Used Wmw Bt 2 for sale (455)

Condition: good (used), end mill, end mill, milling cutter -Outer diameter: 200/H60 mm -Teeth: 12 -Quantity: 1 available Price: per piece Isdpeb A Smpefx Ahvshw -Weight: 9 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck Iodpedq Nftofx Ahvohw -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Condition: used, Technical details: number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t Iodew Th Nlspfx Ahvjhw dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *

Condition: used, Year of construction: 2001, Technical details: Isdpfx Ahoxna Uzovjhw pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg Iedpfx Aob A Iccehvshw

Condition: ready for operation (used), Year of construction: 1978, operating hours: 4,500 h, functionality: fully functional, workpiece weight (max.): 2,000 kg, wheel width: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, rotary table diameter: 1,020 mm, position of the milling head: +-45 degrees, table diameter: 1,020 mm, feed rate X-axis: 8 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 2 m/min, total length: 4,500 mm, wheel diameter: 1,550 mm, gear diameter: 1,550 mm, total height: 3,300 mm, total width: 2,100 mm, input current: 50 A, input frequency: 50 Hz, workpiece diameter (max.): 1,580 mm, milling spindle length: 380 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 200 rpm, table bore: 235 mm, spindle speed (min.): 28 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, grinding spindle motor power: 11,000 W, outer diameter: 1,580 mm, overall weight: 16,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 28 rpm, table load: 2,000 kg, mount diameter: 235 mm, helix angle: 45 °, tool diameter: 235 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gear Hobbing Machine — WMW MODUL ZFWZ 1250 The MODUL ZFWZ 1250 is a heavy-duty gear hobbing machine designed for accurate machining of large spur and helical gears. Manufactured in 1978 by WMW MODUL (Germany), the machine is known for its robust cast-iron construction, high rigidity, and long-term reliability in demanding industrial environments. The machine is capable of machining gears with a maximum gear diameter of 1,550 mm and a maximum workpiece diameter of 1,580 mm, handling workpieces weighing up to 2,000 kg. It offers a cutting (wheel) width of 600 mm and supports gear hobs with a diameter of up to 235 mm, making it suitable for medium to large gear production. The hobbing spindle features infinitely variable speed control from 28 to 200 rpm, allowing precise adjustment for different materials and cutting conditions. For helical gear machining, the machine is equipped with a tilting milling head (±45°), providing flexibility for various gear geometries. A large rotary table with a diameter of 1,020 mm ensures stable and secure clamping of heavy workpieces. The machine is driven by an inverter-controlled main motor with a power of 11 kW, delivering reliable cutting performance under continuous operation. Power supply is three-phase, 50 Hz. With an overall machine weight of approximately 16,000 kg, the ZFWZ 1250 offers excellent vibration damping and machining stability. The machine is fully functional, ready for operation, and suitable for both production and refurbishment of large industrial gears. Key Features: *Gear hobbing for spur and helical gears *Maximum gear diameter: 1,550 mm *Maximum workpiece weight: 2,000 kg *Cutting width: 600 mm *Gear hob diameter: 235 mm *Infinitely variable spindle speed: 28–200 rpm *Tilting milling head: ±45° Ihodpsx I Ntpjfx Ahvsw *Heavy-duty industrial cast-iron construction *Inverter-controlled main motor: 11 kW Typical Applications: *Heavy gear manufacturing *Large transmission components *Industrial gear production and refurbishment

Condition: used, Year of construction: 1978, x-travel 820/850 mm y-travel 300/330 mm z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Ihedpfxexxb Htj Ahvew Further techniscal detals please consider pictures

Condition: good (used), Manufacturer: WMW VEB Tip: FW 200×630 x-y-z: 380 - 140 - 230 mm. Ihodpjik Hcuofx Ahvjw Table size: 200x630mm

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ihjdpfjxfzdlox Ahvsw Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Condition: used, Type BF 63 Spindle mount: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Iodpfswrpy Rex Ahvshw Table size: 900 x 710 mm Drilling travel: 560 mm Table load capacity: 2000 kg Rotary table: 360 degrees

Year of construction: 1979, condition: good (used), For sale comes: Ihedpfx Asnl D U Sjhvew 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW Isdpfx Asgbgawshvehw weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: good (used), total length: 2,035 mm, total width: 1,565 mm, plate height: 255 mm, Manufacturer: ZERBST Type: DP1 / S2 & DP2 / S3 & DP3 / S3 Year of manufacture: 1988 Specifications Metric US Standard Length 2035 mm Width 1565 mm Height 255 mm Ihodpfxswp H Aws Ahvjw Weight per plate approx. 1200 kg Number of matching pieces 4 Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details.

Condition: good (used), sheet width: 1070 mm Iedpfx Aheg Rypmjvjhw plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m - upper roll can be swing out - operation via hand wheel

Condition: ready for operation (used), Year of construction: 1980, operating hours: 15,339 h, functionality: fully functional, grinding width: 2,650 mm, grinding length: 11,500 mm, table load: 10,000 kg, grinding height: 2,000 mm, grinding wheel diameter: 600 mm, The machine was retrofitted by the seller in 2020! The machine remained powered until 01.08.2025! TECHNICAL DETAILS Ijdow I Ebuspfx Ahvohw Grinding Area: Maximum grinding width: 2,650 mm Maximum grinding length: 11,500 mm Maximum grinding height: 2,000 mm Maximum workpiece height: 2,120 mm Maximum distance between columns: 2,670 mm (by removing the guideways, a width of 2,750 mm can be achieved) Table size: 2,240 x 12,000 mm Maximum table load with even weight distribution: 10,000 kg/m Travel and Adjustment Ranges: Cross slide travel: 1,800 mm Vertical adjustment of universal grinding support: 450 mm Vertical adjustment of grinding support with horizontal spindle: 250 mm Head inclination: ±90° Grinding Spindle: Wheel diameter: 600 mm Wheel width: 120 mm Wheel bore: 200 mm Wheel speed: 1,000 rpm Spindle power: 30 kW MACHINE DETAILS Control: Fanuc CNC 31i Model A Operating hours: 15,339 hours EQUIPMENT Enclosure without roof

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, distance between stands: 800 mm, stroke length: 500 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Ihjdpfxetzxvwj Ahvew Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, VEB Fritz Heckert Ijdpfx Aow Dvanohvohw ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Accessories: 2nd milling head, hob cutters in various modules, steadies, clamping devices, etc.

Year of construction: 1986, condition: good (used), Radial drilling machine WMW Heckert from liquidation Model BR 40/2x1250 Year of manufacture 1986 Isdefnh T Tepfx Ahvjhw MK 5 recording Pinol stroke 355mm Throat 300-1250mm Speeds from 20-1200 rpm infinitely variable 3 gears-- pole-changing engine-- Rev counter Thread cutting function automatic feed 0,063---0,1--0,16--0,25--0,4--0,63 Coolant pump Work light distance spindle - base plate 280-1380mm motor-driven height-adjustment electrical clamping with clamping cube 3,5 Kw Engine power Weight 3to. Space requirement approx. 2760x2030x900

Condition: ready for operation (used), Manufacturer HECKERT Model ZFWVG 250x1250 Serial number 26222127 Working length 1250 mm Iodpfx Ahev T Akgsvshw Max. Ø of the workpiece above the guide 500 mm Max. diameter of the workpiece above the slide 250 mm Machine dimensions (LxWxH) 3200x2500x600 mm Machine weight 3800 Kg Equipment: new electrical system ACAM hydraulic cylinder tailstock automatic square cycle with automatic radial entry heavy head steadies automatic spindle locking lung spare gears instruction manual

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm - Spindle bore 72 mm Iodpotiym Rjfx Ahvshw - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes Ijdpfxot Dxwge Ahvjhw - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Isdjmi Rpiepfx Ahvehw 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16 Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Radial feeds: 0.1 – 2 mm/min Ihsdpfowxxxcex Ahvew Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. Ijdpfx Aeyvt H Ashvshw The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Year of construction: 1964, condition: excellent (used), Description to follow! Iedpfxjytg U To Ahvohw