Used Transformer Station for sale (6,891)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Lhjdpfx Aomck Rysb Usn Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Year of construction: 2010, overall weight: 30 kg, System for argon/gas Lsdpfsw Sdk Nex Ab Uohn External dimensions: Width: 500 mm Depth: 500 mm Height: 600 mm Weight: approx. 30 kg Condition: good, second-hand

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2025, Fat fryer Jufeba WW - S 20 Full reversible basket for max. 60 pieces Lifting device, manual removal device 1 fermentation trolley with 8 aluminum tipping trays LED temperature controller with safety thermostat Steam cover, drip tray on the left Fat baking station with 1 dipping basket Output approx. 600 pieces/hour. Stainless steel version, mobile Ljdpfx Absin D U Do Ushn Connection 400V, 9 kW, 32A-CEE plug Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device cleaned and checked with 6 months warranty Come and take a look at our large warehouse of bakery machines

Year of construction: 1994, condition: ready for operation (used), Nominal load: 1250kVA, weight: 3.37t. Lhodpfxem H Uqro Ab Uon

Condition: good (used), Year of construction: 1991, transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Lhedpfx Ajru Ra Ijb Usn -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo type plate -Dimensions: 1000/570/H760 mm -Weight: 388 kg

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 Lhodpshgimdsfx Ab Usn four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting.

Condition: used, -Dimensions: 1100x650x865 mm -Tank size: 500 mm diameter, 150 mm depth Ljdsw N Scbspfx Ab Ushn -Serial number: C2171910002 -Manufacturing date: 10/2019 -Temperature: -30°C/-35°C -Voltage: 230V -Frequency: 50Hz -Ice production: 25 L/h Nsy Tdxew N Scbsugoda -Weight: 90 kg

Condition: as good as new (ex-display), Year of construction: 2018, functionality: unexamined, total width: 40,000 mm, total length: 9,000 mm, total height: 7,000 mm, type of input current: three-phase, IBC unloading and cip station EX with fume ventilation Ljdpsra Dlpofx Ab Ushn 5 ibc conatiners with driptray 2 product pumps completely 316 stainless never used welding documentation registration available simatic panel

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette shaft Ø: 30 mm Lhsdpfsh Tm Rlsx Ab Uon strip width: 200 mm strip thickness: 1 mm

Year of construction: 2019, condition: ready for operation (used), Used for autoclave sterilisation, an on-site inspection is possible. Ledpfxsq Rfl No Ab Uohn

Year of construction: 2016, condition: used, functionality: fully functional, The Vetaphone Corona Treatment System is used to boost surface energy before winding on film extruders, or prior to a laminating, printing, or coating process, in order to ensure good adhesion and high quality on the final product. Station VE1C-A(C4) 1920 QC, generator iCorona2-6kW, remote control TF415, ventilator RD62, transformer iHP200 6kW, 4 ceramic electrodes (not included). Lhedpfx Ajw I D Uyjb Ujn

Condition: used, Year of construction: 1997, functionality: fully functional, 2500 kVA cast resin transformer, manufacturer Veneta, year of manufacture 1997, 20 kV ± 2.5% / 400 V, with rolling wheels, HV/LV connections on top, Dyn5, 6.4% uk. Ledpfxew I A Dts Ab Uehn

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers Lhjdpfxjibx S Ns Ab Usn - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: excellent (used), Filling machine Pos. number: LTC00004923 Make: King Type: automatic 6 head inline filling machine Model: KT 340 / ILKT Ljdpfx Abjhbrxxs Ujhn Serial number: 6-2117701 / 214904 Frame: stainless steel Dimensions: L x W x H = 2.750 x 1.600 x 2.000 mm Weight: 700 Kg Capacity: up to 4.000 fillings per hour (depending on filling volume and product) with 1 liter you get about 1.200 fillings per hour. Power supply: 380 Volt - 50 Hz - 3.0 kW Features: volume tank machine fills with pulses, so a wide filling volume range fully adjustable with / without bottom filling 1-6 cups separately adjustable Note: machine in perfect condition

Condition: new, With filters 20 pieces 2 motors 15 kW Capacity 36,000 m³.h 400 V x 3 phases x 50 hrs 3 fan speeds Approximate dimensions: 5 m 3 m x 2 m Ledpevu Sqlefx Ab Ushn Serial number: 20-1-267 Year of manufacture: 2020

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Ledpfx Aeh Akm Tsb Uehn

Condition: used, Year of construction: 1979, 31.5 MV power transformer, 110 kV / 10.5 kV with tap changer (19 steps), with expander, Buchholz relay, dehumidifier, switching group Yy0, Lhjdpfx Aberk Nrte Uon transformer book available

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Ljdpfxeh Dpxho Ab Uehn Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2015, Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible. Lodou E T Tmopfx Ab Uohn

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Lhjdpfxstwwm Us Ab Ujn

Year of construction: 2018, condition: ready for operation (used), A hand sanding station from Aurtec is available. Sanding belt width: 150mm, belt length: 3500mm, belt thickness: 4mm, speed: 500rpm. Documentation available. On-site inspection is possible. Lsdov Np U Depfx Ab Ushn

Condition: ready for operation (used), Year of construction: 2019, Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible. Ljdpor A Eibefx Ab Ujhn

Condition: ready for operation (used), Year of construction: 2010, Nominal power: 160kVA, including NH isolator with capacitors, GBE T119 DIN monitoring, 5 medium-voltage switches and 1 measuring transformer cabinet with instrument transformer. weight: 1.06t. On-site inspection is possible. Lodpfx Asrck D Hob Uohn

Year of construction: 2008, condition: ready for operation (used), A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible. Lhsdpfx Ajvvwn Sob Ujn

Condition: ready for operation (used), Year of construction: 2024, Two identical and unused medium-voltage transformers for substations are available. Rated power: 63MVA, high voltage: 115kV, switching group: YNyn0 (d), cooling type: ONAN/ONAF, insulating fluid: Shell Diala S4 ZY-I, PCB content: below 1ppm. Machine dimensions X/Y/Z: approx. 7200mm/3600mm/4000mm, total weight: approx. 86000kg. The machines were never connected. Documentation available. On-site inspection is possible. Individual sale possible. Lhedpfx Aovt Ayuob Uon