Used Wire Edm for sale (3,035)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, controller model: AGIEVISION 5, The seller provides a 6-month warranty on all machine parts. TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 426 mm U/V-axis travel: ± 70 mm Machining performance Max. taper: 30° at 100 mm height Max. cutting rate: 500 mm²/min Achievable surface quality: Ra: 0.20 µm Available wire diameters: 0.15 – 0.33 mm Workpiece data Max. workpiece dimensions: 1,050 x 650 x 420 mm Max. workpiece weight (in bath): 400 kg Max. workpiece weight (without bath): 800 kg Generator & Control System Generator: AGIE IPG-V Control System: AGIEVISION 5 MACHINE DETAILS Dimensions (L) x W x H): 1,940 x 2,300 x 2,600 mm Net weight: 3,460 kg Iasdpfx Ajwh Sglehvop EQUIPMENT - Water bath machine with automatic wire threading - Automatic rethreading after a wire break - AGIEJOGGER handheld unit for convenient setup

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Iodpow Hxqnjfx Ahveap Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation with our customer until recently and is available immediately.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training. Iodpfxewqcm Uo Ahvoap

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total length: 2,400 mm, total width: 2,800 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 4,500 kg, AGIECUT Vertex 3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and extensively tested by us after receipt of order. Iaedpfx Ajw Dn Svehvjp Including user training at Techma on your refurbished machine Optional: Transport, commissioning, training, chiller

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total length: 1,640 mm, total width: 2,040 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, empty load weight: 2,580 kg, Equipment: documentation/manual, AGIECUT Progress 2 Year of manufacture: 2004 Travel path: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-Axis travel path: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Ijdpfx Ahewvqk Sevsap Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG generator with power module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled upon receipt of an order. A test cut with optimal surface finish is performed for final approval. We are happy to offer on-site commissioning and training. Optional: - Transport - Chiller unit - Clamping devices

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel paths: X= 800 mm, Y= 550 mm, Z= 525 mm Travel paths: U= 800 mm V=550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and re-threading after wire breakage With automatic front door Includes AGIEJOGGER hand-held box for convenient setup Iaedpfxewvqwrj Ahvop AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and overhauled upon receipt of your order. You will receive a 6-month warranty on all machine components. We are also happy to offer commissioning and training services.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 935089, - Water bath machine with automatic wire threading - Closed diamond wire guides for different wire diameters - Collision protection on all 5 axes (ICP) - Pictured clamping accessories included TECHNICAL DETAILS travels X / Y / Z: 550 / 350 / 400 mm travels U/V axis: 550 / 350 mm Conicity: max. +/- 30° at 400 mm height workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) workpiece weight: max. 1500 kg Surface quality: max. Ra 0.22 μm Cutting speed: max. 300 qmm/min Ijdpfslru Rbsx Ahvsap Available wire diameters: 0.15 - 0.30 mm Control: Charmilles Millenium with Windows operating system (12"-TFT touch screen). MACHINE DETAILS dimensions (length x width x height): 2600 x 2810 x 2240 mm net weight: 3300 kg supply voltage: 400 V / 3 phases / 50/60 Hz Connected load: 10 kVA LAN connection: included, for network integration

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg Iaedpfxjw Htdpj Ahvep The machine was in use with our customer until recently and is available for immediate delivery.

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 500 mm Travel distance Y :350 mm Travel distance Z: 300 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 780 mm table size Y: 630 mm with AWF ( Automatic Wire Feeding ) U / V axis: 42 mm generator: 50 Ampere Iodpew S Egfefx Ahvsap submerged

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. Isdpfjxfaqksx Ahvjap New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Ijdpfxov Tpnro Ahvjap Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Iasdpowr Aclofx Ahvop Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Iodpfx Aexbm Uzohvoap Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iajdpstylpisfx Ahvop

Condition: new, The clamping devices from Becker Erodiertechnik are suitable both for the initial equipment of your EDM machine or expansion of an existing equipment. Round parts, small pins or punches can be clamped quickly and precisely just like larger plates. From the fixed holder with vice or clamping beam including pendulum function, we manufacture everything ourselves at the Karlsbad location. Adaptations to other interfaces or systems are possible. We manufacture our products from stainless steel and harden them. Please do not hesitate to contact us if you have any questions or need technical support. Iodpfslk Hvrsx Ahvsap

Condition: ready for operation (used), Year of construction: 2007, operating hours: 33,995 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, Wire EDM machine has been recently serviced and cleaned! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 550 mm Travel Z-axis: 525 mm Workpiece dimensions Workpiece height: max. 510 mm Workpiece width: max. 1,000 mm Iajdpfx Ahjwzhqmsvep Workpiece length: max. 1,300 mm MACHINE DETAILS Type of input power: Three-phase current Total weight: 6,800 kg Operating hours Power-on hours: 108,824 h Working hours: 33,995 h

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 2,350 mm, total length: 2,500 mm, total width: 2,300 mm, workpiece height (max.): 260 mm, workpiece width (max.): 650 mm, workpiece length (max.): 940 mm, overall weight: 6,000 kg, CNC wire cutting machine in very good condition. It has been thoroughly inspected by a Makino service technician. The machine has been cleaned, and all pumps have been checked, newly mounted, and sealed. Ijdpfxewww Nqs Ahveap

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition year 2002 Isdpexf I D Esfx Ahvsap

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,088 h, functionality: fully functional, machine/vehicle number: 073C1923, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, overall weight: 3,100 kg, TECHNICAL DETAILS Travel Paths X-axis travel: 550 mm Y-axis travel: 370 mm Z-axis travel: 410 mm U-axis travel: 120 mm V-axis travel: 120 mm Ijdpfjw Nf R Ejx Ahveap Maximum workpiece weight: 1,000 kg MACHINE DETAILS Weight: 3,100 kg Machine hours: 24,088 h

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iaedetylpcopfx Ahvjp

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Iajdoxnx Itspfx Ahvep Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) Iasdpfx Ahjnh R Nksvjp TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, - CHMER-FANUC Control - Max. workpiece dimensions: 800 x 560 x 215 mm - Max. workpiece weight: 350 kgs - X-axis travel: 400 mm - Y-axis travel: 250 mm - Z-axis travel: 220 mm Iaedpfx Aheyr H Rfevsp - U/V axis: 60/60 mm - Maximum chamfer cut: +/-14.5 degrees - Wire feed speed: max. 330 mm/s - Machine dimensions (L x W x H): 2100 x 2600 x 2000 mm - Machine weight: approx. 2700 kg Accessories - EROWA collection system - Cooling water system - Dielectric cooler - Machine documentation A robust, precise, and high-quality Taiwanese wire EDM machine is for sale. The machine was used by a small family business that closed at the end of last year.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,700 h, X travel 600 mm Y travel 400 mm Z travel 350 mm U travel 150 mm V travel150 mm Max. workpiece weight 1 000 kgs Size of working area (L × W) 1 050 × 710 mm Wire dia 0,1 ‒ 0,3 mm (optional 0,05 mm is still possible) Iedpexgqitofx Ahvjap Range of wire tension ~3 ‒ 23 N Max. wire speed cca. 420 mm / s Dimensions (L × W × H) cca.. 2 575 × 2 945 × 2 345 mm Place required (for installation) ca. ~3 860 × 4 245 mm Weight cca.4600 kgs High from floor to table surface cca. 995 mm Power required 3 Phasys, 50/60 Hz, cca. 13 kVA Tolerance: “Fine Corner Control”, “Digital PIKA-W Plus” options Visual / additional functions / controller: Smart Pulse (SPW) generator, Linearmotor (X/Y/U/V), absolut linearscales, ceramic working area, automatic wire threading (AWT), wire rotation, sparing power circles, optional Extra-taper (±45°) function, etc.

Condition: good (used), James Burn JBI Wire O PB 3000 Calendar Perforator This machine is in excellent condition and has been used very little. The machine perforates a block of material and also has a built-in spiral crimper. Spiral capacity: 3/16″ – 1 1/4″. Perforator working width: 320mm Stack height: 2mm Perforating tool: 3:1 round hole Machine cycle triggered by a foot pedal. Weight: 50kg Power: 230V Iaedpfxjyurzhe Ahvep Made in the UK.