Used Panel Packaging Lines for sale (26,853)

Condition: used, PRODUCTION OF: ➢ Shortbread cookies in single-serve packs of 2x2 or 3x2, subsequently packaged in tray + flowpack ➢ Crispy cereal and cocoa biscuit snacks ➢ Cream cheese-filled cracker sandwiches 1. PROCESS LINE COMPONENTS include: - IMAFORNI disc oiling machine - No. 2 EUROINOX chocolate storage silos with related piping - Mobile mixer - SOLLICH extruder / filling machine - LICO dosing units - No. 4 AZO portable tanks - SHERPA elevator - TECNOFOOD mixers - OPM ultrasonic cutter (currently not in use) - FANTINI tilting conveyors, aligners, and overhead bypass Including overhead conveyor (excluding M3) - FPE capping machine with associated 3-flavor cream feeding system Including: - Conveyor systems - Row alignment setup Nkodoyc Ngdopfx Ad Nst - Biscuit preparation - Filling (with dosing heads) - Discharge on individual belts 2. COMPLETE PACKAGING LINE: - No. 1 distributor system with row phaser, single-pack feeding branches, and buffer storage - No. 3 TECNO PACK single-pack flow wrapping machines (including final distribution station) - No. 3 LIVETECH tray loaders (year 2019) - No. 2 JOINTECH multipack wrappers (without accessories) - No. 3 RAMA tray forming machines - No. 1 OPM case packer (LIVETECH retrofit) - No. 1 OPM carton opener (LIVETECH retrofit) - No. 1 OPM glue closing machine (LIVETECH retrofit) CONTACT FOR MORE INFO ON PRICE AND CONDITIONS. LIMITED AVAILABILITY, ONLY FOR A FEW DAYS.

Condition: used, Year of construction: 2004, Sealing bar length 2500 mm Maximum width of upper reel 2400 mm Maximum width of lower reel 1450 mm Width of conveyor belt 1300 mm Length of entry belt 4800 mm Maximum useful height 800 mm belt speed 5-25 m/min with inverter Nodpfx Adowh A Hcj Njkt heat shrink tunnel kw 50

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, Nedpfex Tifiex Ad Njkt - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering this very well-maintained Roque packaging line, year of manufacture 2020. This line consists of the following components: - ROQFOLD 1.3 - RFD-1101 (year 2020): Generation 1.3 folding and packaging unit by ROQ - ROQPACK 27X45 - RPK-1062 (year 2020): packaging machine by ROQ - ROQLABEL P&A - RTQ-1038 (year 2020): label printer - ROQBAG 22X40 - RBG-1044 (year 2020): packaging machine for pre-made film bags by ROQ - 2 x outfeed conveyor belts Nkjdpfsx Uqn Isx Ad Not - Labelling software and dongles - Complete operating manuals in German and English If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Line consisting of: No. 1 crimping machine brand Siat, model SM481, usable width cm. 90, usable height cm. 35 no. 1 Conveyor belt useful width cm. 90, useful length cm. 160 Nedjx S Nk Aopfx Ad Nskt nr.1 Rejector Strapac, model SS-80, usable width 80 cm, usable height 50 cm or No. 1 Strapping machine brand Strapex, model Ecopack DE94, usable width cm. 120, usable height cm. 40 no. 1 Conveyor belt useful width cm. 90, useful length cm. 160 no. 1 Automatic stacking machine, usable width cm. 90, usable length cm. 150 Total footprint of the line 750 cm x 150 cm Line codes: 920568 – 920567 -920565 – 920564 – 921003

Condition: used, machine/vehicle number: 005989, Position 1: Spiral Wrappers KUPER-KFE-TANDEM 3 1600 Position 2: Shrink-Wrap Ovens KUPER-KFE-TANDEM 3 1600 Nkjdpfjwucl Sex Ad Nst

Year of construction: 2011, condition: good (used), functionality: fully functional, Automatic bread slicing and packaging line. Fully operational, after service inspection. Used very little – mostly as a backup unit. Maximum capacity approx. 2,400 pcs/h. Nkjdpfxsx A E E Uo Ad Not

Condition: used, COMPLETE ILKWANG SANDWICH PANEL LINE TECHNICAL DATA Line capacity: 400 m2/h Panel length: 2.000 mm - 15.500 mm Panel thickness: 50-75-100-125 mm SCOPE OF SUPPLY Nkodpfx Asw Aht Rjd Nst Top roll forming line - Coil loading table & Single expandable mandrel Uncoiler - 12-step roll forming line - 12m strip support & guiding unit - Steel structure frame for supporting all above equipment Bottom roll forming line - Coil car - Single expandable mandrel uncoiler - Protecting film application - 22-step roll forming line Pre-heating electric furnace Foaming unit type PUR - PIR 20m double belt conveyor Automatic spacer feeding system Flying saw: bandsawing unit with dust exhaust system Cooling / Exit roll conveyor Rotating cooling system Automatic panel stacking system Orbital wrapping line Complete hydraulics, pneumatics & electric system Existing tanks for chemical Documentation Existing tooling and spares Line capacity: 400 m2/h Panel thickness: 50-75-100-125 mm Panel length: 2.000 - 15.500 mm

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk Nkodpfxjvtpcis Ad Njt 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.) Nedjgp Diaepfx Ad Njkt

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps Nodpfx Aowcn Hdod Nskt D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H)

Year of construction: 2016, condition: good (used), For sale: Available from December 15. Complete Niverplast packaging line Year of manufacture: 2016 1. Manual feeder Niverplast 2. Depanner for baguettes by AUXPAMA 3. Metal detector 4. Rejector 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet wrapping machine 11. Niverplast conveyor belts Nedpfx Adsx Ari Hj Njkt If you have any questions or remarks, please do not hesitate to contact us. On-site inspection is possible. Kind regards, Leo Holland

Condition: refurbished (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, warranty duration: 6 months, input voltage: 380 V, GHD Hartmann Automatic Bread Slicing & Packaging Line – GBK-220 & Selectra SL-50 (2005) For sale is a complete automatic bread slicing and packaging line manufactured by GHD Hartmann, consisting of the GBK-220 packaging machine and the Selectra SL-50 bread slicer. Key Features and Specifications: Nodsx A D Axspfx Ad Nokt Production Capacity: Up to 2,400–2,700 loaves per hour (40–45 per minute), depending on loaf size. Slicer – Selectra SL-50: Slicing thickness: 11.00 mm. Features a lower drum oiling system, enabling slicing of bread with up to 40% rye content. Packaging Machine – GBK-220: Includes an extended infeed conveyor for packaging whole unsliced loaves. Capable of packaging sliced half loaves using an integrated turning device, maintaining loaf orientation. Features a clip-closing system with an integrated HPD date printer (9-digit format: XXXXX). Construction & Configuration: Stainless steel panels for hygienic and durable performance. Right hand design

Condition: used, functionality: fully functional, Year of construction: 2018, Sandwich panel line, roof 30, 50, 80, 100 mm, wall 50, 80 mm, facade 50, 100 mm Njdpfexcinajx Ad Nokt

Condition: good (used), Year of construction: 1996, Offer 25468 Sheet – Profiling Line for Shelf Panels Technical Data: - Shelf panel width approx. 250 mm - Material thickness 1.25 mm - Profiling unit with 16 roll forming stations - Hydraulic punching unit - Straightening unit, make DREHER - Motorized decoiler CAMU, load capacity approx. 1.5 t - Control panel Nksdpfx Asxxvq Tjd Net - Space requirement / footprint: 14 x 1.5 m - Weight approx. 10 t

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) Nodpoxn Rt Ujfx Ad Njkt • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: AC, Vertical Packaging Line CAMPAGNOLO C95E-1 + CW14-2.5L (Snacks, Nuts, Cereals, Extruded Products) Complete vertical form-fill-seal packaging line designed for dosing and packing snacks, cereals, or extruded products. The system combines a multihead weigher, vertical bagging machine, and advanced marking and promotional accessories, ensuring high flexibility for different bag types and formats. COMPONENTS Vertical Packaging Machine – Model C95E-1 • For pillow bags and square-bottom bags • Compatible with mono-seal and bi-seal heat-sealable films • Output: up to 60 bags/min (square-bottom) or 80 bags/min (pillow) • Bag width: 50 – 245 mm  Length: up to 390 mm • PLC control with 7-inch color touchscreen (50 recipe memory slots) • Horizontal sealing driven by brushless motor; vertical sealing pneumatic • Encoder for variable bag length adjustment • Automatic film-splicing device and end-of-film alarm • CE-compliant safety protections (EU Machinery Directive 2006/42/EC) • Power consumption: approx. 3 kW  Air consumption: 300 L/min at 7 bar Included accessories • Round forming tube + additional forming set (round and rectangular terminals) • Square-bottom and gusset forming group • Euroslot hole punch unit • Photocell for centered print registration • Stainless-steel product contact parts (AISI 304) • Bag discharge chute and 350 × 2000 mm evacuation conveyor • Stainless-steel rotating table, Ø 1200 mm Multihead Weigher – Model CW14-2.5L • 14 weighing heads with 2.5-liter detachable buckets • Stepper-motor operation for precision and quiet running • Accuracy: ± 0.2 – 1.5 g (depending on product) • Speed: up to 75 weighings/min for 40 g packs • 10-inch color touchscreen with 99 recipe capacity • Full stainless-steel frame (AISI 304), IP65 protection rating • Auto-diagnostics and self-test functions • Power requirement: 1.1 kW, 220 V, 3-phase, 50 Hz Included accessories • Synchronization bucket with stepper motors • Buffer feeding belt • Support frame with ladder and safety rails Nkjdpfoqbryxex Ad Not • Product elevator (400 × 5500 mm) • Vibrating feeding hopper (170 L) Additional Integrated Options • Ribbon Printing and Marking • Programmable thermal-transfer ribbon coder, print area 32 × 50 mm, 300 dpi resolution, supplied with software for layout and logo management. • Promotional Ribbon Insertion Unit (Extra-Ribbon Group) • Automatic device for attaching promotional ribbons during bag formation. • Chapelet Group (Chain-of-Bags Formation), for forming continuous strips (chains) of connected bags. • Nitrogen Injection System for modified-atmosphere (MAP) packaging to extend shelf life of products.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test. Nksdpfow Anc Eex Ad Nst

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Nksdpovw Eh Njfx Ad Nst Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Nodpfx Asg D Uuqjd Njkt Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,808 mm, total width: 4,850 mm, warranty duration: 12 months, total length: 14,875 mm, Artemis Upholstered Furniture Packaging Line Efficiency Meets Protection – The Modern Solution for the Furniture Industry Whether sofa, armchair, or entire living room sets: The "Artemis" sofa packaging line brings speed, precision, and security to your packaging processes. Say goodbye to time-consuming manual packaging and unnecessary material consumption – with Artemis, you secure your furniture swiftly, economically, and reliably for transport and storage. Technical Description The Artemis sofa packaging line has been specifically developed for the requirements of modern upholstered furniture manufacturers. It enables fast, material-saving, and secure packaging of sofas, armchairs, and other bulky furniture items. Automatic Packaging Process: Combination of stretch film and protective material application for optimal transport protection Flexible Application: Suitable for various sofa and armchair dimensions, rapid changeover without long downtimes Robust Construction: Industry-grade steel frame, durable drive technology, designed for multi-shift operation User-Friendly Control: Intuitive touch panel with recipe management, easy operation, and minimal training requirements Energy and Material Efficiency: Optimized film dispensing reduces consumption and lowers ongoing costs Safety Standards: CE-compliant, equipped with modern safety systems and emergency stop features Key Advantages Cost Savings: Significantly lower material consumption compared to manual packaging Nsdpfew Rybujx Ad Nekt Process Optimization: Automated processes reduce staffing requirements and throughput times High Product Quality: Consistent, tight, and secure packaging reliably protects furniture from dust, moisture, and transport damage Scalability: Designed for growing production volumes—from medium-sized to large-scale furniture manufacturers Sustainability: Resource-efficient packaging system with reduced film thickness and optional recyclable materials Typical Areas of Application Furniture manufacturers Logistics centers for upholstered furniture Packaging service providers for bulky goods Mattress manufacturers

Condition: used, Board packaging line Roller conveyor Cross chain conveyor Board hill Packer Pack elevator Nksdpfxexlgf Ij Ad Not Designed for boards up to 6 m long

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A complete carton packaging and palletising line with comprehensive accessories is being auctioned here! This is a demo machine that was only in operation for a few days! COMPONENTS OF THE PACKAGING LINE Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 Labelling systems Peripheral components Pallet station Room triangle Lantech carton erector Conveyor technology by Interroll Safety equipment Protective enclosure Safety door Safety tunnel Light curtain Centralised control system COMPONENTS OF THE PALLETISING LINE Palletising robot KUKA KR 120 R3200 PA Gripper Base Palletising software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf table printer Peripheral components Lantech carton sealer Lantech turntable stretch wrapper Conveyor technology Pallet dispenser BILA Pallet conveyor system by Interroll Carton conveyor system by Interroll Carton conveyor system NiO Interroll Nksdexhf Awepfx Ad Njt Safety equipment Protective enclosure Safety doors Programmable safety PLC Airlock at the pallet exit Protection tunnel Centralised control system Further details on the individual components can be found in the attached inventory list. The machine can be provided ready for free loading. Dismantling and loading costs amount to €48,000.

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Nkjdpfxsukd Dro Ad Nst Packaging machine: Type: Elematic 3000 LS/335

Year of construction: 2025, condition: new, Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm; suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films; suitable for dry nonwovens (airlaid, spunlaid); folds: max. 10 folds vertically and 4 folds horizontally; size of tissue, unfolded:L(40-220)xW(30-240)mm; Grammage wet wipe: 30-80g/m²; max. roll diameter: nonwoven: 1000mm, film: 350mm; filling range liquid: 0- 10ml; accuracy: +/- 0,5ml; max. speed of the machine in neutral: 110 single bags/minute (55 double bags); 5kW, 220V/380V; machine dimensions: L1000xW1500xH2000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nksdpfxjv Nmaqe Ad Nst