Used Washer for sale (1,271)

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Gsdpey I Nugofx Ab Djit Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Godpfjy H Aizjx Ab Djit FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2013, condition: good (used), Bastra / Bayha & Strackbein G.M.B.H. Crate Washer • Type: 074-DSKM • Serial number: 05386 • Year of construction: 05/13 • Power 400 V, 14.8 kW • Electric heating • Adjustable thermostat control for water heating • Detergent / soap dosing pump Gisdpfx Absyx I T Aj Dst • High pressure wash system • Rinse facility • Stop / Start control panel with reset facility • Wash opening clearance: 510mm W x 440mm H • Belt width: 400 mm • Machine dimensions: 2500mm L x 860mm W x 1470mm H

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Gjdpfsyxz Rhox Ab Dsit Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting Giodpfx Abjxpxyro Dot

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Gedpfx Aexp Urdob Dsit Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers. Gijdeq Nf S Rjpfx Ab Djt

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Giodpfx Asfz Dvvjb Dst ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Gedpfx Abjfz Ax Se Deit ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Godjflpmqspfx Ab Deit The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Gisdjfzrapopfx Ab Dst • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control Godpfx Aofz A D Nob Dsit • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD Gedpfxev Dpy Nj Ab Doit

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Gjdpovxtavsfx Ab Dsit

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Godpfx Abevrfivo Doit

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Gisdpfx Abswg E D Io Djt

Condition: used, Year of construction: 2006, Manufacturer: Kronen Model: GEWA 3800 V Year: 2006 Condition: Used Serial number: 379 Gisdpfxjy R S R Ne Ab Dst Stock number: 3368 Capacity: max. 1800 kg/h Water inlet: 2 3/4" Water outlet: 2 x 2" Infeed height: 1103 mm Discharge height: 771 mm Power: 3 x 400V, 50Hz, 5.9kW Dimensions: 3807 x 991 x 1500 mm Weight: 583 kg

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Giodpfx Abjt Ity De Det Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: new, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 11/130 EQUIPMENT KRANZLE pressure gun (M22 / quick connector) KRANZLE spray lance (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose KRANZLE external water filter Gisdpfsy Sg Swex Ab Dst WHY CHOOSE THE KRANZLE THERM CA 11/130? The THERM CA 11/130 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A key advantage of this model is its power supply via a single-phase 230V socket, which translates into excellent mobility in terms of power supply points. The THERM line places a primary emphasis on smooth operation and continuous operation, making the CA 11/130 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. A high-pressure gun with lance, 10m high-pressure hose, and a Power nozzle are standard. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. Single-phase power supply (230V) The device is brand new.

Condition: new, operating pressure: 150 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 150 °C, KRANZLE THERM CA 12/150 TECHNICAL DATA: Model: KRANZLE THERM CA 12/150 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 720 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 3.8 / 3.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 12/150 WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick connector) Spray lance: KRANZLE (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose WHY CHOOSE THE KRANZLE THERM CA 12/150 WASHER? The THERM CA 12/150 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also used by private customers who value the highest cleaning standards. Gijdpfx Aey Sgyueb Dst The THERM line emphasizes smooth operation and continuous operation, making the CA 12/150 model suitable for use in a wide range of industries. Additional handles allow the unit to be transported with additional equipment. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster attachment changes than traditional threaded systems. KRANZLE THERM CA 12/150 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, operating pressure: 180 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 150 °C, KRANZLE THERM C 13/180 TECHNICAL DATA: Model: KRANZLE THERM C 13/180 Manufacturer: KRANZLE Catalog number: 628210 Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 780 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 150 Operating pressure (bar): 180 Maximum pressure (bar): 200 Connected power (kW): 4.8 / 4.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM C 13/180 WASHER EQUIPMENT KRANZLE M2000 pressure gun (M22 / quick coupler) [12492] Spray lance: KRANZLE (quick coupler) [12420] 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. [D25045] 10m Professional-Class Pressure Hose [44878] Gedpfx Ajy Sgkyob Djit WHY CHOOSE THE KRANZLE THERM C 13/180? The THERM C 13/180 model is ideal for factories, workplaces, and industrial halls. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the C 13/180 model suitable for use in a wide range of industries. Additional handles allow for easy transport of the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM C 13/180 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: new, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TECHNICAL DATA: Model: KRANZLE THERM 1165-1 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Gijdpfx Aboy Sgdyj Dst Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 WASHER EQUIPMENT KRANZLE Starlet [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat stream power nozzle [D2507]. A flat high-pressure jet with high surface coverage and excellent dirt removal. 10m Professional-class, double-braided steel pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1? The THERM 1165-1 is ideal for factories, workshops, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 model suitable for use in a wide range of industries. Additional handles allow for easy transport of the unit along with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The 1165-1 model is equipped with a digital thermostat, flow sensor, overheating protection, and an operating hour meter. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded attachments. The device is completely new.

Condition: new, functionality: fully functional, operating pressure: 165 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 1165-1 TR TECHNICAL DATA: Model: KRANZLE THERM 1165-1 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1165 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Gedoy Sf N Uopfx Ab Doit Operating pressure (bar): 165 Maximum pressure (bar): 180 Connected power (kW): 6.4 / 5.0 Power cable length (m): 7.5 Weight with accessories (kg): 222 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1165-1 TR pressure washer EQUIPMENT KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m Professional-grade pressure hose [443812] WHY CHOOSE THE KRANZLE THERM 1165-1 TR? The THERM 1165-1 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1165-1 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose, hose reel, and a 25° power nozzle. The device also features a D12 quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1165-1 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional equipment. A brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. The standard equipment includes a high-pressure gun with lance, 20m high-pressure hose on a hose reel, and a power nozzle. The device also features a quick-release coupling system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Godpfx Aev Tm Ayob Deit Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: new, functionality: fully functional, operating pressure: 195 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 895-1 TECHNICAL DATA: Model: KRANZLE THERM 895-1 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 895 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 195 Maximum pressure (bar): 215 Connection power (kW): 6.4 Power cable length (m): 7.5 Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1015 KRANZLE THERM 895-1 EQUIPMENT: KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m Professional-Class Pressure Hose WHY CHOOSE THE KRANZLE THERM 895-1? The THERM 895-1 is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 895-1 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's lifespan. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a D12 quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 895-1 Giodpfsy R U D Ssx Ab Det RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.