Used Veneers Process for sale (20,667)

Condition: used, tank capacity: 1,540 l, GENERAL INFORMATION Equipment: Spray head Design: vertical Remarks: Homogenizer mounted on the bottom (see photos) is included in the scope of delivery Heating/cooling: available Insulation: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: propeller Agitators: 2 agitators Pedpfx Aheycirgs Hogg Agitator type: anchor agitator Location: external storage Cylinder temperature control: double jacketed Nameplate: Volume: 1,540 liters Double jacket volume: 100.0 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Previous application: pharmaceutical TANK Max. permissible operating temperature: 200 °C Support style: height-adjustable legs Number of legs: 3 pieces INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on the upper head AGITATOR Agitator mounting: on the tank Agitator equipment: Scrapers are mounted on the anchor agitator (see photos) AGITATOR 2 Agitator mounting: on the tank

Condition: used, tank capacity: 1,190 l, GENERAL Equipment: Crane lugs Design: Vertical Heating/cooling: Available Insulation: Available Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.0 bar Agitator: Propeller Location: Outdoor storage Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,190 liters Double jacket volume: 105.0 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: Used Last application: Pharmaceutical Podeyciraopfx Ah Hogg TANK Max. permissible operating temperature: 150 °C Support type: Height-adjustable feet HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / Dome: On upper head AGITATOR Agitator arrangement: Eccentric on upper head

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Excellent condition, little used. We speak English, German and ex Yu languages. Contact possible also via WatsApp Podpfx Ahevuxihj Hegg

Condition: used, Year of construction: 2000, total height: 1,300 mm, total length: 1,350 mm, total width: 500 mm, Empty weight: 200 kg - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Opening width [mm]: 1000 - Min. veneer thickness [mm]: 0.4 - Max. veneer thickness [mm]: 2 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 15 - Transport dimensions: 1350mm x 500mm x 1300mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Pgodpfx Aeychxfsh Hjg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Baader 185 Fish Filleting Machine With Baader 51 skinner attached Overhauled in 2022 and little use since Psdpfx Ajyfhx Reh Hegg Last used on Cod. Lots of pictures and videos available on request

Condition: like new (used), Year of construction: 2022, functionality: fully functional, TM-California-4: 4-Axis CNC Machining Center Type California/4-4 • CNC machining machine suitable for aluminium profiles • Automatic opening and closing of the safety cover • Spindle movement via linear guides and servo motor • Equipped with ISO 30 spindle • Power 7.5 kW and speed 24,000 rpm • Electrically rotatable spindle from 0° to 180° • Pneumatic profile stop on both left and right sides • 6 pneumatic profile clamps • The profile clamps are manually positioned as standard • Tool magazine on the right with 6 slots + disc cutter • Automatic tool changing • Automatic cutter length measuring system Pjdpex Hd Hzsfx Ah Hsgg • Automatic cooling mist with micro-dosing system • Industrial PC and remote service system • 21.5" PC with Windows 10 operating system • Includes Uni-Link CADCAM software with Uni-Link On Board • User-friendly interface for operation and visualisation • Machining length: 4,200 mm • Machinable profile cross-section: 230 x 230 mm • Accuracy: 0.1 mm/m

Condition: good (used), Keyence XG-7501P multi camera image processing system control controller XG7501P Pedpfxeib Dncs Ah Hsgg Manufacturer: Keyence Manufacturer Number: XG-7501P Type: multi-camera image processing system, control unit Side cover included Country of manufacture: Japan Item condition: This item comes from a business liquidation of one of the largest auto parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some items have storage marks.

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: TL 75, Self-propelled high-frequency welding machine 10 kW with table, welding length approx. 20 m, currently still in operation. Welding beam length approx. 100 cm. Minor defects include slight air loss, laser not working properly, one switch defective, welding automation not functional. The system is currently still running daily between 6 and 8 hours. Various spare parts are also available. The machine can be inspected at our facility until mid-February. Podpfxjydvv Ij Ah Hsgg

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Pgjdpfx Aovvkazsh Hjg

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Psdpsvvkbljfx Ah Hogg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 12638, electrically heated, with step strip, gold anodized plates, dimensions 2950 x 1600 x 2250 mm, Psdeybbm Tepfx Ah Hegg new heating plates 2023, 21.1 kW, operating pressure 355 bar, 4 x 90 mm cylinders, pressing pressure 2.7 kg/m², press force 900 kN, press room height 400 mm, pressing area 2550 x 1350 mm, 3.44 m², weight approx. 3.5 t very good condition Price ex location Transport available at extra cost!

Condition: good (used), functionality: fully functional, Cutting length 3100, with integrated extraction and handwheel adjustment, mobile, support table at rear, running gear in good condition Psdpfx Aoyba U Noh Hogg Price ex location Transport available at extra cost!

Condition: like new (used), Thread splicer with glue Zigzag stitching Heater with air blowing Pedal control Pgodpsydpinefx Ah Hog 380V power supply

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Pjdpfx Ajydh Ageh Hsgg Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost! Pgsdpfx Ahjyayzaj Hjg

Condition: ready for operation (used), functionality: fully functional, The Lutetia T5 tumbler is designed for processing facilities seeking homogeneous and repeatable mixing on large volumes. It ensures even distribution of ingredients while preserving the product structure. As a result, quality remains consistent from batch to batch, securing the manufacturing process. Additionally, the tank design promotes controlled product flow to minimize poorly processed areas. This tumbler integrates easily into existing production environments, as its architecture is engineered for intensive use. Its robust construction ensures excellent stability during operation, even under heavy loads. Furthermore, the accessibility of key areas simplifies cleaning and maintenance operations, reducing downtime and improving daily machine availability. Refurbished by Europ'Equipement, the Lutetia T5 tumbler undergoes a rigorous check of all mechanical and functional elements. Users benefit from a reliable piece of equipment, ready for operation without major modifications. Refurbishment also allows for controlled investment while maintaining a high performance level. Consequently, this solution reflects a sustainable approach focused on reliability and long-term cost reduction. The Lutetia T5 is particularly suitable for applications involving meat processing and value-added products that require consistent and regular mixing. It also offers excellent operational flexibility to accommodate various recipes and production requirements. Therefore, this tumbler is an optimal choice for industrial users aiming to enhance their processes while ensuring quality, consistency, and safety. Technical specifications: Meat + brine capacity: 3,800 to 4,000 kg Drive: two motors Control: programmer with variable speed drive Dimensions (L × W × H): 3,500 × 2,050 × 2,450 mm Weight: 3,000 kg Tank volume: 6,750 L Pedpfx Aoydaftsh Hjgg

Condition: ready for operation (used), functionality: fully functional, The Lutetia T5 tumbler stands out as an industrial solution designed for high-volume production sites requiring precise control of mixing and vacuum marinating processes. Firstly, its vacuum operation optimizes brine absorption and improves the diffusion of ingredients deep into the product. As a result, sensory quality improves while recipe consistency remains stable over extended cycles. Additionally, this technology directly contributes to better product integrity after processing. Furthermore, the slow, controlled rotation of the drum ensures gentle handling of raw materials. The gradual movement minimizes mechanical stress and preserves meat structure, even with large batch loads. Consequently, yield loss is reduced and product appearance remains uniform. Moreover, the drum’s internal design promotes smooth circulation of the mass, enhancing process repeatability and securing productivity. The food-grade stainless steel construction ensures exceptional robustness and durability suited to intensive industrial environments. On the one hand, it offers excellent resistance to corrosion and wear. On the other, it simplifies cleaning and maintenance operations. This helps reduce downtime and maximizes machine availability. At the same time, its compact footprint allows for seamless integration into existing production lines. In summary, the Lutetia T5 meets the needs of processors seeking a reliable, high-performance tumbler specifically engineered for large volumes. It provides a strategic tool to optimize yields, secure consistent product quality, and maintain stable performance over the long term. Therefore, it represents a relevant investment for facilities aiming for continuous production with stringent quality control. Technical specifications: Dimensions (L × W × H): 3,500 × 2,050 × 2,450 mm Meat + brine capacity: 3,800 kg Total drum volume: 6,750 L Drum diameter: 1,950 mm Operation: Vacuum Mixing type: Slow drum rotation Pgsdoyc Uqbepfx Ah Hjg Construction: Food-grade stainless steel Empty weight: approx. 3,000 kg

Condition: excellent (used), Year of construction: 2018, Source Technology PowerHeater and FlexiCut machines. Direct from meat-free facility, used for making vegetarian 'chicken style' products. In excellent condition and rarely available for sale as used machines. New price of these machines is £750,000 Psdjt Rh T Djpfx Ah Hsgg

Condition: excellent (used), Flake ice machine on stand, can produce up to 3.2 tonnes per day of flake ice. Lovely condition. 3 in stock. Pedpjh Nnd Rofx Ah Hegg

Condition: excellent (used), Year of construction: 1988, I sell the cross veneer guillotine Josting QFS 800. Year 1988 (2pcs. available on stock). Cutting length 800mm. Psdpfx Ahsyc Nilj Hogg Cutting height 60mm. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1967, I sell the veneer guillotine Josting PFS 2100. Year 1963 and 1967 (2pcs. available on stock). Cutting length 2100mm. Cutting height 60mm. Cutting width 20-680mm. Pgjdpfx Asyc Nh Ush Hjg Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. Pgedpfx Ast Uirceh Hsg FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Pedpfx Ajvxli Ash Hegg Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1987, I sell the double knife veneer guillotine OMPEC OA 3200/400. Year 1987. Pgjdpoyc I Tvjfx Ah Hjg Cutting length 3200mm. Cutting height 80mm. Cutting width 20-450mm. Very good condition. Available immediately.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 13939, total width: 1,520 mm, total length: 3,550 mm, total height: 2,000 mm, type of input current: three-phase, temperature: 120 °C, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 400 bar, We are offering this used OTT Stabil-3013 veneer press, year of manufacture 1984. Pgjdpfxeyc Hyzj Ah Hjg Model: Stabil-3013 Machine number: 13939 Rated voltage: 380 V Current type: AC • Pressing area: 3,000 × 1,350 mm • 6 cylinders • Interchangeable aluminium plates • Protective film Frequency: 50 Hz Year of manufacture: 1984 If you have any questions or need more information, please feel free to send us a message or call us.