Used Universal Washer for sale (4,877)

Year of construction: 2020, condition: used, Vixen Wash Type TSC with Siemens Simatic HMI Control with (2) x Filter Mists, Basket Size 490mm x 490mm. S/No. 3029 (2020). Country of Origin: United Kingdom Fodpfx Ajyidrlsc Nofu Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition. Ffjdpfx Acjyg Dk Se Neu

Condition: good (used), Year of construction: 2002, operating hours: 49,731 h, Manufacturer: HERMLE | Model: U 630 T | Year of manufacture: 2002 | Operating hours: approx. 49,731 | CNC control: iTNC 530 | Vertical machining | Milling machine | Control panel with screen and buttons | Robust metal construction | Dimensions: approx. 2900 mm x 2200 mm x 2400 mm (W x H x L) | The specified dimensions are approximate values. All other details without guarantee. | Grey | Steel Ffedpfxoyic Sqj Ac Nju

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Ffjdpfx Aevc Aw Sjc Neu Coolant: System with feed Heidenhain measuring device *

Condition: good (used), Year of construction: 2001, operating hours: 54,057 h, Manufacturer: HERMLE | Model: U 1000 T | Year of manufacture: 2001 | Operating hours: approx. 54,057 | Universal milling and drilling machine | CNC control (TNC 426) | Automated tool clamping | Precision motion guidance | Dimensions: approx. 3,600 mm x 2,450 mm x 2,800 mm (W x H x L) | The stated dimensions are approximate values. All other information provided without guarantee. | Grey | Steel Fodpfxeyic R To Ac Njfu

Condition: good (used), Year of construction: 1999, Manufacturer: HERMLE | Model: U 630 T | Year of manufacture: 1999 | Operating hours: approx. 54,135 | Control: Heidenhain TNC 426/410M; Spindle mount: SK 40 (or ISO 40); Max. spindle speed: 7,000 rpm; Table clamping surface: approx. 900 x 528 mm; Max. table load: 400 kg; Tool changer: 16-position magazine; Machine weight: approx. 4,800 kg; with accessories; | Dimensions: approx. 3000 mm x 2200 mm x 2400 mm (W x H x D) | The specified dimensions are approximate. All other information without guarantee.| Grey | Steel | Working travel (X/Y/Z): 630 mm / 500 mm / 500 mm Ffjdpfxsyic Rys Ac Nsu

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle Fedpfx Ajtt R E Tec Njfu 3D tracer Renishaw Tool breakage control Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller model: MILLPLUS, total height: 2,500 mm, total length: 5,500 mm, total width: 4,500 mm, rotary table diameter: 630 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 26,350 h, number of slots in tool magazine: 60, mount diameter: 40 mm, tool diameter: 100 mm, DECKEL MAHO DMU 60 P Hi-dyn CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Connection: 44 kVA - Linear scale resolution X/Y/Z-axis: 0.001 mm - Input increment X/Y/Z-axis: 0.001 mm - Position tolerance in X/Y/Z-axis: 0.010 mm - Max. tool length from spindle nose without tool breakage monitoring: 350 mm - NC rotary table clamping surface: 630 mm diameter - T-slot spacing: 63 mm - Number of T-slots: 9 - Centering bore: 50 mm diameter - Max. rotation speed of table plate: 10.7 rpm - Feedrate: 3600°/min - Measuring system resolution: 0.001° - Including chip conveyor and cooling unit - Note: The machine can be transported on a truck with a width of 3000 mm. Ffodpfx Acex E T R Tj Nou Attention: The item must be collected on a binding date between 04 and 12 March 2026, to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: ready for operation (used), power: 15 kW (20.39 HP), empty load weight: 5,200 kg, Punching line for flat iron and corners - CNC controlled (Siemens Sinumerik) - With CNC automatic length feeding system: 7000 mm - 4 punch stations 100 Ton – Cap: Ø 50 in 20 mm thickness Fodjygyyvspfx Ac Nsfu - Movements: X=7000 mm, Y:760 mm - Max width: 750 mm - Max height: 20 mm in flat steel or 240 mm in U / I beams corners Punchingcapacity: 4 x 100 Ton each Dia x sheetthickness: Ø 39 x 20 mm / Ø 58 in 13 mm / Ø 90 x 8.5 mm Strokes/min: 10 -> 100 str/min Work level: 1075 mm

Condition: ready for operation (used), Sheet format: 100-1000x40-1120mm, max. carton thickness: 20mm, output carton/ paper: 7-60/ 7-40 sheets/min, weight: 1t, with pressure belt and sheet laminating station, including documentation. Fjdpfxoihp Nfj Ac Nsfu

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Ffodpfsip D Rhex Ac Neu

Year of construction: 2006, condition: ready for operation (used), Output: 1.5t steam/h, max. nominal power: 1093kW/h, gas pressure: 50mbar, fuel: natural gas, including water container, two pumps, safety devices and steam dryer. Fodpfx Acsf Tdcuo Nefu

Condition: ready for operation (used), Max. rotational speed: 2000/min, with instruction manual. Ffsdpfx Acjlbmtge Nou

Condition: ready for operation (used), Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible. Ffedpfjq Npf Uox Ac Nju

Condition: ready for operation (used), Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. Ffedpfjlbmtnex Ac Nou

Year of construction: 1999, condition: ready for operation (used), Power: 365-946kW, capacity: 141l, max. operating temperature: 184°C. Fsdpfx Aceg R Im Sj Nofu

Condition: ready for operation (used), Weight: 2.2t, including documentation. Fsdpfxemqly Us Ac Nsfu

Year of construction: 1997, condition: ready for operation (used), Tool length: 250mm, max. tool weight: 6kg, control: Heidenhain CNC 234, connected load: 40kVA, machine dimensions (LxWxH): 4700mm/4100mm/2300mm, weight: approx. 2.8t, operating hours: 43,408h. The guide rail of the front door is broken. Documentation available. An on-site inspection is possible. Fsdpfx Aeulzlcec Nefu

Year of construction: 2014, condition: ready for operation (used), A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible. Ffodpfxev Sufte Ac Nsu

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible. Ffodpfxewtg Ibo Ac Neu

Year of construction: 1997, condition: ready for operation (used), A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible. Fodpfxsyddyuj Ac Nsfu

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Fsdpfx Asxtpqvjc Nefu

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Ffedpstuwk Ujfx Ac Neu

Condition: ready for operation (used), A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible. Ffodsx Hwn Eepfx Ac Neu

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Ffodpfjx Hz Rkex Ac Nou