Used Wilhelm for sale (127)

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power: 4 kW Lredsiw D Uhepfx Aftep Table size: 800 x 800 mm Spindle diameter: 30 mm Dust extraction port: 120 mm Handwheel for height adjustment Adjustable stop blocks Right/left rotation Spindle speeds: 3/4/6/9000 rpm No brake

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment Ledetwqn Sopfx Aftorp 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, roll diameter: 600 mm, saw band length: 4,500 mm, Cutting height 300 mm Cutting width 570 mm Table size 610x700 mm Extraction 120 mm Band saw guide above and below Stop Lredpfsvt Sxgox Aftop Total height of the machine approx. 2100 mm

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Ledpfxsv Npw Ej Aftsrp Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Chassis

Condition: like new (used), functionality: fully functional, total width: 2,600 mm, total height: 1,250 mm, Motor power: 0.75 kW with a drill head for drilling corner bearings and olives Lrodpfjx Ez Uaex Aftop automatic height sensing

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Lrsdpfx Aowhn T Ueftsp

Condition: reconditioned (used), Year of construction: 1997, Connected load 380V 11kW 30A electric swivel -5° to +45 Lrodjub S U Sjpfx Aftep electric height adjustment digital display clockwise/anticlockwise rotation speeds 3000/4500/6000/9000 rpm Milling fence with siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Control panel on top Extraction connection 2x120 mm

Condition: good (used), Year of construction: 1982, functionality: fully functional, Power 380V 3.3A Motor power 1.1kW 2800 rpm Automatic pneumatic control with control panel Drill head with 23 spindles, pitch 32 mm Drill hole depth adjustable Lsdpfxeq Auwtj Aftorp drill shaft 10 mm position adjustment 5-60 mm Clamping height 80 mm Passage width 800 mm Dimensions: 1200 x 900 mm Weight approx. 400 kg 1x setting gauge row bore 1x setting gauge side stop 1x stop ruler 1500 mm 1x fence 2000 mm

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Lsdjq Auzaopfx Afterp Milling motor bottom 1.8 kW Sliding table with Superfix manual clamp Saw blade 2 slitting discs

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm Ledpfxjmdr A Ee Afterp diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Cable + plug, 16 A Lredpfxeigadlo Aftep 1 set of operating tools 1 set of feeler rollers

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Tank capacity Tank capacity 2 x 100 l Lsdjy Ifmrepfx Afterp Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Condition: new, Year of construction: 2026, functionality: fully functional, Precise and clean edge processing without the need for extensive post-processing of the workpieces. The corner profiling unit handles the final corner processing. With a compact design of only 3.60 m in overall length, even short workpieces of just 120 mm (200 mm with corner rounding) can be processed professionally. Equipped with a joining unit with 2 diamond-tipped joining cutters, a Teflon-coated gluing unit, a pre-trimming unit, an HF miter saw station (motor with 2 saw blades), an HF combination milling unit, and an HF corner profiling unit. Controlled via a rotating 10-inch color touch screen. Special accessories included: • Radius scraper blade • Surface scraper blade • Cleaning spray unit • Anti-stick spray unit Lrjdpfsza D S Aex Aftsp

Condition: new, functionality: fully functional, Year of construction: 2025, Stepless, convenient control of the travel speed via rocker switch. Low-speed function enables slow maneuvering with a vertical drawbar. Lodeza Enrspfx Aftorp High-performance and maintenance-free lithium-ion battery. Integrated battery management system. Battery discharge indicator on the drawbar. Load capacity: 1.5 t Lifting range: 80 - 195 mm Lifting speed: 0.015 m/s Lowering speed: 0.05 m/s Travel speed: 4.9 km/h Turning radius: 1340 mm Max. gradient with load: 6 % Max. gradient without load: 16 % Drive motor power: 0.75 kW Lifting motor power: 0.5 kW Battery: 24 V / 20 Ah Battery operating time: 3-4 h

Condition: used, 1x Saw, pneumatically adjustable, 2.5 HP Ljdpfeigabxox Afterp 1x Dowel milling arbor, 6 HP 1x Groove milling arbor, 6 HP Pneumatic clamping with foot valve Sliding table with stop and extension

Condition: new, Year of construction: 2023, machine/vehicle number: 200642, functionality: fully functional, volume flow: 3,200 m³/h, RIEDEX - Deduster Model DM-200/M-B max. volume flow 3200 m³/h Ljdpfjtwz Hljx Aftjrp motor power 4.0 kW without extinguishing device Left-hand version motorized cleaning with chip garbage cans

Condition: reconditioned (used), functionality: fully functional, Total length 3800 mm, two units, swivels 45° in both directions, cutting width 150 mm, extraction 2x 90 mm Ø – completely workshop overhauled. Lrsdjx Ezycjpfx Aftjp

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Lrodpfxsx Ez Nks Aftep

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Lredpfx Afewrb U Totop

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Lrsdpfx Afstppzvetjp Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: reconditioned (used), functionality: fully functional, Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, turntable, jointer-thickness planer width 300 mm with three-knife shaft, table dimensions 310 x 1500 mm, clearance height 230 mm, circular saw 0-45° tiltable, max. cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router with two speeds 3100 / 6200 rpm, max. Cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router arbor 30 mm, height adjustment max. 110 mm, slot drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm Lrodpotqva Defx Aftep

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Lrsdpfx Aoh Ux Sujftep Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Cut-off saw, diameter 300 mm Milling spindle, diameter 40 mm Sliding table with Festo length stop Dust extraction port for saw, 120 mm Dust extraction port for milling machine, 140 mm Cable + plug, 16 amps Lrodoiau I Sepfx Aftop Without operating tools Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: reconditioned (used), functionality: fully functional, Power connection 400V, 1.5kW Lrsdpfx Afjittnlstjp Roller diameter 400 mm Belt length min./max. 2900/3000 mm Cutting height 190 mm Table is tiltable W x H x D: 1000 x 1970 x 730 mm Weight approx. 350 kg

Condition: reconditioned (used), Year of construction: 1966, machine/vehicle number: 662310, functionality: fully functional, Rated power at 380V: 3kW + 4kW Lredpfeiw D N Dox Aftep Clockwise/counterclockwise rotation Star-delta switch 2800/4500/6000 RPM and 5600/9000/12000 RPM