Used This Plate Saw for sale (17,120)

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm Kdjdpeygm Tijfx Aa Eop machine weight ab. ca. 600 kg kg

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Kedpfozlbp Ijx Aa Ejdp - Cutting length: 4,300 mm - Cutting height: 2,150 mm (vertical), 2,100 mm (horizontal) - Cutting depth: max. 60 mm - Saw blade diameter: 250 mm

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Condition: fully overhauled and reconditioned Kjdpezk N Enofx Aa Ejdp Features and technical specifications: - Cutting range 4,200 x 2,100 x 50 mm - CE mark - Full rear panelling - Scoring unit - Complete with extraction hood and saw blade - Control unit on the saw carriage - reinforced 4 kW motor - with strip-cutting device - Folding stops and aluminium centre support - retractable slatted bed for horizontal cuts Dimensions: approx. 5250 x 2700 x 1350 mm Weight: approx. 750 kg Availability: at short notice Location: Hesse

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm Kdjdszk N Hxspfx Aa Esp - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1991, Second-hand machine Year of manufacture: 1991 Fully automatic floor-standing machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Ksdpezk Nx Isfx Aa Esdp Saw blade diameter 300 mm, Control system for vertical and horizontal cuts, with aluminium folding stops and aluminium centre support, with SUPER-CUT scoring device Motor 3 kW – 400 V Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Specifications and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof-tooth Saw blade speed: 5,000 rpm Kdjdpfjzk Nwqox Aa Eep Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: – horizontal cuts: via scale and strip-cutting stop - vertical cuts: via scale from 0–1,300 mm Extraction connection: 100 mm 5 material support rollers, per metre of cutting length 1 feed roller and 1 discharge roller Pneumatic workpiece clamping device between the support rollers 1 centre support element, per metre of cutting length Torsion-free, free-standing machine frame pneumatically retractable slatted frame Round bar guide, vertical and horizontal Finely adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip-cutting stop Manual programming rail with 5 groove blocks Pneumatic lowering of the saw unit Pneumatic saw head locking mechanism Control panel on the saw unit: start button, stop button Control panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swivelling saw head Location: Flörsheim Availability: at short notice

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Condition: well-maintained Features and technical specifications: Cutting length 4,300 mm Kdsdpfx Ajzk Nm Eea Eop Cutting height 2,200 mm Cutting depth 45 mm Motor: 3 kW Saw blade diameter 220 mm with SuperCut scoring device with automatic sliding grate Complete with length stop Includes strip stop Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Kdsdpfx Aajvz Euko Ejp Weight 800 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Weight 665 kg Total power requirement 3 kw Kdsdpjvz Eihofx Aa Ejp

Condition: new, Year of construction: 2026, Cutting length 4200 mm Kdjdsyk Ibvepfx Aa Eep Cutting height 2200 mm Motor output 3 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Ksdpfx Asvz Eudea Eodp Weight 665 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Kodpfjvz E D Esx Aa Ejdp Weight 850 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Kdedevz Eg Hopfx Aa Esp Weight 900 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Ksdpfxswiipms Aa Esdp Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Kdedpoyymhuefx Aa Esp Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Kjdpfxjxlcaus Aa Eodp Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: new, Technical description:Cutting height: vertical: 0 - 2,150 mm, horizontal: 80 - 2,050 mmCutting length: 5,300 mmCutting depth: 80 mm (with clamps: 55 mm)Saw blade: diameter 303 mm, bore 30 mm, Z = 60 hollow roof toothRotation of the saw blade: 5,000 or: 4 kW (S 6)Required air pressure: 6 barMeasurement readout for horizontal saw cuts:- using a scale from 0 - 2,070 mm- using a strip cutting stop from 75 - 500 mmMeasurement readout for vertical saw cuts:- on a scale from 0 - 1,300 mmExtraction nozzle: 1 x 100 mm 1 x 120 mmEquipment features:- ADVANCE clamping system, consisting of: 2 pneumatic clamping pliers,the motorized on vertical axes on a recirculating ball screw from abovemove down. The tongs carry plates with a weight ofmax. 150 kg- Torsion-free, free-standing machine frame- Round rod guide, vertical and horizontal- Pneumatically evasive slatted frame- Finely adjustable folding stop with stop extension- Fine adjustment for horizontal saw cuts via handwheel- Strip cutting stop- Manual programming rail with 5 slot nuts- Pneumatic immersion of the saw unit- 25 material support rollers- 1 feed roller and 1 feed roller- Pneumatic workpiece clamping device between the support rollers- 3 central support elements, pneumatically folding out- Pneumatic saw head locking- Control panel with template holder- Switch unit on the saw unit: start button, stop button- Tool cabinet- Illumination scale for vertical saw cutsOrder number: ELCO0001 / S013Scope of delivery:Equipment package I, consisting of:- Digital display for the folding stop- Digital display for the saw unit with incremental function- pneumatically swiveling saw unit- Scoring system with controlled counter air nozzle, numerical displayfor setting the scoring or groove depth and activating lightOrder number: ELCO0191 / S085 Kodpfx Aaovwf Hlj Eedp

Condition: used, Cast bed Length: 2410 mm Kdedpfx Aaezmxrio Eop Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Ksdpfxszmxq Es Aa Eodp Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Kdsdpozmxqxjfx Aa Eop Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Kjdjzmw Hxepfx Aa Esdp Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Ksdpfx Aajwxmhlj Esdp Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available Kjdpfx Aaeb A N Aks Ejdp -Weight: 2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece Kjdpfx Asb A N Alea Eodp -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Kjdpeyh Hc Rofx Aa Eodp