Used Universal Sheet Metal Processing Machine for sale (73,905)

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller Gkjdjif Sg Sjpfx Ak Ujb - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Gkjdpfx Akowz Ukys Ujb Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, total height: 2,600 mm, overall weight: 7,000 kg, Main technical indicators: 1. Maximum processing width: 1300mm 2. Processing thickness: 0.5-100 mm 3. Minimum processing size: ≥50×50 mm 4. Feeding speed: 0.5-6m/min 5. Roller brush speed: 8-20r/s 6. Revolution speed: 8-12r/s 7. Rated power: about 88KW 8. Abrasive belt size: 2200×1620 mm 9. Sand roller size specifications: Φ300×400 mm 10. Worktable height: 900-980mm 11. Gjdpfxezwmpke Ak Uekb Equipment noise: ≤ 85 dB 12. Dust removal efficiency: ≥ 85% 13. Required vacuum air volume: 5000 cubic meters/hour 14. Control system: Siemens PLC CNC

Condition: new, functionality: fully functional, Laser source: MAX Photonics G5 Laser head: Boci BLT4 autofocus head Gksdpfx Akswtzu Ao Ujb Control system: FSCUT 9100 Software: Cypnest+Cypcut Table size: 8200 x 3200 mm Load capacity up to 9600 kg Straight cutting area: 8850 x 3700 mm Bevel cutting area: 8100 x 3050 mm

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water cooler - Hanli Load capacity up to 3200kg Laser power - 12000 W X/Y positioning accuracy - ±0.05 mm/m Gkodpfx Akjwnqbzs Uob X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 EtherCAT-BUS Power supply - 380V 50Hz three-phase

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Gkedei Ar Ruspfx Ak Ujb Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration Gkjdpfxexu Uhvs Ak Usb - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Gsdpfjzy Uvkjx Ak Uekb Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 Gksdpfexwnbujx Ak Usb - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), TERMOZ LYON Gkedpfsm Dtncjx Ak Ueb tour à repousse

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN064871, Sound insulation, RFID chips, LiServ 4.0, energy measurement package, ME 5000, barcode scanner. Gjdpfozzmgkox Ak Ujkb

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. Gkedjzzlqnspfx Ak Ueb The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: good (used), Year of construction: 2007, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Gkedpfx Ajzzc Tmjk Usb Feed rate 0.4 – 2.6 m/min Number of spindles 6 pcs Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Condition: ready for operation (used), functionality: fully functional, actuation type: electric, number of rollers: 3, total length: 2,380 mm, total width: 620 mm, total height: 1,140 mm, input voltage: 400 V, For sale: a used, 100% functional three-roll sheet metal rolling machine with electric drive. The machine features a simple and very robust construction and is ready for use in a locksmith's workshop, production facility, or for sheet metal processing. The rolls are in good condition, with no significant grooves. Key technical data: - Machine type: 3-roll rolling machine - Power supply: 400 V (electric drive) - Maximum working width (sheet): 185 cm (1850 mm) - Overall dimensions (L x W x H): 238 cm x 62 cm x 114 cm - Technical condition: Used machine, fully functional, ready for connection. - Foot control: The machine is equipped with an external foot pedal (left/right), allowing the operator to work comfortably and freely manipulate the sheet with both hands. Gkedpfezzbv Tex Ak Usb - Manual roll pressure: The roll position is adjusted smoothly using two upper pressure screws with convenient cranks. - Grooves on the rolls: One end of the working rolls has grooves, which enable the rolling (coiling) of rods or pipes. - Construction: Massive, welded steel frame providing high rigidity during bending and minimizing vibrations. Transportation is the buyer's responsibility.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 13600 € 261.12 € 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Gkodpfxjwiryhj Ak Usb Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Gkedpfohq A Txox Ak Ujb Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time.

Condition: new, Year of construction: 2026, Custom-Made Machines Tailored to Your Production Needs. Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance. -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. Gkodshq Dbxepfx Ak Usb -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. -Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands. Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow. Built for Durability.. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year.

Condition: new, Year of construction: 2026, -TFON Edge Rounding Machine Specifications: Gkodpfx Ajui Ih Rok Ujb Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm Minimum Part Dimensions: 50 × 50 mm Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Machine Weight: 3.000 kg

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Gksdpfx Akjhq Dbms Ujb Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 (M) Gkjdpfx Ajiih Aaek Ujb -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. --Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line.

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Processing System: Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications. -Material Compatibility: -Mild Steel, Aluminum, Stainless Steel. -Working Thickness Range: -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Gkodsi E Tkaepfx Ak Usb Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Purification System -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Gksdpfx Aehq A T Uok Ueb Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially. Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements. Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces. Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing. Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface. Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Gkodpfx Ajylhkyjk Ueb Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution The machine is fully operational and in good overall condition.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Gkodpfxezv Rc Sj Ak Usb Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: good (used), Year of construction: 2003, operating hours: 25,000 h, functionality: fully functional, type of input current: three-phase, overall weight: 13,000 kg, FOR SALE: Finn-Power F5 S Turret Punch Press Available for purchase is a high-quality, Finnish-made Finn-Power F5 S turret punch press. Manufactured by the renowned Lillbacka Corporation, this machine offers robust performance and precision for demanding sheet metal fabrication. Technical Specifications: Machine Type: Finn-Power F5 S Manufacturer: Lillbacka Corporation, Finland Manufacturing Year: 2003 Punching Force: 300 kN Max. Working Pressure: 300 bar Machine Weight: 13,500 kg Gksdpjy Iwmwjfx Ak Usb Key Features: CE Certified: Fully compliant with European safety and quality standards. Heavy-Duty Build: The 13.5-ton machine weight ensures excellent stability and vibration damping for high-precision work. Proven Reliability: Built with industry-leading technology and patented Finnish engineering.