Wood processing center

Holz-Her Dynestic 7532 10.5 automatic m

Second-hand machine

Year of manufacture: 2019


Features and technical specifications:

- For conventional nesting machining with wear plate
- Machine frame in welded construction
with ground and hardened prismatic guides for the travelling column, machining head and consoles
- Travelling column in gantry design
- Rack and pinion drive, helical, in the X and Y directions,
Ball screws in the Z-axis for precise positioning

- Machining dimensions:

- Max. support area on nesting table:
X = 3100 mm Y = 1560 mm

- Max. travel distances:
X = 4695 mm Y = 2100 mm Z = 293 mm

- Max. clearance height of DYNESTIC table
Z = 100 mm from the top edge of the table (excluding wear plate)
- Maximum programmable speed
Vector speed: 128 m/min
X = 80 m/min Y = 100 m/min Z = 25 m/min
- DYNESTIC table:
- Fixed, continuous machining table with grid markings
- Continuous grooving in the X and Y directions
- Groove spacing: 50 mm
- Includes 25 metres of sealing cord for clamping the wear plate
- Vacuum zones: single-circuit vacuum system
- Drilling unit 7877:
- 19 spindles
- Drive power: 1.7 kW

- 13 vertical spindles:
- individually selectable
- U-shaped layout
- 5+4 in the X-direction and 4 in the Y-direction
- 32 mm grid
- Max. drill bit diameter: 35 mm
- Total drill bit length: 70 mm from the bolt-on end (depending on panel thickness)
- Spindle extension stroke: 70 mm
- Direction of rotation: alternating clockwise and anti-clockwise
- n(max): 1000 – 4400 rpm, continuously adjustable
- Mounting: M 10 thread - 11 mm interference fit
- No tools required, no mounting bracket

- 6 horizontal spindles:
- 2 double drilling spindles in the X-direction
Kjdpfxszlbrpe Ap Ajlw
- 1 double drilling spindle in the Y-direction
- Mounting: M 10 thread, 11 mm interference fit
- Maximum total drill length: 63 mm from the threaded end
- No tools required, no mounting bracket
- Milling unit 7842:
- Power: 12.0 kW (S6)
- n(max) = 1,000 – 24,000 rpm, infinitely variable
- Maximum output at 12,000 rpm to 24,000 rpm
- Air-cooled
- With HSK-F 63 tool holder
- With right-hand threaded nut (for clockwise-rotating tools)
- With collet chuck with HSK shank
- Ceramic ball bearings (hybrid bearings)
- Maximum tool weight: 6 kg (including holder)
- Tools: milling and grinding tools, max. Ø 160 mm
- Safety guarding in accordance with the CE standard

- Safety fencing on the sides and at the rear
- Vacuum pump: 500 m³/h, dry-running
- Operator safety ensured by photoelectric sensors
in the front section of the machine
- Hand-held control unit for remote control of the machine
with the following operating functions:
- Start/stop of the machining programme
- Speed control of the machining cycles
- Reset button
- Manual feed / rapid traverse for all axes
- Emergency stop
- CAMPUS V7 CAD/CAM software (1 machine licence), comprising:
- CAMPUS NC-HOPS:
- Graphical variant system with WOP and CAD/CAM features for creating
Part variants using macro technology
- CAMPUS MT Manager
- CAMPUS Workcentre
- CAMPUS DXF interface
- Automatic central lubrication
- Automatic lubrication at defined lubrication intervals
- Additional dust sealing via positive pressure in each guide carriage

- Simultaneous lubrication:
- for all linear guides in the X, Y and Z directions
- for all ball ...