Used Nail Gun for sale (1,534)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1234, input voltage: 380 V, input frequency: 50 Hz, Codix nailer fully rebuilt in Sophograf France 2 years ago. The machine is now setup to make doubleside stringpallets Gjdpfx Aov Hh Hajk Uekb

Condition: used, Second-hand machine Gkedpezk Nkksfx Ak Usb Condition: as new Specifications and technical details to follow

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. Gkodpsykqxdefx Ak Uob The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: used, Demonstration unit Condition: as new Contents: Carry case Device Charger Charging cable Allen key Gjdpfx Akszk Nk De Uskb Safety goggles Plastic cover User manual This device is an unused display model

Condition: used, Demonstration unit Condition: as new Multi-shot anchor nailer for 34° plastic- or paper-bound nails from 40 to 50 mm Contents: Device Allen key Safety goggles Gjdpozk Nkqsfx Ak Ujkb Tool oil User manual This tool is an unused display item

Year of construction: 2021, condition: used, functionality: fully functional, T-nut inserting machine for Large Flange T-nuts Gsdpfjzbu R Eex Ak Ujkb

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Gkjdpfxel Smn Sj Ak Ujb Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), From company liquidation: Gsdpjtu U Hvefx Ak Ujkb Paslode 6625/160 SQ strip nailer Nails from 100-160mm 3.7-4.6mm thickness 7,1kg weight 72 nail magazine --ready for immediate use

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes LNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Three Bostitch nail guns with magazines for jumbo coils equipped with indicators. Possible to produce legs with 2-30 blocks/leg. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine can be equipped with an optimized block cutter, as well as automatic block feeding into the nailing machine. The block cutter can be mounted on the back side of the nailing machine or on the side. Dimensions for standard machine: - Boards: Length 600-3500mm, Width 60-125mm, Height 16-28mm - Blocks: Length 60-150mm, Width 60-125mm, Height 50-100mm Capacity: - 21 blocks/min Gkodpfx Akoi Hkqmo Usb Machine dimensions (without block cutter): - Length 9000mm, Width 1000mm, Height 1900mm The machines is CE-marked. The leg nailing machine can also be equipped with automatic stacker for finished legs. Do not hesitate to contact us for more information, pictures and videos.

Condition: excellent (used), pneumatically operated, water-cooled spot welding pliers with manual control valve Manufacturer: DALEX, Type 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 500 mm with double-acting cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke 0-25 mm with universal joint suspension and clamping bow 10 m connection cable with control cable also included: Gsdpfx Aoz Ak H Dsk Ujkb 1 piece DALEX synchronous control unit RS 12 with 3 m connection cable and 32 A CEE plug

Condition: reconditioned (used), Automatic Stapler PN 755 XI Inliner Universally applicable for walls, ceilings, and floors, for drywall and interior construction to fasten gypsum plasterboard and gypsum fiber boards. • For processing construction-approved staples. • Standard model with contact trigger. • Available as an automatic version for timber frame construction and prefabricated house construction. Gkodpfezc Emaox Ak Uob • Robust industrial design for continuous use. • Suitable for Fermacell, Rigips, Blue-Clad, and OSB. • Slider easily movable on the guide rail (Festool, Makita, etc.). • Significant advantage at low cost. • Simple and efficient operation with the automatic stapler. Technical data: Staple width 11.25 mm Wire gauge 1.53 mm Staple length 18 to 55 mm Magazine capacity 129 pieces Air consumption at 6 bar approx. 1.6 l/shot Weight 3.18 kg The stapler has been workshop-tested and is fully functional. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. Shipping is via UPS. Shipping costs within Germany: €11.90. If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. DNM1600 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck for pallet industry. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Dimensions for standard machine: - Deck board: Length 600-1600mm, Width 75-125mm, Height 16-28mm - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-28mm - Deck/Stringer pallet size: Length 600-1600mm, Width 600-1500mm 2-way pallet kit available as an extra option that makes it possible to produce stringer pallets/2-way pallets with a max. stringer height of 100mm. Gkodpfx Akjh Dpwco Usb Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 2500mm, Height 1900mm The machines is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking. For more information, pictures or videos take contact.

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. DNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing deck or stringer pallets (2-way pallets). Motorized conversion for stringer channels. User-friendly program, which means that the changeover takes place very quickly and the machine can save settings for over 100 different decks and pallets. Bostitch nail guns that are equipped with nail magazines for jumbo coils with indicators. Opportunities for manufacturing asymmetrical decks/stringer pallets. Equipped with flexible cassettes for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Gkodpeh Dpv Hjfx Ak Ueb Dimensions for standard machine: - Deck board: Length 600-3500mm, Width 75-125mm, Height 16-50mm - Stringer: Length 600-1500mm, Width 50-125mm, Height 16-100mm - Deck/Stringer pallet size: Length 600-3500mm, Width 600-1500mm Capacity: - 3 Deck/min (With 5 deck boards) Machine dimensions: - Length 5000mm, Width 4400mm, Height 1900mm The machines is CE-marked. The machine can be equipped with automatic board feeding and deck/pallet stacking. For more information, pictures or videos take contact.

Year of construction: 2022, condition: new, The semi automatic pallet nailing machine is an ideal tool for the production of various dimension pallets. Its construction allows fast and easy change of pallet nailing dimensions thus enabling a fast switch between standard and non-standard pallet nailing. Only one operator is needed and it reaches an output of 210 - 230 pallets per 8 hour shift (depending on the operator skills and work organization). Two nail guns with different size nails are hung in two spring balancers for better tool handling. Pneumatic block holders and pallet lifters ensures high quality and easy handling. Gkjdpfxsht Eyaj Ak Ueb

Condition: used, Year of construction: 2010, number of aggregates 2 St. working width 2000-3500 mm work height max. 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----- Manufacturer’s technical description: M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm Max. window thickness 160 mm 190 or 250 mm* Max. window weight 150 kg 200 or 400 kg* Loading station 2000 mm 3500 mm Unloading station 2000 mm 3500 mm Choice of silicone: Standard 1 colour 2 or 3 colours Master head 1 2 Sealing of timber panels no yes Formulation adapted to the type of elements no yes Synchronised conveyor belt no yes for heavy loads and/or conveying in both directions Double movable crossbar for flush-mounted hinged window sashes no yes *Please contact us for greater thicknesses or weights Gksdpozmy Ifefx Ak Usb Optimisation of the sealing process: The M9Cb robotic sealing system revolutionises the sealing process by injecting exactly the right amount of silicone, thereby preventing unwanted streaks. It enables the glazing beads to be ‘nailed’ invisibly and saves the time required to cover the nail heads. The precision ensures high-quality, uniform sealing, which guarantees optimal watertightness whilst maximising the clarity of the units. With a feed speed of approx. 2 metres per minute, it offers fast and efficient processing on both sides simultaneously (on average 4 minutes per unit). More space available: No more lack of space in the workshop! The M9Cb operates vertically and therefore takes up very little floor space. Leaning against a wall or partition, it frees up the space previously occupied by horizontal sealing tables. In addition, a strategically positioned conveyor belt can also serve as a vertical glazing table, thereby optimising the layout of the work area Automation of sealing: To ensure a seamless seal, it is no longer necessary to juggle the window unit or struggle with fitting seals. The M9Cb automates this laborious process on both sides Time savings: Thanks to the M9Cb, the workflow is no longer one-dimensional. Whilst the machine takes care of sealing the windows and doors, the operator can work on other tasks, e.g. glazing, blocking, packaging... This versatility enables the operator to diversify their activities and thus offers them a more rewarding experience. ----- ----- Price of the above machine on request! -----...

Condition: new, Year of construction: 2026, functionality: fully functional, Our company specializes in the production of tables for pallet manufacturing. We offer several types of tables, both with and without pneumatic controls. Advantages of our tables: - Solid and simple construction - Ability to produce various types of pallets in different sizes - Minimum working area of the table: 800 mm x 600 mm - Maximum working area of the table: 3300 mm x 1200 mm - Balancers (counterbalances) supporting nail guns - Fast and easy adjustment of the table to different pallet dimensions - Only one operator required - Low price Possible to ship the table via courier. Gsdpfx Aown Irqsk Uokb Custom-made tables available for non-standard pallet dimensions.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. Gkodpsygx Hnofx Ak Ujb The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. LNM-355 is a flexible, compact and very efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Five pneumatic nail guns with magazines for jumbo coils equipped with nail indicators. Possible to produce legs with 2-5 blocks/leg. Possible to nail 1-9 nail in each nail pattern. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. Manual or automatic adjustment for block positions. Big buffer for finished legs. The machine can be equipped with an optimized block cutter, automatic block feeding, automatic board feeding and automatic leg stacking. Material dimensions for a standard machine: - Boards: Length 500-3500mm, Width 60-150mm, Height 16-32mm - Blocks: Length 60-150mm, Width 60-150mm, Height 50-125mm Capacity: - 35 blocks/min Machine dimensions: - Length 3800mm, Width 5200mm, Height 2000mm The machines is CE-marked. Gkodpjw R Sl Sjfx Ak Usb Do not hesitate to contact us for more information, pictures and videos.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: A1106011/1300, working width: 1,300 mm, overall weight: 7,500 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gkjdpfxezzbcgj Ak Ujb Max. working width: 1,300 mm Max. workpiece thickness: 120 mm MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse rating: 63 A Connected load: 17.0 kW Weight: 7,500 kg Transport weight: 7,500 kg Number of transport packages: 8 units EQUIPMENT 4 spray guns Wagner pump system

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm Gkodpfx Aszzrmpok Ujb - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: good (used), functionality: fully functional, For sale is a used nailing machine from the manufacturer Bohm & Kruse, designed for the production and assembly of wooden crates. The machine is specifically designed for nailing crate parts and also features a riveting device. For safety reasons, the machine is enclosed and equipped with a two-hand control. Technical data / equipment: Manufacturer: Bohm & Kruse Machine type: Crate nailing machine / Nailing machine For nailing crate parts Riveting device available Gkedpfx Aozym Nijk Usb Multi-nailing head Workpiece support / workbench Adjustable workpiece stops Safety enclosure with protective grille included Two-hand control Emergency stop Robust industrial design The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse multi-nailing machine, type II 10/600, machine number 6604. This machine is suitable for efficient series production and for simultaneously driving multiple nails, for example in the manufacture of wooden crates, packaging, and similar wooden structures. The nails are automatically fed to the nailing heads via multiple feed tubes. The working height is adjustable. In addition, the machine is equipped with a riveting device. Technical data: Manufacturer: Bohm & Kruse Type: II 10/600 Machine number: 6604 Design: Multi-nailing machine Working width: approx. 600 mm Number of nailing positions: up to 10 Automatic nail feed via feed tubes Nail size: approx. 1.1–1.4 mm × 25–40 mm Adjustable working height Riveting device available Mechanically adjustable units Robust cast iron/steel construction Transport dimensions: approx. 1,600 × 1,600 × 2,400 mm Weight: approx. 900 kg Used, robust industrial machine with signs of wear and tear due to age and use, see photos. Godpezxxuuefx Ak Uskb Transport is possible for an extra charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. If sold to commercial customers, the warranty will be excluded due to the machine's age. Technical data and equipment may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. Gsdozyq Ebopfx Ak Uekb - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 3000 is an automated portal nailing machine for the efficient production of pallets and boxes. With up to twelve nailing units, two work areas, and four clamping stations, it offers high throughput with reduced setup time. The nailing units, which are controlled in groups, are manually adjusted to the pallets to be produced and automatically moved via the central portal. A 7-inch touch display, extensive safety features, and options such as central height adjustment, robotic stacking, or remote maintenance make the StoNail 3000 a reliable solution for companies that want to efficiently produce pallets with regular nailing patterns. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Box walls & wooden packaging Nailing table with nail bridge: Robust frame construction with a 70° inclination angle for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 6000 x 1700 mm or 2 pallets: max. 2500 x 1700 mm Option: Extension or shortening of the machine frame by 2000 mm or according to customer requirements Modular pallet stop system for inserting the loose wood and blocks: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, crossbars, and top boards Rivet plates can be used at all positions Stringer prefabrication Gkodpferalk Rex Ak Ujb Option: Equipment with laminated wood panels for custom templates Frequency-controlled nail bridge for positioning the nailing units Equipped with 8 nailing units incl. feed cylinder, nailing unit holder, release, and nailing shoes for limiting the insertion depth Manual quick adjustment of the nailing units depending on the pallet format Collision monitoring: The movement of the feed cylinder is constantly monitored Start button located directly on the nail bridge Nailing units: Uniform nailing unit holder for large and small nail guns Maximum nail length: 90 mm (longer nails available upon request) Option: Equipment of the nail guns with Maxi-Coil magazines for up to 1000 nails Programming: Simple, intuitive programming. The machine takes over part of the programming and performs a learning cycle before the first program start to automatically detect the nail positions. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German, English, Czech, and Taiwanese Safety equipment: Emergency stop button on the machine and on the control panel Start emergency stop on the nail bridge Spring-return emergency stop on the nail bridge Option: Safety foot mats for person detection Key features and options can be found on our website.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails Godpfjzap I Ajx Ak Uekb - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible