Used Heckert Cwk 500 for sale (78)

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Kdjdpfjuddgfjx Ah Njg Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Number of tools in magazine: 60 Rapid traverse: 40 m/min Kdsdpfx Ajya Ed Hsh Nog Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Year of construction: 2001, condition: good (used), machine/vehicle number: WAG737, Size: 630 x 630 mm Threaded hole tight to DIN 55201 Kjdpfx Aheddxd Tj Nedg available: 10 units

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 4800 mm Measurements depth 5800 mm Machine weight 12800 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 10000 Spindle motor power 24 kW Number of axis 4 Movement X-Axis Movement 625 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 650 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 650 mm Z-Axis Rapid Traverse 40 m/min Table Table load 4000 kg Tools Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69893-HSK-A63 Media Chip conveyor Yes Kjdpfx Aex D H S Ssh Nsdg Additional Equipment Renichaw measuring probe Tool breakage detection: Yes, in tool magazine Flushing gun at the setup station Waterfall shower Paper belt filter Pallet sequential operation Enclosed work area enclosure according to UW Computer connection via Ethernet interface Network connection This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Operating Hours Total operating hours: 84,857 h Kedpfex Dcb Njx Ah Nedg Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: 840 D, workpiece weight (max.): 400 kg, table load: 400 kg, spindle speed (max.): 15,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, rotational speed infinitely variable, Double pallet changer, IKZ, NC rotary table 0.001 degree Kdsdpfoxxg Eusx Ah Neg

Condition: good (used), Year of construction: 2002, Heckert CWK 400 D, year 2002, Siemens 840 D control, X/Y/Z travel 650/650/650 mm, 240-position tool changer, HSK 63 spindle taper, spindle speed up to 10,000 rpm, internal coolant supply 30 - 50 bar, NC rotary table Ø 460 mm, six-pallet changer 500 x 400 mm, chip conveyor, new spare spindle, 25 HSK holders. Kdjdpfsw Uf Hkex Ah Nsg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 17037, travel distance X-axis: 1,050 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,160 mm, workpiece weight (max.): 1,000 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 240, No reserve price - guaranteed sale at the highest bid! Incl. refurbished second spare spindle and refurbished drive motor. Machine with rotary pallet storage and extended tool magazine! Kjdpfxov Ai Uwe Ah Nedg TECHNICAL DETAILS X-axis: 1,050 mm Y-axis: 1,000 mm Z-axis: 1,160 mm Distance from spindle front edge to workpiece carrier center: min. 190 mm Distance from spindle center to workpiece carrier top edge: min. 100 mm Spindle Speed range: 50 - 10,000 rpm Motor power (40% duty cycle): 31 kW Motor power (100% duty cycle): 19 kW Torque (40% duty cycle): 200 Nm Torque (100% duty cycle): 165 Nm Spindle mount: SK-50 Tools Chip-to-chip time (at rapid traverse 40 m/min): 8 s Tool diameter (with free neighboring positions): 250 mm Tool diameter (with occupied neighboring positions): 125 mm Tool length: 800 mm Tool mass: 35 kg Total mass of all tools in the storage: approx. 720 kg Number of tool positions: 240 Measuring system Type: Linear, optical-incremental, distance-coded Accuracy class: ±5 µm Division period of the grating division: 20 µm Input and display unit: 1 µm Pallets Clamping surface: 630 x 630 mm Loading mass per pallet (at rapid traverse 40 m/min): 1,000 kg Permissible moment with off-center load: 750 Nm Directional bore diameter: 25 H6 Hole distance to table center: 200 ± 0.013 mm Fastening thread: 23 x M16 Workpiece clearance height: 1,200 mm Maximum interference circle: Ø1,100 mm (flattened) Automatic pallet change Number of changeable pallets: 2 + 4 pallets in the circular storage Pallet change time (for standard version): 12 s Pallet change time (for version with clamping hydraulics at least): 14 s MACHINE DETAILS Dimensions: 8,200 x 4,400 x 3,600 mm Weight: 18 t Connection power: 75 kVA Temperature range: 10 - 35 °C Sound pressure level: < 80 dBA

Condition: excellent (used), Year of construction: 2005, Machining center CWK 400 Year of manufacture: 2005 Kdsdpfx Aswpciaoh Njg X travel: 650 mm Y travel: 650 mm Z travel: 650 mm Rotary table (4th axis) CNC: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Operating hours: 42,000 h Tool changer chain magazine: 80 tools, HSK 63 2-pallet pool Weiss motor spindle: 36 kW, 18,000 rpm Accessories and 60 tools included

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Kjdpfxsyba Rwo Ah Nodg

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Ksdjq Ui Hqopfx Ah Nsdg Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: Kdodex Him Hopfx Ah Nsg -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Operating hours approx. 44,900

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm Kdodpfxsx Himtj Ah Nsg -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm Kedpfx Ajx Hilvjh Njdg -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Ksdpjrx Sh Aefx Ah Nodg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Kjdpfjxxvqaox Ah Nsdg

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Kdsdpfx Ahsw Hquxj Nog Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14023, travel distance X-axis: 1,140 mm, travel distance Y-axis: 910 mm, travel distance Z-axis: 875 mm, rapid traverse X-axis: 60 m/min, torque: 1,000 Nm, controller manufacturer: Siemens, controller model: 840 D, spindle speed (min.): 6,000 rpm, coolant supply: 60 bar, distance table center to spindle nose: 240 mm, Equipment: chip conveyor, documentation/manual, Siemens 840 D with network connection Renishaw measuring probe OMP60 SK50 DIN69871 – pull studs DIN69872 6000 rpm, 2 gearbox stages, max. torque 1000 Nm Tool chain magazine with 80 positions 2 pallets 800x800 mm, M16 hole grid Coolant high pressure through spindle 50 bar Kdedpfx Ahjv Npm Hj Nsg Knoll paper band filter and chip scraper conveyor Year of manufacture Dec. 1999 (max. single-shift operation)

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Ksdpfjx U Ectox Ah Nodg Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: excellent (used), 250 x 800 Thread Milling Thread Milling Kdsdpfxsyaa Hij Ah Neg

Condition: new, functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. Kdodpfxjvtnfpj Ah Neg All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 CNC control Sinumerik 840D NC rotary table B-axis Magazine for 80 tools Pallet changing device, 2 pallets 400mm x 400mm Internal coolant supply IKZ chip conveyor Coolant device Kdodpfxjrairwe Ah Nsg CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 1989, 100 various tool holders SK 50 partly unused "NEW Kdodpfjg U H S Rox Ah Neg especially suitable for Heckert console milling machines and machining centers C500 or C630

Condition: good (used), Year of construction: 1992, Travel : X-axis (longitudinal movement) 880 mm Y-axis (transverse movement) 300 mm Z-axis (vertical movement) 385 mm Ksdpfotvfwcjx Ah Nodg Clamping table : Clamping surface 315 x 1250 mm Table load 1000 kg Spindle head : Tool holder 50 SK Speed 28 - 1400 rpm Drive power 5.5 kW Feed : X-, Y-axis 16 - 800 mm/min Z-axis 5 - 250 mm/min Rapid traverse : X-Y-axis 3150 mm/min Z-axis 1000 mm/min connected load : 8 kW Weight : 4.0 t Space requirement : L x W x H 2.3 x 2.0 x 2.6 m Accessories : * various tool holders * Operating instructions

Condition: good (used), Bench drill, pillar drill, column drill, column drill Kjdpfx Asxm Rzioh Nsdg -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece