dark Gray (No Cyan Blue)- Current Status: Delivered WITHOUT OIL FILLING Pjdpfxey Ti A Is Ahcjra

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12mm Max. cutting length: 3100mm Strokes on full length: 7mm Strokes in short 1000 length: 14 Cutting angle: 0,5 - 3° Length backgauge: 0 - 1000mm Number of down holders: 18 Operated mechanical or hydraulic:Hydraulic Power: 24kW Length: 4100mm Width: 2400mm Height: 2300mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Prodezvf Hrspfx Ahcja

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Prodpfx Ahszhbglscsa Type TS 3012 Capacity: 3050 x 12 mm Adjustable back gauge Blades recently sharpened

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Psdpfx Asxgdlnshcsra Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2004, working width: 2,500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 2,500 mm, Refurbished machine HACO hydraulic guillotine shear, TS 2.5m x 6mm model New SP9 control system Retractable rear stop with 820mm stroke Podpfozp U H Usx Ahcsra New, four-edged blades made of stainless steel

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2009, working width: 3,000 mm, sheet thickness steel (max.): 6 mm, Refurbished machine HACO hydraulic guillotine shear, HSLX type, 3m x 6mm New SP9 control system Pneumatic sheet metal holding system Podpfx Ahezqa A Rjcora 1.5 m squaring stop New four-edged blades, stainless steel quality

Condition: good (used), Year of construction: 1996, sheet width 3050 mm Prjdpezndq Tsfx Ahcja plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: used, Year of construction: 2002, machine/vehicle number: 81511, functionality: fully functional, overall weight: 25,000 kg, bending force (max.): 225 t, control type: CNC control, Equipment: european tool clamping system, Used HACO press brake ERMS432225, year of manufacture 2002, serial no. 81511 Prsdpfx Aeyml D Tshcja

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 37.5 kW (50.99 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 500 t, stroke length: 400 mm, operating speed: 7 mm/s, reverse speed: 60 mm/s, table width: 530 mm, table length: 4,100 mm, throat depth: 500 mm, distance table to ram: 890 mm, overall weight: 42,000 kg, - Heavy-duty press brake > 300-ton capacity per meter > ideal for high-strength alloy steels - 6 axes: Y1 / Y2 / X / R / Z / V - The upper ram has an extension (horn) of 500 mm > total bending length of 4,100 mm - Hydraulic upper tool clamping - Capable of conical bending! - Akas laser safety system - CNC crowning - Equipped with a V-Matic variable bending die (CNC control); from V40 to a maximum of V160 - The machine is floor-mounted; no foundation is required - Included: a large set of heavy-duty tooling for highly alloyed steels! - The tools are stored in a mobile cart that can be attached to the machine. The operator can then install and remove the upper and lower punches and dies manually. Brand: HACO Model: ERM 36500 1 unit in total Bending capacity: 500 tons x 4100 mm (bending length) Electrical supply: 380V Robosoft numerical control (Macon, 4 axes, proportional valve amplifier, integrated by Muritech) Siemens S7 PLC Invertek Optidrive CP frequency inverters Baumüller servo amplifiers Motorized multi-axis back gauge with cable carrier chain Safety: Type 4 DSP Laser non-material light curtain (transmitter/receiver), CE certified Dell control screen Supplied with a large set of tooling: V-dies of various lengths, radii, and openings Work table with roller conveyors for sheet metal handling Machine is stationary, not tested under power - on-site inspection recommended before bidding Reinforced version: ram designed to support a load of 300 tons per meter Special CNC-controlled variable V-die (V40 to V160) Hydraulic clamping at the top CNC crowning Press equipped with a 500 mm horn User-friendly control via 2D touchscreen, Thurei 02E version 2025 software Podpfx Ahjzw I N Sscsra 2 custom-made tool carts for storing bending tools, designed for tool changes Dismantling/removal: must be carried out by a specialized company No suitable lifting equipment available on site Logistical visit essential before removal Serial number: 81599 Sale due to bankruptcy

Condition: used, Year of construction: 2011, total length: 3,800 mm, total width: 2,000 mm, total height: 1,900 mm, Colour: Grey Weight: 6.000 kg - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 22106 Podoy Nk S Aopfx Ahcjra - Drive system: Teach-in - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 22 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3800mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Predpsx Ed H Aofx Ahcea

Condition: used, functionality: unexamined, Servo drives for press brakes. Podpfxsx Dr Dae Ahcera Used condition, removed from operational machines. Untested. Please request further details and photos. We can purchase your faulty press brake.

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Prjdox Dr U Espfx Ahcsa

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V Prjdpfjrgbvvox Ahcsa -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Condition: new, functionality: fully functional, New and used controllers for press brakes. For replace, spare parts and retrofitting. Cybelec Cybtouch8, Cybtouch 12, Modeva Pac 15 TP10S, E21 Estun, E22 etc. Pedpfxjx Hkrwo Ahcjra Other types on request. We can buy your tired press brake for spare parts.

Condition: used, Year of construction: 2018, HACO EMS30100 press brake Predpfx Ahjynkxljcsa