Used Vertical Machining Center for sale (69,592)

Condition: good (used), Year of construction: 1996, Control: OSP 700M Nwedjx Tvgaepfx Ah Heb Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm Nodpfoxddrpjx Ah Hjwb T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW transport dimension 2,25 x 2,4 x H = 2,5 mm weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Nwjdpfxjx Tti Sj Ah Hob Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z SK 40 spindle taper Nwsdpfxow Ei E Hj Ah Hsb 20 bar internal coolant supply 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

Condition: used, Year of construction: 2017, operating hours: 1,400 h, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (max.): 14,000 rpm, CNC Heidenhain 640 WORKING AREA: X-axis: mm 1.450 Nsdpfjya Imqjx Ah Hewb Y-axis: mm 700 Z-axis: mm 550 Rapid traverse (X/Y/Z): m/min 42 Max. spindle speed: Rpm 14.000 Tool holder: SK 40 Tool magazine capacity: 30 Table size: mm 1.760 × 750 Max. table load: kg 2.000 Equipped with: • HEIDENHAIN 640 CNC • DXF file reader • Preparation for the fourth axis • Tool setter • Heidenhain workpiece measuring probe • 40 bar through-spindle high-pressure coolant system with paper filtration tank, 600-liter capacity • Air conditioning unit • 30 position tool magazine • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPABILITIES Table work surface (length): 2,500 mm Table work surface (width): 820 mm Longitudinal (crosswise) X-axis travel: 2,000 mm Column (crosswise) Y-axis travel: 800 mm Spindle head (vertical movement) Z-axis: 720 mm Minimum distance from spindle nose to top of table: 140 mm Maximum distance from spindle nose to top of table: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ± 110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous rating): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between T-slot centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access type Tool shank: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder & taper pin): 8 kgf Max. total tool magazine weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Compressed air pressure: 0.5–0.9 MPa Compressed air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of adjusting tools Work area lighting Power transformer for European market USB I/F (1 port) MANUALS, DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE FRAME COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Global safety measures Work area door interlock with locking switch Full machine enclosure Full-cover chip and coolant protection TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/HIGH PRESSURE COOLANT Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic ON/OFF + warm-up MEASURING SYSTEMS Automatic tool length measurement & tool breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL UNIT – 15 Functions 19" color LCD (touch screen) 3-D coordinate conversion Position sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path check LAN connection High smoothing control Nodpfoya Hngox Ah Hewb Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak thread tapping / pre-tapping Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm Nwjdpfx Ajya E Hnoh Heb y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: excellent (used), Year of construction: 2017, MAZAK vertical machining center in excellent condition. Built in 2016, first use in april 2017. Only used for occasional and simple machining tasks > only 2500 spindle hours (!) Including: Nwedpfx Ahsya Etus Heb High pressure cooling through spindle (15 bar) Dividing wall (removable) Mayfran chip conveyor on left side Synchronous tapping Viewing of the machine in running condition is possible upon appointment. Availability: end of February 2026 Cnc control Mazatrol Matrix Nexus 2 Number of Axes 3 X-axis Travel 1740 mm Y-axis Travel 530 mm Z-axis Travel 510 mm Spindle Speed 12000 RPM Tool taper CAT Number of tool positions 30 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm Nwodpfeya Er Rex Ah Hob table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: good (used), Year of construction: 2012, • Spindle: 30,000 rpm • Taper: BT30 • Control: Hurco WinMax • Working hours: 13'000 Condition / equipment: Njdpfx Ajya D Sish Hjwb • 5-axis simultaneous positioning • Tool changer: 20 tools • Spindle chiller • Tool measurement • Tooling negotiable • Compressed air gun

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Nodpfoya Dw Sex Ah Hjwb Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 410 mm Z-axis travel: 460–510 mm Table size (L × W): 700 × 410 mm Maximum table load: approx. 400 kg per pallet T-slots: 18 × 4 mm Pallet changer: Automatic pallet changer (APC) Changeover time: ~4 seconds Pallet clamping: 3-point clamping system (patented) Spindle taper: BT-40 / ISO40 Maximum spindle speed: 8,000 rpm Spindle motor: approx. 9 kW Tool magazine (ATC): 24 positions Tool capacity: 24 Maximum tool diameter: approx. 80–125 mm Maximum tool length: up to ~250 mm Maximum tool weight: approx. 7 kg per tool Tool change time: Rapid change arm Rapid traverse speed (X/Y/Z): up to approx. 30 m/min Feed rate: up to approx. 10,000 mm/min Axes: 3 axes (X / Y / Z) Nwjdeya Dlcepfx Ah Hjb MACHINE DETAILS Dimensions & Weight Machine dimensions (L × W × H): approx. 2,360 × 4,365 × 2,878 mm Machine weight: approx. 7,500 kg EQUIPMENT Automatic pallet changer (APC) 3-point clamping system for pallet fixing FANUC CNC control (e.g. 0iMB) LCD color display Automatic lubrication pump Coolant system incl. wash hose Chip conveyor Work light Electronic handwheel (MPG)

Condition: defective spare-parts repository (used), Year of construction: 2001, functionality: not functional, overall weight: 2,300 kg, We offer this defective Hyundai SPT-V30T vertical machining center, year of construction 2001. Fault 310: SERVO OFF Without this fault everything works. Model: SPT-V30T Nwodpfoyay Hpsx Ah Hsb Serial number: 70TY5064 Weight: 2300 kg Weight: 5071.5 lbs Pick up in Kaunas, Lithuania If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2012, Available immediately from Swiss toolmaking facility (CH): Vertical 5-Axis Simultaneous Machining Center Unitech Model: HSM – IC 5-Axis Year of manufacture: 2012 Heidenhain iTNC 530 Nwodpsyayk Uefx Ah Hjb Table size: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds up to 15,000 rpm Feed rates up to 30,000 mm/min Table load capacity: 500 kg Tool holder: BT 40 Magazine: 40 stations Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through the spindle Spindle hours: 8,200 / spindle will undergo a complete overhaul in 2025, after which it will be reset to 0 hours Glass scales on X and Y axis Zero-point measuring system in rotary table Infrared measuring system Zero-point clamping system integrated in rotary table with 10 clamping pots, manufacturer: Schunk Weight: 10 tons Price: EUR 17,500.— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Nedpfxeyaykue Ah Howb

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load capacity: 2 t Travel (X/Y/Z): 1530 / 660/ 650 mm Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Nwodpfxeyaykbe Ah Hjb Taper: SK 50 Spindle speeds up to 6,000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Through-spindle coolant (IKZ) Feeds: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1,260 mm/min Total connected load: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 6,000.00 plus VAT, ex site

Condition: good (used), Year of construction: 2016, operating hours: 27,412 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840D sl, table width: 400 mm, table height: 30 mm, table length: 500 mm, table load: 500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,956 h, coolant supply: 80 bar, spindle motor power: 32,400 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a Starrag HEC 400 F 4-axis machining center, which was fully inspected and overhauled at the Starrag factory in 2022. All relevant components were checked and replaced or adjusted as needed during this process. Since its installation in 2022, the machine has been in operation at our facility and is currently under power for ongoing production. It is in well-maintained technical condition and has been serviced regularly. Technical Highlights • Starrag HEC 400 F – 17211, 4-axis machining center for milling / drilling / turning • Control: Siemens Sinumerik 840 D solution Line with NCU710 and PLC integration • Spindle: HSK-A63 motor spindle, speed range 50 – 18,000 rpm, torque 130 Nm (25% duty cycle), power 32.4 kW / 24 kW (100% duty cycle) • Factory inspection in Chemnitz (2022): all assemblies checked, adjusted, and renewed as needed • Direct-drive NC rotary table, 80 rpm, 400 Nm drive torque, 3,000 Nm tangential torque • Siemens spindle diagnostics & remote diagnostics (TeamViewer) • Energy-efficient system with regeneration and standby mode for energy savings Working Area & Dimensions • Travels (X/Y/Z): 650 / 650 / 680 mm • Pallet size: 400 × 500 mm with 57 × M12 threaded holes • Max. workpiece height: 850 mm • Max. load per pallet: 500 kg • Pallet changer: 2 pallets – automatic, changeover time approx. 8 s • Tool magazine: 60 tool positions (chain magazine), chip-to-chip time 3 – 4 s • Chip conveyor: scraper belt conveyor with vacuum gap sieve, discharge height 1,050 mm • Machine dimensions (L × W × H): approx. 5,150 × 2,800 × 3,025 mm • Machine weight: approx. 11,500 kg • Noise emission: ≤ 80 dB(A) according to EN ISO 3744 Additional Equipment Nedpfjx H Idkex Ah Hjwb • 6-channel clamping hydraulics (90 bar) at setup and working positions • Increased spindle torque (130 Nm) for high-performance cutting • Torque support with axial supports • Coolant system: connection to central supply incl. return and temperature compensation • Increased coolant pressure to 80 bar through spindle center • Optical measuring probe Renishaw OMP60 incl. Siemens measuring cycles • Tool breakage detection (mechanical, parallel to main time) • Pallet sequence operation + crane loading/unloading (software) • Signal lamp (4-color) for operating status • Work area/machine equipment: shower nozzle, rinsing pistol, vortex nozzle, extraction interface, foot switch blow nozzle • Documentation: fully digital (PDF) Operating Hours / Run Times • Power-on hours: approx. 27,412 h (as of Oct 2025). The counter runs as soon as the machine is switched on – including during setup, maintenance, or idle times. • Total spindle running time: 9,956 h Special Features • OPTIONAL: With perfect post-processor and CAD/CAM software TOP Solid (at extra cost) • Under power – demonstration possible at any time • Directly from production – not a dealer sale • Complete technical documentation available • Support with dismantling, loading and transport available (at extra cost) The tool holders and vise visible in the photos are not included in the offer, but can be purchased separately if desired. Price: €135,000 net, negotiable for quick completion. All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: used, Year of construction: 2005, 1 unit 3-axis machining center, make Bridgeport model VMC 760 XP³, year 2005, serial number 310B107, machine weight 6,780 kg, control Heidenhain iTNC 530, recorded operating hours 13,983, control on time 14,538 h, program run time 5,923 h, milling table approx. 1,000x600 mm, 5 T-slots, XYZ travels approx. 760x610x610 mm, chip conveyor, 30-position tool changer, internal no. 10 Njdoyaw Nhspfx Ah Hjwb

Condition: used, Year of construction: 2012, 1 unit universal milling machine, manufacturer Kunzmann, model B 1000 - 810 Z Vario, year 2012, serial no. 101166, machine weight 10,100 kg, XYZ travel – 1,020 x 620 x 810 mm, control unit Heidenhain iTNC 530, recorded operating hours 26,337, program run time 22 h, spindle run time 21 h, Heidenhain HR 410 electronic handwheel, TS 640 probe, Renishaw laser control system, milling table approx. 1,200 x 600 mm, 6 T-slots, 32-position ATC, chip conveyor by Mayfran BA 800/1000, band filter system, internal no. 11 Category: Machinery and Technical Equipment Nwedjyaw Iwepfx Ah Hob Sale subject to reservation: The sale of this item is subject to reservation and independent of the achievement of the minimum price. A decision regarding the acceptance of the bid will be made as soon as possible.

Condition: good (used), Year of construction: 2001, Data will follow.... Nsdjx Tgznspfx Ah Hjwb

Condition: excellent (used), Year of construction: 2012, DMG DMC 1035 ECO Machining Center DMG DMC 1035 ECO with Siemens Sinumerik 810 D powerline control system, year of manufacture 2011, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE-compliant!! Technical data: X-axis travel: 1,035 mm y-axis travel: 560 mm z-axis travel: 510 mm CNC control: Siemens Sinumerik 810 D powerline Table size: 1200 x 560 mm Maximum table load: 1000 kg Spindle taper: SK 40 Spindle speed: 10,000 rpm Spindle motor power: 13 kW Feed rate steplessly adjustable: 20,000 mm/min Rapid traverse: 25 m/min Tool changer capacity: 20 positions Coolant system with through-spindle coolant (IKZ): 20 bar Operating voltage: 400 V Total power requirement: 17 kVA Machine weight: approx. 4.1 t Dimensions (L x W x H): approx. 2.55 x 2.30 x 2.25 m Chip conveyor: 3.90 x 0.95 x 1.60 m Equipment: - Control unit: Siemens Sinumerik 810 D powerline - Electronic handwheel - Chip conveyor - Through-spindle coolant (IKZ) 20 bar About the machine: Offered here is a DMG DMC 1035 V machining center equipped with a Siemens Sinumerik 810 D powerline control. This machining center is in excellent original condition and was only used for training purposes in a facility. The control system is very user-friendly. The guideways are lubricated regularly via a central lubrication system. The DMG DMC 1035 V has been both mechanically and electrically tested by us. Take the opportunity to view and test the DMG DMC 1035 V under power at our facility. Nodpeyat Tvjfx Ah Hswb You will find further milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 Njdpsx Ib T Ijfx Ah Hewb - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Maintenance - Carried out regularly - Machine is fully functional All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions Nwedpfox Icyvex Ah Hjb -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 18,000 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, Machine designation: Machining Centre Manufacturer: Mazak Model: HCN 5000-II Year: 2008 Technical details: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Controller manufacturer: Mazatrol Controller model: Matrix Nexus Max. workpiece weight: 700 kg Overall height: 2,813 mm Overall length: 5,985 mm Overall width: 3,056 mm Table width: 500 mm Table length: 500 mm Total weight: 11,000 kg Max. spindle speed: 18,000 rpm Nedpfx Asyargbsh Hjwb Mazak HC Nexus 5000-II CNC horizontal machining centre Mazatrol Matrix CNC control Pallet table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-Y-Z axes travel: 730 x 730 x 740 mm Table indexing: 0.001° Spindle taper: DIN 69871A-40 Spindle speed: 18,000 rpm Spindle motor: 35-26 kW Tool magazine capacity: 80 For any questions regarding the machine or to arrange a viewing appointment, please contact us by phone or email.

Condition: used, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, Machine parameters: Nedpfoyarahjx Ah Howb Travels in X, Y, Z axes: 1270 x 660 x 610 mm Table clamping area: 1500 x 660 mm Description: The machine is in good technical condition. Testing is possible by prior arrangement. Supported systems: MAX4 with WinMax v8, control language completely in Czech. 3D simulation: Yes. Programming type: Dialog and NC. TABLE Table dimensions: 1,500 x 660 mm T-slots: 6 x 18 mm Maximum table load: 1,350 kg Distance from spindle nose to table: 150 - 760 mm TRAVELS X axis: 1,270 mm Y axis: 660 mm Z axis: 610 mm A axis: 360 SPINDLE Maximum spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Spindle taper: SK 40 TOOL MAGAZINE Number of tools: 40 Max. tool diameter: 75 / 125 mm Max. tool weight: 7 kg FEED Rapid traverse X/Y/Z: 30 / 30 / 20 m/min Working feed X/Y/Z: 15 m/min ADDITIONAL MACHINE DATA Dimensions (W x D x H): 3,250 x 2,220 x 2,950 mm Weight: 9,400 kg