Used Vertical Panels for sale (19,037)

Condition: repair required (used), Year of construction: 1997, machine/vehicle number: 26992, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 415 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,900 mm, cutting width (max.): 4,500 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, rotational speed (max.): 4,750 rpm, STRIEBIG Econom II Vertical Panel Saw (1997) Fully operational Striebig Econom II vertical panel saw removed from our professional joinery workshop following replacement with a newer machine. The machine is fully functional and was in regular use until removal. It cuts accurately, the carriage runs smoothly and all operating functions work as intended. The saw is being sold as in need of repair because it does not have a functioning motor brake, meaning it no longer complies with our workshop's health and safety requirements. It should therefore be inspected and recommissioned by the purchaser before being returned to service. Specification Ibsdpfx Aezimnkspcjb Manufacturer: Striebig Model: Econom II Year: 1997 Machine No: 26992 3 kW motor 415V, 3 Phase Maximum cutting height: 2200 mm Blade speed: 4750 rpm Dust extraction connection Viewing is welcome. Collection only from Finchampstead, Berkshire. Buyer responsible for loading and transport.

Condition: used, Year of construction: 2021, Vertical panel dividing saw Manufacturer: Felder Format4 Type: Kappa V80 Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Saw blade diameter: 300 mm Cutting depth: 80 mm Cutting length: 5300 mm Ibsdpfx Apjzuy Dveceb Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 2,150 mm, cutting width (max.): 5,300 mm, total length: 5,510 mm, overall weight: 950 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum cutting height (vertical): 2,150 mm Maximum cutting height (horizontal): 2,070 mm Maximum cutting width: 5,300 mm Maximum cutting depth: 80 mm Minimum saw blade diameter: 300 mm Maximum saw blade diameter: 300 mm MACHINE DETAILS Isdpfx Apoy Nxwtocsbb Voltage: 400 V Power consumption: 8 A Fuse: 16 A Power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 5,510 x 1,720 x 2,920 mm Weight: 950 kg Transport packages: 1 EQUIPMENT CE marking Horizontal cutting Vertical cutting

Condition: excellent (used), functionality: fully functional, Panel saw Maximum cutting size: 5300 × 2240 × 80 mm Maximum cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade mounting hole diameter: 30 mm Acoustic pressure level at the workstation (LpA): 83 dB Blade speed: 4800 rpm Number of dust extraction nozzles: 1 × Ø 140 mm Compressed air connection: 6–10 bar Connected power: 7.5 kW Electrical supply: 3 × 400 V / 50 Hz Overall machine dimensions: 6620 × 3010 × 1742 mm Ijdpfozkh R Njx Apcsbb Saw weight: 1100 kg

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Iodpfx Apez Di Nwocebb Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: new, Year of construction: 2026, -Maximum horizontal cutting length: 2500 mm -Maximum vertical cutting length: 2200 mm -Maximum vertical cutting height: 1600 mm -Maximum horizontal cutting height: 1400 mm -Maximum cutting thickness: 60 mm -Engine power: 5 HP (3.7 kW) -Blade diameter: 250 mm -Blade speed: 5300 rpm Ibedpfszycl Tjx Apcob

Condition: new, Year of construction: 2026, Maximum horizontal cutting length: 4200 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2080 mm Maximum cutting thickness: 60 mm Motor power: 5 HP (3.7 kW) Iodpfxexga H Io Apcjbb Blade diameter: 250 mm Blade speed: 5300 rpm Horizontal digital display Vertical digital display

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 5014 BP, functionality: fully functional, cutting height (max.): 1,600 mm, saw blade diameter: 250 mm, empty load weight: 500 kg, cutting depth: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height, vertical: 1,600 mm Max. cutting height, horizontal: 1,550 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Arbor hole saw blade diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6.6 A Fuse: 16 A Power: 3.0 kW Iedpfx Aezdzy Repcobb Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Weight: 500 kg Transport packages: 1 EQUIPMENT Horizontal cutting Vertical cutting

Condition: used, Year of construction: 2023, Cutting length ca. 5300 mm Ibodpfx Apjvwfcaecjb Cutting height ca. 2150 mm

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Ibjdpfxsyh Hc Rs Apceb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in excellent condition. There is a possibility to test it. Automatic size adjustment and forward feed. Ibjdpjztwtlofx Apcsb

Condition: new, Engine power: 5 HP Blade diameter: 250 mm Blade speed (RPM): 5300 Automatic, pneumatically operated sliding table Galvanized steel and polyethylene supports Maximum horizontal cutting length: 4200 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2080 mm Ibodpfx Apsznm Tkscsb Maximum cutting depth: 60 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Ibedpfx Aoyx H Dtjpcsb Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Condition: new, Cutting length 4300 mm Cutting height 2150 mm automatic , ELCON precision panel saw type D 215 ----- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----- Special price "Partnership Edition" ex works in this version: on request! ----- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,990.00 plus statutory VAT ----- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----- Technical information according to the manufacturer - without guarantee! Ibjdpfji Hc S Dex Apcsb

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Specifications: Max cut dimensions: 370 x 120 x 225 cm Year: 2006 Saw-blade: Ø 300mm, shaft 30mm Voltage: 400V Amperage: 13amps Ijdoxg Ig Ajpfx Apcsbb Motor: 5.5Kw Rev: 4200tpm Weight: 500kg Material clamp: Pneumatic (6-10 bar)

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Ibjdpfovwfnpjx Apcob

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Ibsdpovwfmxefx Apcjb

Condition: used, Year of construction: 2006, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 303 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Lower support: retractable roller support Material support: closed wood support Small parts support: Yes Ibedezt N A Sepfx Apcjb Measuring system: horizontal/vertical digital Swiveling saw head: pneumatic Saw feed: manual Mounting: wall mounting Dust extraction: external dust extraction Saw beam locking: automatic Description: with scoring saw Motor power: 5.5 kW Location: Nattheim

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA Iedpfx Apjyug R Rjcsbb • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic material support: plastic strips, retracting measuring system: digital display swiveling saw head: manual Ibedpfez Aibgex Apcob saw feed: manual mounting: free-standing extraction: external locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Location: Nattheim

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: - Control system: 7.0" touchscreen ConnectTouch - Cutting height and cutting angle are electronically controlled, with digital input of cutting height and angle (controlled positioning of the motorized axes) as well as movement of the motorized axes in hold mode (movement of the axes via push button); Display resolution: 0.1 mm or 0.01°; Repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron; Table extension as standard across the full table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite construction, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm; Main saw blade ø 30 mm with auxiliary holes, Scoring saw blade ø 36 mm; Tool cutting width max. 20.0 mm for machines with single-sided tilt, 6 mm for machines with double-sided tilt; Saw blades up to 350 mm can be recessed under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool swivel: 0° to +47°, optionally -46° to +46°; Swivel is only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / Saw blade ø 450 mm; optionally: max. 205 mm / Saw blade ø 550 mm T7710/1: +45°: 106 mm / ø 450 mm; optionally 141 mm / ø 550 mm T7710/2: +45°: 104 mm / ø 450 mm; optionally 144 mm / ø 550 mm -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, optionally up to 11 kW; due to its design, the motor can be overloaded several times its rated power for a short time and therefore offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is pivotably mounted around its vertical axis. In addition, it can be swivelled to the right, so that even larger components can be easily processed - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stops; Measurement display via scale with magnifying glass; Cutting length 95 - 2000 mm, extendable up to 3220 mm - Crosscut table: Made of steel with powder coating, workpiece support in anodized aluminum, two sliding struts to extend the support surface; Length stop can be placed in the front and rear position without lifting; One-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating; Cast iron: Table surface finely milled; Aluminum: Aluminum components anodized - Protective cover / Extraction: Height-adjustable protective cover including interchangeable rear part for angular cuts; Protective cover for saw blades up to ø 450 mm (optional 550 mm); Extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; Total extraction connection Ø 140 mm; Minimum air volume: Vmin 18.5 m3/min at 20 m/s, underpressure 1,400 Pa - Electrical equipment: Connection Ibodpfx Apoz A Hh Uscjb

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Isdpfxszzbbcs Apcobb Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT CE marking

Condition: used, Year of construction: 1994, Cutting length 5300 mm, cutting height 2200 mm, cutting height 80 mm, manual feed, measuring system: scale, free-standing supports, rated current 21 A. Storage location: Nattheim. Ijdpfjytrhrjx Apcsbb

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Iodpfx Ajzx N Thspcobb Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT Iedpfxjzzx Hce Apcobb CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.