Used Wagner Wmc 1100 for sale (91)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: MB 116434, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, controller model: Siemens Sinumerik 828D, workpiece length (max.): 1,300 mm, workpiece width (max.): 650 mm, workpiece height (max.): 600 mm, Wagner WMC 1100 Year of manufacture: 2011 The machine is in good, fully functional condition. Control: SIEMENS Sinumerik 828D IKZ (Internal coolant supply) Spindle speed range: 8000 rpm Tool holder: SK 40 X-axis travel: 1100 mm X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Njdpfexqzb Ijx Abrewn Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24 The machine can be inspected under power. The machine is sold without warranty. The machine was operated in single-shift mode.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Wagner WMC 1100 Year of manufacture: 2012 Renishaw probe system – With probe, laser, etc. (see picture) Control: SIEMENS Sinumerik 828D ICS (internal coolant supply) Nodpfjxg Ihyex Abrswn Spindle speed range: 8,000 rpm Tool holder: SK 40 X-axis travel: 1,100 mm X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: MB 116442, controller model: SIEMENS Sinumerik 828D, number of axes: 3, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Tool changer: 24-position Control: SIEMENS Sinumerik 828D Nsdpew T Rtyefx Abrswn EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Nwodjxqtgvjpfx Abren Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: HURON type head lighting lubrication pump feeds on 3 axes visualization on 3-axes Nedpsridyrsfx Abrown vise anti-vibrations

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Nwodpfx Ajw S Hrvobrjn Tool measuring system Handwheel Without tools

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1709006, controller model: SIEMENS Sinumerik 828D, overall weight: 5,000 kg, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tool changer: 24 stations Weight: 5,000 kg MACHINE DETAILS Model: WAGNER WMC 800 L Control: SIEMENS Sinumerik 828D Year of manufacture: 2018 EQUIPMENT Nedpfew Hw Avex Abrjwn Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: MB116186, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel X: 1,100 mm Travel Y: 650 mm Travel Z: 600 mm Main spindle Maximum speed: 8,000 rpm Tool changer Magazine positions: 24 Tool holder: BT 40 Worktable Table size: 1,300 mm x 600 mm Table load: 500 kg Nodowtq Skjpfx Abrown MACHINE DETAILS Control: Siemens 810D Machine number: MB 116186

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm Nedpjwhqz Usfx Abrown

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Nedpfx Abexqtgcerjwn Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Condition: used, BAG PACKING MACHINE Consists of: Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Nwsdpfx Abju Nu Hvjrjn Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 *

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Nsdev Ed Ukepfx Abrown Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: LWAC450-STES-35025, For sale are two refrigeration dryers from L&WGmbH. Both are in good used condition. Both have been used very little. Both are fully functional. PRICE: 250 euros per unit! Nedpfx Absxq A Rdsrjwn

Condition: new, Year of construction: 2025, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available Nsdpfobuqn Hox Abrewn

Condition: used, Year of construction: 1999, band width 221 mm length in total 1.000 mm weight of the machine ca. 300 kg +++++ Nsdpowf Et Hsfx Abrswn Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm Nedpfx Aetq I Rqjbrjwn weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1995, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 45 ° range of revolution per miute: 45...2000 U/min headstock: dist. table - spindle center: max. 300 mm distance spindle nose and table: max. 300 mm feed:: 16...800 / 18 step mm/min table surface area: 1000 x 165 mm table swivelling to both sides: ja Grad Nwedpfxju Ndfuo Abrjn control voltage: 380 V total power requirement: 4,6 kW machine weight approx.: 1540 kg dimension machine xH: 1,5 x 1,5 x 1,6 m The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm *

Condition: used, Wagner Cavity Enameling Line Gema with Opti Center Nwjdpfx Asw U Ra Nsbron

Condition: ready for operation (used), Various machines from a production line are available. 1) Band saw Wagner WPB 420. 2) Conventional soldering machine Dalex Technoplex. 3) Broaching press. 4) Guillotine shear Omag. 5) Jaw grinding machine Wagner. 6) Two electric induction heaters. 7) Two thread cutting machines. 8) Two crimping machines. An on-site inspection is possible. A package sale is preferred. Njdjxnbr Uepfx Abrswn

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Nwodpfxjxdtkuj Abron Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: used, Year of construction: 2003, cutting diameter Ø 520/ 520 x 520 mm saw band length 7250 x 50 mm cutting width 1,6 mm cutting speed 16- 90 m/min power requirement 11 kW dimensions m feed in one step 520 mm multiple feeding length 2080 mm feed speeds infinitely variable 0- 400 mm/min dimensions 4,0 x 2,8 x 2,6 m weight of the machine ca. 3,5 t Double column band saw, full automatic - Sutron BT 15 user terminal - some blades - rest pice appr. 70 mm Nsdpeuxz Thsfx Abrown

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - Dry wall with extraction system and filters - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit Nwedpjxmr Tyjfx Abrsn The paint shop was used for painting window frames.

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm Njdpfx Abou Nfrperewn - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE Nodjxmf Svopfx Abrswn

Condition: used, Year of construction: 2014, x-travel 1300 mm y-travel 500 mm z-travel 570 mm spindle taper SK40 Nwodpfx Aett Tdmjbrsn spindle turning speed - stepless 60 - 6000 U/min rapid traverse x/y/z 7,5 m/min Number of tools 16 St. table surface area 1500 x 400 mm workpiece weight 700 kg total power requirement 12 kW weight of the machine ca. 4100 kg dimensions of the machine ca. 3800 x 3800 x 2800 mm - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual