Used Vertical Machining Center for sale (68,586)

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR - Year of manufacture: 2004 - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel paths: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle cooling 30 bar - Extraction system - Tool measurement Renishaw prepared - Magazine with 50 positions Purchase price in 2004: EUR 230,000.00 Defects: Fgjdpfsxlg Ucox Ad Hok - Main spindle motor failure (electrical – likely winding burnt out) - Power supply unit for control system UV 101B defective - LT module 2x50A defective Net price without dismantling and unloaded, ex works Luckenwalde (Germany), without transport

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1179736, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, faceplate diameter: 500 mm, Submission of a bid obligates the buyer to collect the item on time by the end of 2025! TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 508 mm Travel Z-axis: 508 mm Fgodpfxox Agv Ie Ad Hek Swivel range: +120 to -35 degrees Rotational range: 360 degrees Faceplate diameter: 500 mm MACHINE DETAILS Electrical data Voltage: 440 V Phases: 3 Frequency: 50/60 Hz EQUIPMENT Two-axis rotary table Standard T-slots Precision alignment bore

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1188877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control HRT 160 4th axis Fgedpfx Aex Afpgjd Hek 11 off BT40 toolholders High flow coolant system Lighting Enclosed guarding Manual

Condition: good (used), Year of construction: 2002, Machine is in good condition. Fgjdpfx Adotwpams Hsk Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2 year 2022 Control Siemens SlimLine Travels: X-500 mm Y-450 mm Z-400 mm B -5 / +110 ° C 360 ° Spindle max 15,000 rpm Tool magazine for 60 tools BBT40 Through-spindle coolant 70 bar Chip conveyor Filter paper High-pressure coolant pumps Workpiece probe, tool probe Quickset (rotary axis calibration) Fedpfexyi Hwox Ad Hsgk Machine in very good condition, available at our warehouse in France, 01360 Loyettes.

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 250 U With Heidenhain TNC 640 path control Year of manufacture: 11/2016 Travel ranges: X 600 Y 550 Z 450 mm Speed range: 20 – 18,000 rpm, stepless Includes the following accessories: NC rotary tilting table Ø 450 mm x 360 mm (T-slots for SRT) Vertical tool changer with 30 magazine positions (HSK 63) ICS 40 bar with paper band filter Purge air for linear scales Polysafe filter ICS 40 bar Scraper belt conveyor Coolant system Blow-off device Air blast through spindle center Manual cabin door, manual cabin roof Polycarbonate safety windows Fodpfjxnbxhox Ad Hegk Heidenhain electronic thermal compensation Electronic handwheel BLUM tool breakage / measurement A2 3D touch probe Heidenhain Chip flushing pistol Oil mist extraction Control cabinet cooling unit (RITTAL) 4 height-adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,010 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 520 mm, controller model: Fanuc OiMD, spindle speed (min.): 8,000 rpm, High pressure CTS 20 bar Fgsdpfsxz R Ifex Ad Hjk Auger

Condition: new, Year of construction: 2025, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, torque: 108 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece weight (max.): 800 kg, table width: 600 mm, table length: 1,400 mm, table load: 800 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SPECIAL CLEARANCE SALE AT DISCOUNTED PRICE BRAND NEW MACHINING CENTRE Control and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Additional equipment: Prepared for 4th axis (rotary table) Full enclosure with side folding inspection windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Fedpfx Asxx S Tdsd Hjgk This offer applies only to this LAGUN L1200 stock machine (interim sale reserved).

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available. Fodew I Hzpspfx Ad Hjgk

Condition: used, Year of construction: 2010, functionality: limited functionality, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: MOCON 17.28, table width: 1,626 mm, table length: 710 mm, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Vertical 3-axis machining center Haas VF6 / 50 HE Linear guideway machine with up to 610 Nm torque (at 500 rpm) Travel paths: X 1626 mm Y 813 mm Z 762 mm Linear position measurement system Fodpfx Adsw Rbx Uo Hegk 2-speed gear spindle SK50 with 7,500 RPM and 22.4 kW Automatic tool changer with 30 +1 positions Internal coolant supply with 1000 psi (approx. 70 bar) Coolant tank 360 liters Spiral chip conveyor Includes: Oil mist extraction unit Ethernet interface RENISHAW wireless tool measurement system Additional loading fixture for inserting tools into the machine Macro programming enabled. The machine is only partially functional.

Condition: excellent (used), Year of construction: 2008, Dugard Eagle 450 XP VMC, Siemens Control - Machine from a Training School - Excellent Condition Fgjdpexz Dpvefx Ad Hsk X Axis Traverse - 450mm Y Axis Traverse - 350mm Z Axis Travel - 380mm Table Size 700 x 320mm Spindle Nose To Table Surface 135 - 515mm Max Feed Rate - 10 m/min Max Table Load - 150kgs Spindle Taper - BT40 Spindle Power 8.5kW Spindle Speeds - 10,000RPM Machine Weight - 2,200kgs Tool Changer Time - 6 Seconds Machine Footprint - 1500mm Left To Right x 2050mm Front to Back x 2050mm High

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min Fgedpfx Adexx A Ewj Hek tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No reserve price – guaranteed sale to the highest bidder! Bidding obligates buyers to collect the machine within the specified period: between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 stations Tool holder: ISO-B40 Travel Paths X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible transport load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible transport load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Fgodjxxzpuepfx Ad Hsk Note: The tool holders visible in the images are included in the scope of sale and delivery. The tools clamped in these holders, such as drills, reamers, milling cutters etc., are not included in the scope of sale or delivery. The drive for the head tilting axis is missing.

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Fgodpfx Adjxxyd De Hok Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: P082WG406, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 500 mm Y-axis: 400 mm Z-axis: 330 mm Spindle speed: max. 10,000 rpm Rapid traverse (axes): max. 54 m/min Fodpfx Ajxxvi Ajd Hjgk Table & Loads Permissible table load: 300 kg Maximum tool weight: max. 2 kg Maximum total tool weight: max. 23 kg Tool dimensions Overall length: 200 mm Shank length: 120 mm Tool diameter: 80 mm Maximum height: 440 mm MACHINE DETAILS Weight: 2,100 kg Mains supply: 3-phase Power rating: 11 kVA

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30.000 [mm/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] Fgedpjxzu T Sefx Ad Hek WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 23.456 [h] - Number of working hours : 16.703 [h] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - CNC option : extanded Memory 500 Mo - CNC option : High accuracy mode BⅡ - Type of divisor : 4e axe CNC intégré * manufacturer : YUKIWA * model : DRC170-EU * travel 4th axis : 360 [°] * indexing precision 4th axis : 0,001 [°] * clamping diameter : 140 [mm] * center height : 135 [mm] * with counter bearing * Coolant tank : 150 [l] * with high-pressure pump : 15 [bars] * With cabin washing - Coolant through spindle - Tool probe - Electric transformer

Condition: used, Year of construction: 2007, Haas TM 2 Fgjdpfx Aoxp Hx Ned Hok TRAVELS X 1016MM Y 406 MM Z 406MM

Condition: good (used), Year of construction: 2010, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: 18i-MB, workpiece weight (max.): 1,000 kg, table width: 600 mm, table height: 900 mm, table length: 1,200 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT40, number of slots in tool magazine: 24, Equipment: chip conveyor, Tongtai (Topper) TMV-1100A – Vertical Machining Center Fjdpfxoxzr Tis Ad Hsgk Year of manufacture: 2010 Control: FANUC Series 18i-MB Equipment: incl. 4th axis / rotary table Technical Data Travel distances: X-axis: 1,100 mm Y-axis: 600 mm Z-axis: 530 mm Table: Table size: 1,200 × 600 mm T-slots: 5 slots Max. table load: 800–1,000 kg Spindle: Spindle taper: BT-40 Max. speed: 8,000 rpm Spindle motor: approx. 9 / 7.5 kW Feeds: Rapid traverse X/Y/Z: 30 / 30 / 24 m/min Cutting feed rate: 1 – 10,000 mm/min Tool changer: 24-station magazine Max. tool diameter: 89 mm / 125 mm (with / without adjacent slot) Max. tool weight: approx. 7 kg Machine overall: Machine weight: approx. 7,500 – 7,700 kg Machine height: approx. 2,920 mm Machine length: approx. 2,800 mm Machine width: approx. 2,800 mm Equipment / Options: FANUC 18i-MB control Full enclosure Coolant system Chip conveyor 4th axis / CNC rotary table

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Fgsdpsxzqq Tjfx Ad Hsk Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: repair required (used), Year of construction: 2003, operating hours: 926 h, functionality: limited functionality, travel distance X-axis: 760 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 460 mm, controller manufacturer: Fanuc, controller model: 16iM, table width: 410 mm, table height: 900 mm, rotational speed (max.): 15,000 rpm, We are selling our Kitamura numerically controlled machining center, model MY-3Xi, with FANUC 16iM CNC control system. The machine is out of operation; tool changer must be referenced. Year of manufacture: 2003 Travel: 760x455x460mm Tool magazine positions: 30 Spindle speed: 15,000 rpm Spindle taper: (BIC-PLUS) ISO/BT40 Fgodpjxzqgusfx Ad Hjk 2-stage gearbox Table size: 410x900mm Control on-time: 38,746 h Milling time: 926 h Remarks: - The price does NOT include any accessories! - Pickup by the buyer, ex works. - Pickup date to be arranged with the seller. - No warranty - Advance payment (invoice) or cash payment on collection

Condition: excellent (used), Year of construction: 2012, operating hours: 3,540 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Siemens, controller model: 840D SL, table load: 300 kg, spindle speed (max.): 24,000 rpm, spindle nose: BBT Big+, number of slots in tool magazine: 25, Equipment: documentation/manual, DMG Mori Milltap 700 machine for sale, in new condition. Fgsdpfjxghpwex Ad Hek Siemens 840 D SL control. We bought the machines because of the small space requirement, 24,000 spindle, fast tool change and 60 meter rapid traverse. The machine can be viewed and tested under power. We can help with packaging and loading onto a truck.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, controller manufacturer: FANUC, controller model: 0i-MD, Equipment: chip conveyor, documentation/manual, Milling spindle up to 15,000 rpm "In-Line" direct drive Power 7.5 kW (S6/40%) Travel distances X=450mm Y=400mm Z=400mm; 36m/min Fsdpfx Adjxzntrs Hsgk Tool taper size 40 according to DIN 69871-A, pull stud according to DIN 69872-A Spindle taper air blast device High-speed automatic tool changer as double-arm changer for 24 tools Linear guides on all three axes Required leveling elements at machine bed for adjustment Fully enclosed splash guard + coolant system + work area light Documentation: Spinner manual and Siemens manuals in digital format on CD-ROM Two-tone paint finish RAL 7035/5008 Chip conveyor

Condition: used, x-travel 760 mm y-travel 410 mm z-travel 500 mm Fgedsxxb I Depfx Ad Hok

Condition: like new (used), Year of construction: 2010, operating hours: 4,800 h, functionality: fully functional, The used QUASER MV 184 E 3-axis vertical machining center is a medium-sized CNC vertical machining center with a cast iron structure and roller guideways for the table movement. Travel: X 1020, Y 610, Z 610 mm; table size: 1200×600 mm with a maximum load of 500kg. Fjdpfx Adexxb Dls Hegk Spindle: ISO-40 (DIN 69871) at 12,000 rpm (up to 18KW), cooled by a dedicated chiller, high-pressure coolant through the spindle, RANDOM tool changer with a 30-position swing arm, and belt chip conveyor. Year of construction: June 2010 (installed 2012), equipped with FANUC 0i-MD CNC with color LCD, Manual Guide i, remote handwheel, RS 232 serial port, and memory card. Machine in PERFECT condition with only 4,800 cutting hours, various additional tooling available.

Condition: excellent (used), Year of construction: 2011, operating hours: 18,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, table width: 1,150 mm, table length: 560 mm, table load: 700 kg, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,600 h, number of slots in tool magazine: 30, tool length: 250 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, including Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Equipped with M&H probing system / tool measurement with 1x POSfix 100mm vise (see left) with 1x quadruple clamping system (see center) Magazine with 30 tool positions, SK40 tool holder. Internal coolant supply, through-spindle air, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, even fewer hours on the Lehmann 4th/5th axis. Viewing under power is welcome by prior arrangement, (almost) anytime. Single-operator use (the machine was exclusively operated by myself). Fgodpoxzhfnefx Ad Hek The reason for sale is a private accident about two years ago. For further questions and for optional accessories regarding the machine or Lehmann 4th/5th axis, I am gladly at your disposal. Note: The LANG clamp and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for demonstration purposes only!