Used Sheet Folding Machine for sale (67,854)

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Nlsdpottc Uaefx Abwed

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 13778, Equipment: documentation/manual, Machine W&D 627 GS, Serial No. 13778 Nlsdpfxezlh Nbs Abwjd • Manufactured from 1999 • 2 printing units for the outside • 1 printing unit for the inside • Gummed/Self-seal/Hotmelt adhesive application • Outer flap section • 1 window section • Drive controllers converted to Indra Drive Bosch REXROTH by W&D • Smallest product size: 83 x 120 mm • Largest product size: 185 x 330 mm • Bangtail station • Maximum output: 500 cycles

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid Nledpfob A H R Esx Abwsd -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Nledpfx Aboy E Schswsd Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, Semi-automatic can seamer for round cans. Stainless steel version. Can diameter: 42–163 mm, height: 26–300 mm, material thickness: 0.35 mm. Currently equipped for 99 mm. Nledpjxn Nqlsfx Abwed

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Nsdpfxsdzqble Abwsld Good condition The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Nedpfjdzqaaex Abwold Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: new, Year of construction: 2025, Delivery every week - RELIABLE! Nsdpeb Hd Dlefx Abwold Are you looking for a folding machine? You expect quality, reliability. You can rely on competent advice and accurate, punctual delivery by the well-established Prod-Masz team. Direct from the manufacturer! Folding machine 2140T/0.8 incl. transport wheels Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - degree scale - Weight: about 150 kg - The rotary shears (max. cutting capacity 0.8 mm / steel) + 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. - transport wheels incl. Price: €1,350.00 Short delivery times! Ordered today - delivered next week! We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, On-time delivery, trustworthy equipment! Prod-Masz offers you first-class equipment. Convince yourself of our sheet metal bending machines. Folding machine 3.14m / 0.8mm Technical specifications: - maximum working width: 3140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 145 degrees - Folding beam thickness: 24 mm - The cut with the roller shear across the entire working width - lifting the top beam in three positions - Passage opening: 80 mm - Degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The roller shear (max. Cutting performance up to 0.8 mm / sheet steel) + 350 Euro - The machine complies with the CE guidelines and has a 12 month guarantee. Nlsdpfx Abocgmftowsd Price: € 2050.00 We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: new, Year of construction: 2025, The Prod-Masz company has had a good reputation for decades. We voluntarily face the strict and certified quality controls and offer you maximum quality, reliability and satisfaction! Of course we are happy to answer your questions personally and thank you for your interest in our company. Semi-automatic folding bench ZGH-3140 / 1.2mm: -ᐳ semi-automatic bending angle, is set on the encoder and potentiometer -ᐳ The machine works like a semi-automatic machine. After bending, the cheek returns to the starting position and the pressure cheek returns to the set height. It is set to 10 mm. -ᐳ This machine is suitable for series production the maximum working length 3140 mm the max. Sheet thickness for 1.2 mm (steel) the weight about 1400 kilograms of the hand machine lifting the top beam in three positions Bending beam: 30mm The max. clear width between the bars 100 mm Bending angle: 155 degrees Delivery date: every week L: 3.5m, W: 1.2m, H: 1.5m -ᐳ Adjustable support bars with scale optionally plus 1250 euros We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery). Nlsdpfjc Nxvkex Abwsd

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE Nedpfschwa Dox Abwold - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: new, Year of construction: 2026, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: Nsdpfeg In Azox Abweld - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: new, Year of construction: 2025, The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines. A professionally executed folding machine is the basis for years of use of the machine. That is why it is important to have a trustworthy company by your side. Folding machine 1400/2.0mm the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms The maximum clear width between the beams is 80 mm Accessories: degree scale, front depth stops, rear frame for holding the sheet metal, angle stop Delivery price: PLEASE ASK Price: 1300 euros Cash on delivery / bank transfer The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros welt press optional 75 euros The machine complies with CE guidelines and has a 12-month guarantee. Nodpfjb H Afdex Abwsld We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Folding bench ZGR-2640/0.8 Guarantee 12 MONTHS. Certificate CE 2640mm working length STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Manual folding machine plus 75 euros the weight 290 kg Nljdpfx Absb Ngb Nswjd Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 Nedscntk Rjpfx Abweld Our products are of the best quality and have Certificate CE. Plate Bending Machine ZGR-2000\0,8 Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Price: 1.050,00 Euro ( VAT excl. )

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000,8 incl. rotary slitters Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) The machine have certificate CE and 12 months of warranty Nlodsctui Repfx Abwjd Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.400,00 Euro ( VAT excl. ) We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: new, Year of construction: 2025, Bending machine with segments 1000/1.5mm This model SGR-1000mm is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, Njdpfx Abocvbu Aeweld - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability Technical specifications: - Max. Working width; 1000 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 235 kg - segmentback width 30,40,50,60,70 and 100 mm Price excl. shipping We provide invoices with 0% of tax Delivery in one week from the order date

Condition: new, Year of construction: 2025, Sheet metal folder 3140/0.8 PROD-MASZ company is one of the biggest manufacturer of Metal Plate Folding Machines in Europe. Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Technical details: max. working length: 3140 mm bending capacity: 0,8 mm (steel) Nedpecxu Ugjfx Abwjld 1,2 mm (aluminum, zinc and copper) bending angle: max. 145 degrees thickness of bending bar: 24 mm passage: 80 mm rotary shears +350 Euro Protractor Servomotors Angle stop for constant bending angle Weight: 400 kg Warrenty 12 months Certificate CE Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Nledjc Nxwhepfx Abwsd Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact!

Condition: new, Year of construction: 2025, Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm Njdpfec N Af Dox Abwold - Protractor - Weight: 600 kg - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Nledob Eg Nkopfx Abwod Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Condition: new, Year of construction: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without roller shears We are your partner when it comes to sheet metal working machines. Our claim to ourselves is to provide high-quality and reliable work in order to more than meet your requirements! We are only so successful because we put our heart and soul into our work! Technical specifications the maximum working length 1400 mm Nlsdpfx Abeb Hqa Eowed the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms lifting the top beam in three layers The maximum clear width between the beams is 80 mm Delivery throughout Germany 165 euros Price: 1450 euros incl. transport rollers Delivery time: every week Cash on delivery The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros Manual folding machine costs 75 euros as an option The machine complies with CE guidelines and has a 12-month guarantee. We issue the invoices with 0% (intra-community delivery) as well as with 23%. We are looking forward to your contact!

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Nljdodad Adepfx Abwod Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2026, Timely delivery, trustworthy equipment ! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Prod-Masz offers you first class equipment. Convince yourself of our sheet metal bending machines. Nsdpfx Abecgaa Hswold Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Price: 1.050 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with 23% of VAT.

Condition: new, Year of construction: 2025, The folding bench ZGR-2000 / 0.8 is equipped with all accessories and offers a really unique price-performance ratio. front and rear stop, degree scale and bending angle width limiter are part of the standard scope of delivery of this lightweight folding bench. Sufficiently sufficient for processing copper, zinc and aluminum in the usual thicknesses and perfect for everyday use on the construction site or workshop. Folding bench 2140 / 0.8 the maximum working length is 2140 mm the max. Thickness of the steel sheet for 0.8 mm Bending beam 15 mm Nsdpocgbnwefx Abwsld Roller shear + 350 Euro Hand folding machine + 75 Euro the weight about 180 kilograms of the hand machine cut with scissors along the entire working length lifting the upper beam in three positions The max. clear width between the beams 80 mm Bending angle 145 degrees We are looking forward to your contact!