Used Vertical Panel Saw for sale (21,583)

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Hjdpfx Aaeu Rqq Hjhjp Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 4,200 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 60 mm, main saw diameter: 250 mm, Used vertical panel saw for sale. The machine is in daily use and can be inspected in operation. Several saw blades will be included. Hsdpfxeygv Dwe Aahep

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple settings, half or whole board cutting. You can try it, it works well. Hsdpfxjx Eyqys Aahep

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 30,902 h, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 220 mm, cutting width (max.): 5,300 mm, saw blade diameter: 305 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, total length: 6,300 mm, Types: 6220A Standard III, machine no.: 30902. Motor: 4.4 kW, Power supply: 3/400V/50Hz, 4750 rpm. Cutting capacity: 5300x2200x80 mm. Year of manufacture: 2000. Hedpfx Aoyr R S Heahsp

Condition: ready for operation (used), Cutting area 5200 x 2100 mm Cutting depth 70 mm Manual feed Automatic swing-out grate Hodpfxeyrpk Is Aahep External dimensions (L x W x H) approx. 6550 x 1500 x 3010 mm

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Hodovwfmxspfx Aahjp

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: Hsdpfxox S U I He Aahop - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: used, Year of construction: 2023, Cutting length ca. 5300 mm Cutting height ca. 2150 mm Hodpfxovwfcas Aahep

Condition: good (used), Year of construction: 1985, machine/vehicle number: 19378, functionality: fully functional, operating hours: 20,656 h, power: 4.4 kW (5.98 HP), saw blade diameter: 315 mm, cutting depth: 80 mm, feed length X-axis: 5,300 mm, feed length Y-axis: 2,200 mm, feed length Z-axis: 80 mm, Types: Standard 6220 A, Machine no.: 13981, Year of manufacture: 1985, Voltage: 3/380V/50Hz, Motor: 4.4 kW (5.5 HP), 2880 rpm. Operating hours: 20,656, 2x digital measurement V+H, cutting capacity: 5300x2200x80 mm Hsdpfx Aajx N Tztehep

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Hsdpfxevwfnps Aahep

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: TRK 3 5220A Hsdpoxwb Sgsfx Aahsp Year of manufacture: 1994 Cutting length: 430 cm Cutting height: 220 cm Cutting depth: 80 mm Power: 4.4 kW Saw blade diameter: 300 mm Speed: 4,750 rpm

Condition: used, Year of construction: 2002, machine/vehicle number: 19711, functionality: fully functional, power: 4.5 kW (6.12 HP), cutting height (max.): 2,200 mm, saw blade diameter: 294 mm, overall weight: 1,050 kg, cutting length (max.): 5,300 mm, collet bore: 30 mm, The vertical panel saw features a solid and compact structure to ensure stability during operation. This configuration allows for consistently high cutting quality, even on large or particularly challenging materials, delivering smooth and linear movements for safe and efficient work. Hodpfx Aewqmyreahjp The machine is supplied with 29 blades, each with 50% remaining service life. Transport not included.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Hodpfoyh Hc Rsx Aahop

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 0-240-14-3022, functionality: fully functional, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, cutting length (max.): 5,600 mm, stack height: 580 mm, TECHNICAL DETAILS Maximum cutting length: 5,600 mm Maximum cutting width: 5,600 mm Maximum panel dimensions with rear loading using a lifting platform: 5,600 mm x 2,240 mm Maximum stack weight on the platform: 10 tons Maximum stack height: 580 mm Saw blade projection: 125 mm Saw blade diameter: 450 mm Saw carriage feed rate during cutting: 5 to 150 m/min Saw carriage return feed rate: 150 m/min Program slider feed rate: 80 m/min Number of clamping devices: 9 Spacing of clamping devices: 75 mm / 275 mm / 475 mm / 1,075 mm / 1,775 mm / 2,475 mm / 3,275 mm / 4,075 mm / 4,875 mm MACHINE DETAILS Connected power of the main saw motor: 13.5 kW Connected power of the scoring saw: 2.2 kW Voltage: 400 V Hodpfxszhm Rio Aahjp Frequency: 50 Hz Phases: 3 Air cushion tables: 5 units, each 2,810 mm x 650 mm Control system: CAD-matic 4.0

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 208.025, functionality: fully functional, cutting width (max.): 4,200 mm, cutting length (max.): 4,200 mm, stack height: 2,000 mm, Auction of a panel dividing saw with automatic magazine! TECHNICAL DETAILS Capacity: 4,200 mm x 4,200 mm Saw blade overhang at 90°: 72 mm Saw blade overhang at 45°: 50 mm Saw carriage feed rate (forward): 0-100 m/min Saw carriage feed rate (reverse): 0-100 m/min Feed rate of program slider: 0-25 m/min Program slider return speed: 80 m/min Collet maximum opening: 84 mm Collet positions: 65/245/395/985/1,605/2,225/2,845/3,465 mm Cross-pressure range: 50 - 1,250 mm MACHINE DETAILS Main saw motor: 14 kW Scoring saw motor: 1.5 kW Electrical supply: 400 V, 50 Hz, 3-phase Hjdpfezhm E Hsx Aahjp Automatic magazine Magazine dimensions: 33.1 x 9.4 m Magazine height: 3,600 mm Stack height: 2,000 mm Input stack height: 1,900 mm Magazine speed X: 0-150 m/min Magazine speed Y: 0-150 m/min Magazine speed Z: 0-60 m/min Maximum panel weight: 300 kg Length adjustment of vacuum lifter: 2,000 - 4,200 mm Width adjustment of vacuum lifter: 1,000 x 2,100 mm Vacuum pump: 40 m³/h Rotating device: 90°

Condition: used, Year of construction: 2014, cutting depth: 123 mm, plate length: 2,200 mm, plate width: 4,500 mm, table length: 4,500 mm, table width: 2,200 mm, TECHNICAL DETAILS Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum cutting depth: 123 mm Number of grippers: 10+1 Main saw unit Maximum feed rate: 90 m/min Scoring unit Maximum feed rate: 140 m/min Lift table: 4,500 x 2,200 mm MACHINE DETAILS Programming software: OSI Hedpszf H N Hofx Aahsp Main saw blade motor power: 18.5 kW Scoring unit motor power: 2.2 kW Total installed power: 41 kW EQUIPMENT Lift table Pre-loading roller table Barcode label printer (Model: ZEBRA ZT230) Rotational station Front support table Flexible gripper for NC positioning Second flexible slider Panel rotational station The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8549

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 2,200 mm, plate width: 3,800 mm, table length: 3,800 mm, table width: 2,200 mm, TECHNICAL DETAILS Hodpfxezf H Nmj Aahjp Maximum plate width: 3,800 mm Maximum plate length: 2,200 mm Main saw cutting depth: 123 mm Number of grippers: 7 Maximum feed rate: 140 m/min MACHINE DETAILS Main saw motor power: 18.5 kW Scoring unit motor power: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding stop The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Hjdpoyku U Nsfx Aahop machine weight ab. 500 kg

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES Hodpfx Aaozhvbdehjp – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: used, Year of construction: 1992, max. cutting width: 5300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, lower support: fixed rollers, material support: adjustable plastic slats, measuring system: scale, saw head tilt: manual, saw feed: manual, mounting: free-standing, extraction: external extraction system, saw beam locking: manual, weight approx.: 1500 kg, dimensions: 6300 x 1300 x 2900 mm, motor power: 5.5 kW. Storage location: Nattheim Hedpfxjy H E Utj Aahop

Condition: used, Year of construction: 1998, operating hours: 14,917 h, Colour: White Weight: 6.100 kg - Details: - └ Description: transport speed saw aggregate forward 5-50 m/min reverse 70m/min speed material slide forward 30 m/min reverse 60 m/min - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 535198 - Operating hours: 14917 - Main motor power [kW]: 18.0 - Control: ipc 5000 - Software: ipc 5000 - Saw blade bore diameter [mm]: 30 - Max. saw blade diameter [mm]: 450 - Max. cutting length [mm]: 4200 - Max. cutting width [mm]: 4200 - Max. cutting height [mm]: 120 - Number of feed clamps [pcs]: 9 - Options: Voorritser - Feed speed: Automatic - Spindle speed: - └ Max. spindle speed [rpm]: 2870 - Scoring unit: Hsdpfx Aajzhth Uohsp - └ Scorer bore diameter [mm]: 30 - └ Scorer blade diameter [mm]: 150 - Voltage [V]: 400 - Installed length [mm]: 6550 - Installed width [mm]: 5300 - Installed height [mm]: 1860 - Transport weight [kg]: 6100kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, operating hours: 40,723 h, Colour: White Weight: 6.100 kg Price: On request - Details: - └ Description: material slide speed forward 30 m/min reverse 60 m/min transport speed saw aggregate forward 5-50 m/min reverse 70 m/min - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 5569 - Operating hours: 40723 - Main motor power [kW]: 18.0 - Control: Mayer 5400 - Software: ipc 5000 - Saw blade bore diameter [mm]: 30 - Max. saw blade diameter [mm]: 450 - Max. cutting length [mm]: 4200 - Max. cutting width [mm]: 4200 - Max. cutting height [mm]: 120 - Number of feed clamps [pcs]: 9 - Options: Voorritser - Feed speed: Automatic - Spindle speed: - └ Max. spindle speed [rpm]: 2870 - Scoring unit: - └ Scorer bore diameter [mm]: 30 - └ Scorer blade diameter [mm]: 150 - └ Max. cutting height with scorer: 120 - Voltage [V]: 380 - Current consumption [A]: 58 - Fuse [A]: 63 - Power [kW]: 29.0 - Installed length [mm]: 5300 - Installed width [mm]: 6550 - Installed height [mm]: 2200 - Transport weight [kg]: 6100kg Financial information Hedpozhtb Uofx Aahop VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Hodpfx Aaow Nv I Ushop Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Hsdpfx Ajw Nx A Ioahop Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: excellent (used), Panel Saw HOLZKRAFT SI400es - used - Scoring unit, tilt-able, parallel fence with fine adjustment, outrigger table, speed display, angle/miter fence, overhead guard (narrow and wide), automatic brake, dust-tested ----- Technical Data ----- Tilting range: 0-45°, carriage length: 3,200 mm, cutting width: 1,270 mm, cutting height: 130 mm, max. saw blade diameter: 400 mm, scoring saw blade diameter: 120 mm, crosscut fence extendable up to: 3,200 mm, miter fence tilting range: 0-45°, speeds: 3,500/5,000 rpm, motor power: 7 kW, scoring motor power: 0.55 kW, table height: 900 mm, extraction port diameter: 120/80 mm, dimensions (LxWxH): 3,650 x 2,000 x 1,600 mm, weight: 630 kg Quality Information: - Sliding table checked / readjusted - Clearance cuts checked / readjusted - Set to manufacturer's specifications - Brake checked - Complete basic inspection - Complete basic cleaning - Electrics checked - Ready for immediate use Hedpfx Aajy Dhukohep