Used Crushed for sale (884)

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Hfodpfx Aoz Rqcmsg Ejn Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row Hfedpfx Aszl E N Eeg Esn The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft pre-shredder / Rotary shear – Metal shredder – 264 kW – 1,930 hours Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: __2021__ Hours: 1,930 h Condition: Used Technical specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Blades: Bolted (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation Weight: approx. 27,500 kg Applications / materials Light scrap metal Steel sheets Drums / cans Hedsx I Dc Espfx Ag Eofn Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Machine is functional Blades need to be replaced Maintenance records available Inspection and testing possible on site Terms of sale & price 🔧 Sold as is (work required) – Thread repair and blade holder surfacing, complete blade set replacement Availability: Immediate Price: €250,000 (excluding VAT)

Condition: used, Year of construction: 1995, functionality: fully functional, total width: 600 mm, total length: 18,000 mm, overall weight: 400 kg, input voltage: 380 V, Crusher for various products. Hfjdpfxsz N Immo Ag Ejn

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), We sell the shredder as a set including a pit conveyor, shredder, and discharge conveyor. The Vecoplan universal shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power output of 55 kW, is equipped with 60 cutting heads measuring 60x60 mm. A turbo coupling facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine, including the control panel, is offered for sale. The hopper and extraction hood are included. Spare parts are included in the price of the shredder. Hfsdpfjzmzdujx Ag Eon The machine was in operation at an R&D center in Israel. Now that the company is operating a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging for pallet transport.

Condition: used, functionality: unexamined, Year of construction: 1963, Used double-shaft hammer crusher KRUPP DHB 1604, feed opening approx. 1600 x 1480 mm, capacity up to 400-500 t/h, final grain size 0-30 mm, max. feed size 1000 x 800 x 500 mm. Particularly suitable for the cement industry, for processing moist materials such as limestone, clay, marl. Weight approx. 60 t. Hedpfxoxcxrze Ag Eofn

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,240 h, Terex-Pegson 1100×800 (Pegson 1180) Year: 2007 Hours: 7,240 h Well-maintained Terex-Pegson 1100×800 jaw crusher, also known as Pegson 1180. The machine has been operated by a single owner since it was new and remains in very good working condition. Technical specifications: Hsdpezdq Nhjfx Ag Esfn Feed opening: 1100 × 800 mm Hydraulic CSS adjustment: 90–150 mm CAT C13 engine Hopper capacity: 9.1 m³ Grizzly feeder Side conveyor Operating weight: 56,000 kg Additional equipment: Spare jaw plates included Main advantages: Single owner since new Very good technical condition Reliable CAT C13 engine Large feed opening for high productivity Suitable for quarrying, recycling, and aggregate production Fast access to spare parts Financing available. Export documentation can be arranged. Machine available immediately. Inspection possible in Poland. Worldwide delivery available.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Used Parker 0745 Hooklift Jaw Crusher Year 1997 CAT Engine (Reconditioned) Hfedpjz Nllgofx Ag Eon New Main Hydraulic Pump 700 x 450 Jaw Opening Jaw Liners 80 - 90% Good Grizzly In Very Good Condition Very Nice Unit. Ready To Go Straight To Work.

Condition: used, Year of construction: 2010, Attachment suited for: Construction machines Availability: in stock Hfedpfjz Ryn Esx Ag Ejn

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each Hfodpfx Aszl E Stjg Eon The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Hjdpozv U Ifjfx Ag Eefn Discharge conveyor belt recently replaced.

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Hsdow N Hk Hspfx Ag Eofn

Condition: good (used), functionality: unexamined, Year of construction: 2000, Used impact crusher for the production of crushed rock and sand, feed size 20-100 mm, capacity approximately 40 cubic meters per hour, produces crushed rock and sand (approximately 50%), vibrating feeder at the crusher, 90 kW electric motor, steel substructure, discharge chute, V-belt guard. Wear parts are approximately 80% in good condition. Hsdpfezwt Uaox Ag Eefn

Condition: not inspected (used), Year of construction: 2008, functionality: limited functionality, Model/Type: Erdwich M480/3-1000 Serial No.: 1896 Year of construction: 2008 Running Hours: unknown Warranty: Partially functional; no warranty or guarantee Availability: approx. 4-8 weeks after receipt of down payment Details: Hfedpfoylhbfox Ag Ejn + Cutting unit, hopper, frame, and control unit + 3-shaft shredder + 2x 22 kW drive motors + Chip conveyor

Condition: excellent (used), functionality: fully functional, fuel type: electric, overall weight: 22,000 kg, Year of construction: 2026, machine/vehicle number: Komplettanlage, The complete crushing and screening system consists of a platform, cartridge filters, electrical switchgear and control system, an inclined bucket elevator, a screening trough 900 x 3600, a BHS impact bucket elevator VBP 0806, and a feed hopper with a capacity of 6 cubic meters, including a conveying trough and a protective cover. Hedsz Rixaepfx Ag Ejfn The system was regularly maintained until it was shut down and is in very good condition. The system is currently still assembled. See the images.

Condition: good (used), functionality: fully functional, power: 110 kW (149.56 HP), machine/vehicle number: B-01526-120, for sale as parts or as a complete installation Hsdpfx Agjxhgywe Eefn feed hopper conveyor belt Andrin eddy-current separator extraction control cabinet etc.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Roll cutter RGS50 - Used machine - Hfedpfx Agoz E Hnyj Ejn Good condition - ready for immediate use Partially refurbished: Hydraulic hoses replaced Hydraulic oil changed Safety valves retrofitted Control system refurbished Blade holder renewed Knives renewed Knife length 2500mm Max. opening 1600mm V-table design Drive power: 15kW with soft start Double pump with 2-stage cutting speed Two-hand operation Cable pull emergency stop on both sides Base frame and feed table available

Condition: used, Year of construction: 2003, operating hours: 5,318 h, 2003 | Terex Pegson 428 Track Feeder Impact | Used Crusher | 5318 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 75000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Hfedpfxjz I Svze Ag Eon 80 inspection points 57 approved ✅ 23 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine has not been running continuously for a few years, but it does undertake a few small campaigns each year. It has recently worked and is ready to work. It has been parked in the sun (no shelter) hence the oxidation and cracked hoses. We were not able to see the main and magnetic conveyors in operation during the inspection. Please look at all the photos and videos for more details. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40524 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: PIDXH320KOMA70990, universal excavator in excellent condition Hjdpsyint Nofx Ag Esfn

Condition: good (used), functionality: fully functional, power: 310 kW (421.48 HP), fuel type: diesel, overall weight: 33,000 kg, Year of construction: 2020, operating hours: 2,411 h, Transport weight: 32,000 kg Discharge width: 2,440 mm Discharge height: 2,700 mm Discharge hopper volume: 5 m³ Transport dimensions: 16,800 x 3,000 x 3,400 mm (L x W x H) Engine manufacturer: Caterpillar C9.3B Engine power: 310 kW Weighing system: Pfreundt KW50 with printer Discharge belt width: 800 mm Hsdpfx Aozkg Hpeg Eefn Maximum discharge size: 200 mm Cone crusher: Nordberg HP200e

Condition: used, Maschinenfabrik Liezen Industrial Impact Crusher, Blow Bar Crusher, 22 kW, Used machine Hjdpfxsz D Hb Ro Ag Esfn Manufacturer: Maschinenfabrik Liezen G.m.b.H. Type: CI 85-60 F Serial number (Masch. Nr.): 92 117 20 Electric motor manufacturer, power: Siemens, 22 kW (1460 RPM, 400V) Condition: Used, industrial execution Overall dimensions(crusher): 2300 x 1600 x 2000 mm Installation dimensions: 3430 x 1540 x 1900 mm Motor dimensions: 1000 x 1000 x 620 mm Feed opening size: 620 x 320 mm Technical and operating parameters: Crusher rotor design: 3 pcs impact bars (blow bars) Drive: 22 kW Siemens three-phase electric motor (141 kg) Execution: Heavy-duty construction with wear-resistant internal lining plates

Condition: used, Field of application: Mining Plant Model PTK156 Drive Hybrid Motor Volvo-Cummins-Perkins Tier 3-4 Hfsdpox Av Utefx Ag Eon Top Deck Size 5,000 x 1,500 mm Bottom Deck Size 5000 x 1,400 mm Weight: 34,500 kg Transport Dimensions (mm) 16,500 x 3,250 x 3,400 Operation Dimensions (mm) 17,400 x 14,400 x 4,450

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), functionality: fully functional, Mag Impact 2400 VSI (Vertical Shaft Impact) crusher Year of manufacture: 2008 Only 3,200 operating hours 250 kW electric motor Maximum feed material size: 130 mm Rotor tip speed: 50 m/s Output product: 0–16 mm (with max. 8/12 mm) Capacity: 250–300 t/h (depending on material and target fraction) Includes support frame and complete electrical system BELT CONVEYORS NOT INCLUDED Includes two additional anvil rings, one of which is designed for double reinforced anvils Hedoz H Rd Ujpfx Ag Eefn Total assembly weight: 24,000 kg Crusher is 100% functional and ready for operation This VSI crusher offers the highest material reduction ratio for a 0–80 mm feed; the 0–4 mm fraction yield when processing limestone is nearly 50%! An ideal machine for producing fine aggregates (dust/powder) Full technical documentation and a certificate of origin are provided with the machine We also offer the widest range of spare parts in Poland for this type of machine (available in our other listings) as well as comprehensive post-warranty service!

Condition: used, functionality: not functional, power: 29.42 kW (40.00 HP), Year of construction: 1976, Used Kue-Ken jaw crusher 105. For details, see photos. Operating manual available. Price ex works, excl. VAT. The left and right bearings need to be replaced. Hedpfx Agex H Nwxs Esfn

Condition: new, Year of construction: 2026, total height: 3,100 mm, total width: 1,600 mm, total length: 1,700 mm, overall weight: 2,500 kg, PC800 Plastic Crusher The PC800 industrial plastic crusher is designed for size reduction of HDPE, LDPE and PP film waste. It can be used as a standalone machine or integrated into plastic washing and recycling lines. Crushing can be performed with water supplied directly into the crushing chamber, allowing the material to be crushed and pre-washed at the same time. The bearing units are located outside the crushing chamber, protecting the bearings from direct contact with water and allowing the crusher to be used for wet crushing applications. Hydraulic Hopper Opening System: The crusher is equipped with a hydraulic power unit and two hydraulic cylinders for lifting and lowering the feed hopper, providing convenient access to the crushing chamber for cleaning, maintenance and knife replacement. Material Feeding Conveyor: The crusher is equipped with a belt conveyor for feeding material directly into the feed hopper, providing continuous and convenient material loading Crushed Material Collection Hopper: The system is equipped with an 800-liter collection hopper for crushed material, mounted on a robust steel support frame Technical Specifications • Capacity: 250–500 kg/h depending on the material • Main Motor Power: 37 kW • Hydraulic System: Hydraulic power unit with 2 cylinders for lifting and lowering the feed hopper • Hydraulic Power Unit Motor: 1.5 kW • Cyclon power: 5.5 kW • Rotor Diameter: 500 mm • Rotor width: 800 mm • Crushing room dimension: 620 × 840 mm • Rotating Knives: 10 pcs • Fixed Knives: 4 pcs • Knife Material: SKD11 • Water Inlet Diameter: 25 mm • Screens Included: 28 mm • Machine Material: S235 steel • Crusher Body Thickness: 25 mm • Dimensions (L × W × H): 1700 × 1600 × 3100 mm • Crushing Type: Dry or wet crushing with water supply • Material Feeding: Belt conveyor • Conveyor Motor Power: 1.5 kW • Conveyor Length: 4000 mm • Belt Width: 600 mm • Conveyor Capacity: up to 800 kg/h • Speed Control: Manual Hfedpfoz I Tb Sex Ag Esn • Conveyor Height: Adjustable • Belt Material: PVC • Total weight: 2500 kg • Collection Hopper Capacity: 800 L stainless steel • Application: Collection of crushed material • Support Structure: Steel frame Applications: HDPE, LDPE and PP film, packaging film and other flexible plastic waste