Used Vertical Panel Saw for sale (22,740)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Iedexn Rt Uopfx Adnoa Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: excellent (used), IM Very good condition. Isdpfx Adew An Ubsnoa

Condition: used, Year of construction: 1985, machine/vehicle number: 85-9-196, This Altendorf F-90 sliding table saw is being auctioned in our industrial auction / machinery auction as part of the insolvency auction of Wietec Fenster GmbH – machining equipment, workshop furnishings, trailers – online. Ijdpfx Asxu Tubjdnsa

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Equipment and technical specifications: Iodpoxuxg Nofx Adnoa - Cutting length: 2800 mm - Cutting width: 1250 mm - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPP 350/43/43/X Machine type: Beamsaw Year of manufacture: 2008 Operating status: still connected Cutting length 4.300 mm Width of lifting table 2.200 mm Number of grippers 8 Feedrate max 150 m/min Saw blade projection 80 mm Saw blade diameter max 350 mm Scoring saw Yes Labelling manually Lift table loading from behind Stop side Right side HOLZMA | HOMAG Machine table with air nozzles throughout Iodpfx Asxwwfvsdnja Control HOLZMA CADMATIC 4.1 Declaration of CE-conformity Conformity marking CE mark Space requirement Length 8,2 m Space requirement Width 6,5 m

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Iodpfx Ajxulb Tednsa Optionally available with a new Felder RL 200 extraction system from 2024. This PUTSCH SVP 950M panel saw was manufactured in 2011. It features a maximum cut length of 5300 mm, vertical cut up to 5200 mm, and a cut height of 2200 mm. The saw operates with a motor power of 7.5 hp and a blade diameter of 300 mm, rotating at 5000 rpm. Consider the opportunity to buy this PUTSCH SVP 950M panel saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: used, Year of construction: 2012, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, main saw diameter: 315 mm, trimming length: 3,200 mm, type of input current: three-phase, input voltage: 400 V, - Year of manufacture: 2012 TECHNICAL SPECIFICATIONS: - Max. saw blade diameter: 315 mm - Cutting length: 3200 mm - Max. cutting height: up to 100 mm - Angle cutting: 0-45 degrees - Saw blade speed: 4000 rpm Ijdpfxjxdyvds Adnsa - Main motor power: 5 kW - Scoring unit motor power: 0.9 kW - Max. parallel cut: 1270 mm - Weight: 800 kg

Condition: excellent (used), 3 kW motor Working height 215 cm Working length 310 cm Isdpfx Aetrfarednea

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 00103, feed length X-axis: 4,800 mm, feed length Y-axis: 4,800 mm, feed length Z-axis: 100 mm, cutting length (max.): 100 mm, cutting height with scoring (max.): 90 mm, saw blade diameter: 400 mm, cutting height (max.): 110 mm, total length: 7,500 mm, total height: 1,700 mm, total width: 6,600 mm, overall weight: 7,700 kg, input voltage: 380 V, compressed air connection: 7 bar, Panel saw with a cutting length of 4500 mm, equipped with a rear table for panel loading. The machine is operational and will be disassembled due to installation of a new machine. Ijdpfxexwqlpe Adnja

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Version : with large sliding table and cutting line laser, Sold with / without suction unit. This would be suitable for sawing graphite . Special superstructures : Sliding table is designed for workpieces weighing up to 150 kg and with dimensions dimensions of W x D x H of 1500 x 600 x 450 mm High-quality, powerful extraction system from RUMAC, type DS 64000 M, 2.2 kW, protection class IP65 ; Ijdpfxexwqc Io Adnsa . Technical data of the saw : Saw band 4550 x 20 x 0,8 mm ( actual : WIKUS , type TCT ) Roller guide 8 - 25 mm Cutting height max. 400 mm under the guide throat 630 mm Cutting speed approx. 250 - 2000 m/min , infinitely variable Drive power saw motor 4.0 kW Space requirement, W x D x H approx. 2 x 1.2 x 2.4 m plus extraction system Weight approx. 1.25 tons plus extraction system .

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg Ijdjwiipmjpfx Adnja

Condition: used, Year of construction: 1999, functionality: fully functional, saw blade diameter: 350 mm, working length: 3,200 mm, working width: 3,200 mm, saw blade speed: 4,600 rpm, saw drive: 7,500 W, working height: 60 mm, Equipment: documentation/manual, Homag Optimat CH04/32/32 Panel Saw – Fully Equipped Still in use to date, 1 to 2 days per week, but offered for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Saw motor (7.5 kW) – Scoring saw (1.1 kW) Main saw RPM: 4600 rpm – scoring saw 5100 rpm ✅ Ease of use Air blower unit for easy positioning of panels to be cut Isdpfjw S Tqlsx Adnoa Immediately available, fully equipped 📍 The machine is located in Slovakia and must be dismantled and collected on site by the buyer.

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: Iedpfx Aoxdxv Nsdnja - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: TRK 3 5220A Year of manufacture: 1994 Cutting length: 430 cm Cutting height: 220 cm Isdpfx Aexwb Sgodnja Cutting depth: 80 mm Power: 4.4 kW Saw blade diameter: 300 mm Speed: 4,750 rpm

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, Built-in features: * Saw blade projection 80 mm * Cutting length 3200 mm * Right-hand machine * Machine table in the cutting line with air cushion * Stepless pressure beam control * 6 clamps * Main saw motor power: 11 kW * Scoring saw motor power: 2.2 kW * Labelling package * Postforming * Saw carriage speed: 130 m/min Machine operation * Operating panel * CADMATIC 5 * Additional information * CAD link conversion program * Data transfer online + USB Iedpfxoxv Srus Adnsa Documentation: * Selected languages: English, German, Croatian * Documentation on data carrier, printed documentation General information: * Machine length 3200 mm * Control: POWERCONTROL with POWERTOUCH system * CE mark * Commissioning date: November / December 2025

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm - CE mark - Rear full enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Isdpfx Aowt E Uyjdnsa Weight: approx. 750 kg Availability: short notice Location: Hesse

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Weight 800 kg Total power requirement 3 kw Isdpfx Adovz Eukjnja

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Isdpfx Adsxvz T Ijnsa Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Panel saw Holzma HPP 22 Year of manufacture: 1997 Technical condition: good, machine fully operational Technical data: - Maximum panel size: 4200 x 200 mm - Saw blade projection: 140 mm Iodpfxsxvybqs Adnja - Cutting length: 4300 mm - Installed power: 26 kW

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm, max. cutting height: 2200 mm, saw blade diameter: 250 mm, max. machining thickness: 60 mm, saw blade bore: 30 mm, lower support: plastic rests, material support: retractable plastic rails, measuring system: scale, saw head tilting: manual, saw feed: manual, mounting: freestanding, extraction: external, saw beam locking: manual, weight approx.: 1000 kg, dimensions: 5600 x 1700 x 3000 mm, motor power: 4.2 kW Iedpfx Aexg Igisdnja Storage location: supplier

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Iodpfxov N D E Ro Adnea Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Year of construction: 2006, condition: ready for operation (used), This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine. Iedjxtq T Espfx Adnoa Application Types Sawing (Wood)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Ijdpsvz Eudsfx Adnoa Weight 665 kg Total power requirement 3 kw

Condition: good (used), Year of construction: 1993, Panel Saw Manufacturer: Striebig Model: Standard II Plus 6220 A Year of manufacture: 1993 Cutting length: 5,300 mm Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting depth: 80 mm Isdpfxsw N Saas Adnsa Saw blade diameter: 300 mm Speed: 4,750 rpm Power: 4 kW Dimensions: 6,470 x 1,281 x 2,885 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Iodpfx Adevz Eg Honsa Total power requirement 3 kw