Used Tunnel Oven for sale (2,023)

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details Hfsdoz Sp Anspfx Aiqen - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 13137, Capacity: approx. 50-56 kg/h (depending on the dough, filling, etc.) Overhaul year: 2026 – new electronics, housings, insulation, gas reducer, all bearings + motors are new or refurbished. Model: EWB 2/2 Hfsdpfx Aszwmz Hjiqen Two dough belts. Set including a dough tank and pumps – stepless speed control via a frequency inverter. Power source: CNG/LPG 50 Hz, power: 5.3 kW

Condition: used, all stainless steel completely isolated infeed conveyor outfeed conveyor belt width ± 1.350 mm 3 tiers from 6.000 mm adjustable speed Hfodpfx Aiez Rnzmoqon suitable for thermal oil heating

Condition: used, Year of construction: 2008, machine/vehicle number: 0007-2008, 4 chambers with dry steam, glass doors, suitable for this Number available (price per tank): 1 electrical power supply kW: 5 Hjdpoz Suu Asfx Aiqefn Sleevetunnel chambers: 4 Strom / Volt: 400

Year of construction: 2013, condition: good (used), Steam convection oven, Rationa SCC WE 202 convection oven The unit is in like-new condition. Hedpfx Aioz E Dfvsqjfn * For 40 GN trays * 65.5 kW * Steam cooking mode from 30°C to 130°C * Regeneration function * Convection / dry heat: temperature range between 30°C and 300°C, 0–100% maximum humidity. * Probe * Automatic cleaning with tablets

Condition: good (used), Year of construction: 2006, functionality: fully functional, FORMCCOK CONTACT COOKER Hfodpfst Sg Txsx Aiqon MODEL: CC618 PERFECT WORKING CONDITION

Condition: used, functionality: fully functional, Year of construction: 2010, total length: 3,590 mm, total width: 1,432 mm, total height: 1,478 mm, overall weight: 870 kg, We offer this ready-to-use Rehm VXS basic 2100 (Type 422) reflow oven for SMT/re-flow soldering, manufactured in 2010. - Manufactured in 02/2010, put into operation on April 16, 2010 - Special shortened version, 7 zones: 4x preheating, 2x PEAK, 1x cooling - Operated in a single-shift mode from 04/2010 to 07/2021 (approx. 11 years), has been out of operation since then - Regularly serviced and cleaned; only one service intervention during the entire operating period (repair of the transport trolley, 06/2016) - Dimensions: 3,590 × 1,432 × 1,478 mm (L × W × H, ±50 mm) - Purchased as new directly from Rehm (original purchase price approx. 1.43 million CZK) - Data sheet and operating records available for viewing/download - Inspection and collection: Bonnel Technologie s.r.o., Wolkerova 2304/38, Cheb, Czech Republic (near the Bavarian border) Hsdpfxjz Hnz Ro Aiqefn If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit Hsdpfx Aiez Ihiksqefn in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Hodpfxsz Hw D Uj Aiqjfn

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, temperature: 1,300 °C, number of chambers: 1, control type: PLC-controlled, fuel type: gas, Equipment: documentation/manual, No. 1 Industrial car furnace / USED, year 1999, for heat treatments on metals (tempering, annealing, normalizing, stress relieving, preheating, sintering), and for firing ceramics and porcelain. Type: STC2400 Hfedpfx Aszxxm Roiqon Maximum temperature: 1300°C No. 1 motorized car No. 1 flap door Thermal power: 240,000 kcal/h Power supply: 400 V 3-phase + neutral + ground, 50 Hz Control panel type: ATR 313 No. 1 heat exchanger made of stainless steel Machine sold as is, where is.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Hfodpszylxcefx Aiqsn Gas burner with a power output of 125-390 kW.

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 16238, total length: 12,600 mm, total height: 1,500 mm, total width: 1,475 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 80 mm, product length (min.): 80 mm, product length (max.): 200,000 mm, product width (max.): 450 mm, product width (min.): 14 mm, input voltage: 400,230 V, working height: 900 mm, overall weight: 1,900 kg, input frequency: 50 Hz, space requirement width: 3,000 mm, This machine was bought in 2015 and has only been installed, calibrated and tested. We have never been in commercial use. Has only been stored in our room temperated warehouse. We planned to use it for own production, but not all plans are realized. So this is a brand new packaging machine with roller conveyers and heat tunnel. All documentation is avaliable. The machine is located in Norway and can be inspected and tested here. Hfodpfxezzybhe Aiqjn We paid € 70.000,- for this machin inclusive heat tunnel and roller conveyors in 2015

Condition: good (used), E Shrink Packaging LB-728 + LB-201 Angle Sealer with Shrink Tunnel This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply place the goods to be packaged on the conveyor belt, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 565x460mm Tunnel entry dimensions: 370x230mm Weight: 550kg Power supply: 380V Installed power: 14 kW (total peak power, continuous operation max. 5 kW) Hfsdpfx Aisz R Iqzeqjn Capacity: approx. 1560 pcs/h

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar Hfsdpfoywuzwsx Aiqen - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Italdibipack Mecpack FS + FornoTouch 5525EV Sealer with Shrink Tunnel Made in Italy. This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the shrink tunnel, and the machine does the rest. Hsdsz R Iq Iepfx Aiqefn Machine parameters are set from the control panel. Sealer dimensions: 600 x 500 mm Tunnel entry dimensions: 550 x 250 mm Weight: 770 kg Power supply: 380V Installed power: – sealer 2.5 kW, – tunnel 7 kW. Capacity: approx. 2,400 pcs/h Includes a short roller conveyor for product removal.

Condition: good (used), DEM GP4520 APM Angle Sealer with Shrink Tunnel Made in France. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Hedpfjz R Iqnjx Aiqjfn Automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel, including sealing time, material feed time, sealer open time, conveyor belt speed, etc. Sealer dimensions: 470 x 555 mm Weight: 400 kg Power supply: 380V Installed power: 8 kW Capacity: 900 pcs/h

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Hjdswi Ry Hepfx Aiqofn Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Hodpfxoz Rn Due Aiqefn

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 12 h, power: 30 kW (40.79 HP), input voltage: 380 V, temperature: 200 °C, inner dimension length: 1,200 mm, inner dimension width: 1,700 mm, inner dimension height: 2,300 mm, total length: 1,500 mm, total width: 2,200 mm, total height: 2,800 mm, overall weight: 400 kg, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, Professional Composite Curing Oven – Romer SL Hedsy Tvvzopfx Aiqsfn Internal Dimensions: 1200 × 1700 × 2300 mm High-performance industrial composite curing oven from the respected Polish manufacturer Romer, designed for advanced composite manufacturing processes including carbon fiber prepreg curing, drying, post-curing, and thermal processing applications. This electric batch oven is ideal for aerospace, automotive, marine, motorsport, and industrial composite production environments where accurate and stable temperature control is essential. Constructed with a heavy-duty steel frame, stainless steel internal chamber panels, and durable powder-coated external finish, the oven is built for continuous industrial operation and long-term reliability. The smart control system delivers precise temperature management, efficient power consumption, and controlled heating/cooling performance. The integrated air circulation and ventilation system ensures uniform heat distribution throughout the chamber for consistent curing quality. Key Features: • Maximum operating temperature: 200°C • Internal dimensions: 1300 × 1800 × 2000 mm • Designed for composite prepreg curing applications • Heavy-duty industrial construction • Stainless steel internal chamber • High-efficiency hot air circulation system • Accurate programmable temperature control • Multi-stage curing program capability • Controlled heating and cooling cycles • Uniform temperature distribution • 8 internal vacuum inlets installed inside the chamber • Vacuum pump included in the sale • Suitable for carbon fiber, fiberglass, prepreg, tooling, and composite components Applications: • Carbon fiber prepreg curing • Composite part manufacturing • Aerospace and motorsport components • Marine composite production • Tooling and mold post-curing • Drying and thermal treatment processes • Research & development and prototype manufacturing The oven is in very good working condition and can be inspected and tested on-site.

Condition: used, Binder Safety Vacuum Drying Oven Binder VDL 115 Safety Vacuum Drying Oven ATEX version for potentially explosive areas For sale is a used safety vacuum drying oven from the manufacturer BINDER GmbH. The vacuum drying oven is suitable for gentle drying, degassing, and conditioning of temperature-sensitive materials under vacuum, as well as for applications with flammable solvents. Technical data Manufacturer: BINDER GmbH Type: VDL 115 Device type: Safety vacuum drying oven Internal volume: approx. 115 liters Internal dimensions: approx. 506 × 460 × 506 mm (W × D × H) External dimensions: approx. 743 × 581 × 942 mm (W × D × H) Weight: approx. 158 kg Temperature range: approx. +9 °C above ambient to +110 °C Ultimate vacuum: up to approx. 0.01 mbar Electronic temperature and pressure control Rated temperature: 200 °C Rated power: 1.90 kW Mains connection: 230 V / 1N~ Rated current: 8.3 A Hfodpfoznbm Ejx Aiqon Frequency: 50–60 Hz Protection class: IP54 Temperature protection: DIN 12880 Class 2.0 Item number: 9030-0012 Equipment ATEX version Electronic temperature control Vacuum indicator Digital display Viewing window in the door Stainless steel interior Several insertion levels Connection for vacuum Connection for inert gas Original brief operating instructions on the device Application areas Chemical laboratories Pharmaceutical laboratories Research and development Quality control Material testing Gentle vacuum drying Degassing and conditioning Condition Used Optical condition as shown in the pictures Scope of supply 1x Binder VDL 115 Safety Vacuum Drying Oven Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2020, condition: excellent (used), BINDER FED 400 – 400 L / 300°C Laboratory Dryer – Year 2020 – Fully Functional For sale: a professional BINDER FED 400 laboratory dryer from 2020, manufactured by the German company BINDER GmbH. The unit is in very good technical and visual condition, is fully functional, and ready for further use. The BINDER FED 400 is a high-quality laboratory dryer with forced air circulation, designed for drying, heat treatment, thermal processing, temperature testing, and laboratory and industrial applications. Technical Data * Manufacturer: BINDER GmbH – Germany * Model: FED 400 * Year of Manufacture: 2020 * Chamber Volume: 400 liters * Temperature Range: from 5°C above ambient temperature to +300°C * Circulation System: forced air circulation with adjustable fan speed * Heating Technology: APT.line™ * Control: electronic temperature controller with timer functions * Rated Power: 3.4 kW * Power Supply: 400 V, 50/60 Hz (European version) * Chamber Material: stainless steel * Maximum Chamber Load: 90 kg * Maximum Load per Shelf: 35 kg * Device Weight: approximately 145 kg Device Dimensions External Dimensions (width × height × depth): * 1235 × 1025 × 765 mm Internal Chamber Dimensions (width × height × depth): * 1000 × 800 × 510 mm External dimensions do not include additional components and connections. Key Advantages * Large working chamber with a volume of 400 liters * Maximum operating temperature up to 300°C * Precise temperature control * Forced air circulation ensuring uniform heat distribution Hedjz Si U Sjpfx Aiqefn * APT.line™ technology providing uniform thermal conditions * Electronic controller with timer functions * Adjustable fan speed * Overheating protection * Robust construction from a German manufacturer * Interior made of stainless steel

Condition: used, Thermo Scientific   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Hfsdpjziy D Esfx Aiqsn Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, DIBAS 64S and 64L Technical specifications 64S Capacity: 4/5 trays 600 x 400 mm Tray distance: 100 / 80 mm Dimensions (automatic door): 930 x 1010 x 700 mm Dimensions (manual door): 930 x 1055 x 700 mm Voltage: 400 V 3N/PE Frequency: 50 Hz Current: 13.9 A Power: 9.6 kW Weight: 136 / 143 kg (cascade passive) Weight: 134 / 141 kg (cascade active) Weight: 119 / 126 kg (pipe steaming) Steam type: cascade (optional), pipe steaming (standard/optional) Water pressure: 150 – 600 kPa Technical specifications 64L Capacity: 8/10 trays 600 x 400 mm Tray distance: 100 / 80 mm Dimensions (automatic door): 930 x 1010 x 1100 mm Dimensions (manual door): 930 x 1055 x 1100 mm Voltage: 400 V 3N/PE Frequency: 50 Hz Current: 27.5 A Power: 19 kW Weight: 205 / 212 kg (cascade passive) Weight: 200 / 207 kg (cascade active) Weight: 170 / 177 kg (pipe steaming) Steam type: cascade (optional), pipe steaming (standard/optional) Water pressure: 150 – 600 kPa Hfsdpfx Aisy Avpmsqen

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Year of manufacture (deck oven): 2009 Year of manufacture (rack oven): 2011 EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) Hsdpfjzxp Dyjx Aiqofn - HK 200 heating boiler - Trolleys for rack ovens The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2009, 567 USED DEBAG Helios 8060 C electric, deck, shop oven. EXTERNAL DIMENSIONS (in cm): - W: 92 - L: 147 - H: 204 INTERNAL DIMENSIONS OF BAKING CHAMBER (in cm): - W: 60 - L: 80 - H: 16 TECHNICAL DATA: - year of production: 2009 - power supply: 400V 50Hz - power per chamber: 6.8 kW EQUIPMENT: - hood Hjdpsz Ezcfofx Aiqsfn - proofing chamber Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.