Used Wilhelm for sale (148)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis Dcedpol H E H Hsfx Ab Ter

Condition: used, Year of construction: 1998, functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters. Dsdpfx Aswhn T Ieb Tecr

Condition: good (used), functionality: fully functional, machine/vehicle number: EF17DL 50980, Year of construction: 2005, operating hours: 9,910 h, load capacity: 2,500 kg, Mitsubishi Gas-Powered Forklift with Swing Arm Model FG25N Year of Manufacture 2007 Rated Power 42 kW Dodpfxev Sqd Ej Ab Tjcr Load Capacity with Attachment: 1000 kg Load Capacity without Attachment: 2500 kg 9,910 Operating Hours Available immediately! Further information upon request!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Dcjdpfsph U Ansx Ab Tsr Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 200642, volume flow: 3,200 m³/h, RIEDEX - Deduster Model DM-200/M-B max. volume flow 3200 m³/h Dedjtwz Hlopfx Ab Tjcr motor power 4.0 kW without extinguishing device Left-hand version motorized cleaning with chip garbage cans

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024009, type of input current: three-phase, input voltage: 400 V, volume flow: 4 m³/h, negative pressure: 2.75 Pa, Oil mist separator filter system HEAB OUK 8,000 and 3x HEAB EMU 10-L Year of manufacture 02/2024 Motor power: 5.5kW Voltage: 3x400V 50Hz Fan type: VE 5,500 Vacuum pressure max. 2750Pa Volume flow (AP): 4000m^3/h Filter type 1: Pre-filter PPI60 Filter type 2: F9-M100089 Filter type 3: H13-M100137 Machine number: 2024009 Included is a piping system, including 6 extraction hoods and 3x HEAB EMU 10-L filter systems. Dsdpfoultu Asx Ab Tscr

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Dcodpfxspyg N Ae Ab Tsr Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Dsdpswrb U Tofx Ab Tocr

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 48,412 h, TRUMPF TruLaser 7040 Double-head machine Year of manufacture: 2012 Power: 2 x 3200W Dodpfsvnra Hex Ab Tjcr Operating hours: 48412 hours Machine weight: 16,000 kg Available from Q2 2025! Further information on request.

Condition: ready for operation (used), Year of construction: 2023, OEM – laser marker (laser class 4) Laser source is a 20 Watt fiberlaser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Further applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). Dcjdjn Atmvjpfx Ab Tsr The laser is prepared for an integration into a ‘higher level system’. For this interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: as good as new (ex-display), functionality: fully functional, milling spindle length: 125 mm, height adjustment type: electric, table length: 2,500 mm, power: 7 kW (9.52 HP), tool diameter: 240 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,500 rpm, Including the following special accessories: Motorized height and angle adjustment of the work unit with digital displays Milling fence with crank adjustment, milling fence steplessly adjustable via easily accessible cranks from the front: Adjustment of the entire fence relative to the tool - Adjustment of the front ruler to change cut depth - Mechanical digital displays - Wood fence jaws and connecting bridges Aluminum fence jaws instead of the wooden ones LL version for profiling work with two cast iron table extensions complete with: - Table extensions left and right with a total length of 2,500 mm - Extendable workpiece support - Emergency stop button Dcjdpfx Abowrhvko Tor

Year of construction: 1990, condition: used, Power supply 400 V 3 kW Glue roller Milling unit 2x flush roll material up to 0,4 mm LxWxH: 3150 x 680 x 1250 mm weight approx. 400 kg Conversion to 2 mm PVC edges possible = additional price 1.000,00 € Dcedpfxokkfk Ne Ab Ter

Condition: new, Year of construction: 2024, saw band length: 4,080 mm, table width: 550 mm, table length: 860 mm, space requirement width: 930 mm, space requirement length: 1,150 mm, space requirement height: 2,000 mm, power: 3 kW (4.08 HP), empty load weight: 280 kg, Closed base with high stability Safe and smooth saw cuts in wood Heavy, tilting cast-iron work table with polished surface Powerful motor Safety switch stops the machine when the door is opened and prevents unintentional restarting and starting Dsdpfx Abjtp Hbvj Tjcr Cast iron flywheels ensure smooth running Set cutting width can be easily read on a scale

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood Dodpstwz Tlefx Ab Tecr 1 pc. Machine stand

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 270018, Connected load 380V 6,6A 3kW Dsdpfx Absh Uxq Ts Tecr band saw length 5110 mm fence suction 100 mm machine table tiltable with hand wheel Foot brake

Condition: reconditioned (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 7867/162, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin Djdpeh Ux Rwefx Ab Tscr right/left rotation 2 speeds spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connecting value 380V 1,85kW 4,8A pressure beam length 3100 mm pneumatic material clamping with hand lever valve chassis stop ruler 520 mm long 6x support brackets Dcsdpfx Abeh U Dbrj Tjr

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1277/8-71, Connected load 380V 7A cutting length 4300 mm cutting height 1925 mm rack height 2210 mm machine height 2500 mm room height 2540 mm Djdpfx Abeh U Sqre Tocr trimming height 1870 mm Passage height 1940 mm

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Cross-section milling machine for large and complex profiles of all types for furniture, stairs, and balcony railings Tool clamping width 250 mm Maximum tool cutting diameter 250 mm Milling height 200 mm Milling depth 65 mm Spindle diameter 40 mm Motor power 11 kW Milling spindle speed 6000 rpm Table size 1000 x 410 mm 2 pneumatic clamps, two-hand operation Dcodpfx Aov Up U Isb Tsr

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Djdpfevi H Disx Ab Tocr Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Dcjdpfoumw Sbjx Ab Tsr Hettich drilling head with pressing die €550.00

Condition: new, Year of construction: 2023, Basic equipment Diameter planing shaft 70mm, 3 knives of 410 mm Anodized planing fence 90°- 45° Total length 1800 mm Dressing fence 1500 x 150 mm Maximum chip removal 4 mm Passage thick planer 410 mm x 230 mm weight: 325 kg incl. special accessories: TERSA cutter block Dcedpfx Absmft Nke Tsr

Condition: not inspected (used), Milling fence with wooden stop jaws, each 760 mm long 30 milling arbor incomplete control panel on top cable w. plug 16 A 130 mm suction diameter table 1000 mm wide, 800 mm deep Dedpfx Absi Atfte Tscr motor approx. 4 kW, total power consumption 12,5 Amp. belt tension via handwheel spindle height adjustment via handwheel infeed jaws individually adjustable via handwheel