Used Test bench for sale (24)

Condition: used, 18236-140*2, B56Hx140/1P-SC-Y 4x2 1/2"(54), Swep, brazed plate heat exchanger Model: 18236-140*2 Type: B56Hx140/1P-SC-Y 4x2 1/2 Cjlethfnveq D Ei Aogt Condition: Used

Condition: used, Year of construction: 1998, Functionality: fully functional, Wenzel alignment station for the Erowa Charmilles Robofil 2030SI Cgjlq Djwdmv He Ei Aet Incl. base cabinet

Condition: good (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 35018, Equipment: documentation/manual, We are selling our Jenoptik Hommel T8000 surface roughness measuring device. The device has been used in the measurement laboratory, regularly serviced, and calibrated. It is in very good condition, fully functional, and ready for use. Technical details are available upon request, and the measuring device can be inspected on-site. Colq D Eiswcwgyj Aegt

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz Cgjlq Dodz Srbj Ei Aet 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Year of construction: 2012, Condition: like new (used), Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Cgjlq Dsh Rvh Ss Ei Ajt Detection of potential problems during development Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Year 2012 Weight 1400 kg Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1977, A Klingelnberg single flank gear testing machine for cylindrical and bevel gears is available. Center distance for cylindrical gears: 900mm, test wheel weight: 1000kg, bevel gear diameter: 425mm, bevel pinion mounting dimension: 800mm, bevel gear outer mounting dimension: 440mm, mounting bore diameter: 90mm, mounting bore depth: 400mm, max. radial load: 50kg, angle adjustment: 45°-135°. Machine dimensions X/Y/Z: approx. 1600mm/2400mm/1600mm, weight: approx. 1600kg. One electrical component of the circuit board is defective. Documentation available. On-site inspection is possible. Cgjlq D Eiovnubme Aot

Condition: used, IR50, JenLas® disk IR 50, JENOPTIK disk laser Model: IR50 Type: JenLas® disk IR50 Cgslq D Eisra D Dro Aot Condition: Used

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 Cgelsbbgcxsq D Ei Ajt table height at zero position: 146 mm Space requirement: 250 x 290 mm Weight: 41 kg

Condition: excellent (used), Year of construction: 2000, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device is in very good condition and ready for immediate use with many additional attachments Year of manufacture: 2000 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading and/or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website Cgjlq D Eevkxa Esi Aot

Condition: used, total width: 1,250 mm, total length: 2,500 mm, total height: 250 mm, overall weight: 800 kg, space requirement height: 1,000 mm, Measuring table, granite, on adjustable feet, last inspection 9.2000, very good condition Colq D Eietvmdno Aogt

Condition: excellent (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Cgelqjg Sxmfo D Ei Aet Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1998, Condition: excellent (used), Waste oil test bench Csljh Rnq Tsq D Ei Asgt Make SWEP Model B 5x10 dimensions LxWxH 115x105x115 cm Weight 132 kg

Condition: used, Test panel, test station, measuring station, test device, measuring device, tester for HV, PE, IS measurement ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 PE/IS/HV SCT 42 / 91-3J.3 is used to measure dielectric strength, insulation insulation resistance and the protective conductor voltage drop acc. Cgolq D Eiof Axn Aj Ajt VDE0113 and IEC regulations according to EN60204, Part 1. Serial no.: 0064016 Year of manufacture 2004 Rated voltage 230 VAC Rated frequency 50 Hz Rated current 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The 90-1V device supplies a highly stable DC voltage with low ripple. One output pole carries high voltage, the other output pole is close to earth and can be to a maximum potential of 300 V. Device no.: 90-7WZ006 Year of manufacture 2000 Mains voltage 230 VAC Mains frequency 50 Hz Rated current 1 A Interference suppression according to VDE 0871 Nominal power 14 Watt Output voltage 0 - 6.0 kV / DC Output current 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial no.: 0097588 Year of manufacture 2009 Rated voltage 230 VAC Rated frequency 49 - 61 Hz Rated current 1 A Number of test points: 5 - Device unit compact on trolley - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1380 mm total weight: 100 kg good condition Many other ELABO devices under stock numbers 57819, 57820 and 57821

Condition: used, Functionality: fully functional, total width: 700 mm, total length: 1,400 mm, total height: 500 mm, overall weight: 2,000 kg, space requirement width: 700 mm, space requirement length: 1,400 mm, space requirement height: 850 mm, Attention only measuring plate from CMM utilization with table frame Cslqjvfn Ihj D Ei Aegt

Condition: excellent (used), Year of construction: 2017, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device was used for housing surface testing as the type describes and is in good to very good condition Year of manufacture: 2017 Weight: 2,500 kg Colemfty Hjq D Ei Aegt The offer includes the components shown as well as computers and software Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 2000, Test panel for the Elektra Thailfingen electrical workshop PST 3.1 - SIA - B Cslou Aw Tlsq D Ei Aegt Test panel without base frame W 800 mm x H 800 mm x 200 mm, height with base frame base frame 1500 mm The year of construction is estimated

Condition: excellent (used), Granite Measuring Plate Vibration Insulated  Cgsljh Ri Auoq D Ei Ast Measuring plate made of grey-black granite  as a base for assembly, control and laboratory purposes Outer edges visibly ground Stainless steel threaded and fitting holes Base with vibration insulation (membrane air spring insulators) Panel size 2000 x 1450 x 400 mm (WxDxH) Weight approx. 4000 kg Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Test panel, test station, measuring station, test device, measuring device, tester for HV, PE, IS measurement ELABO type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure dielectric strength, insulation insulation resistance and the protective conductor voltage drop acc. VDE0113 and IEC regulations in accordance with EN60204, Part 1. Serial no.: 0000045431 Year of manufacture 2003 Rated voltage 230 VAC Rated frequency 50 Hz Cgslqsd Dc Uno D Ei Ajt Rated current 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device supplies a highly stable DC voltage with low ripple. One output pole carries high voltage, the other output pole is close to earth and can be to a maximum potential of 300 V. Serial no.: 0082152 Year of manufacture 2005 Mains voltage 230 VAC Mains frequency 50 Hz Rated current 1 A Interference suppression according to VDE 0871 Rated power 14 Watt Output voltage 0 - 6.0 kV / DC Output current 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage 230 VAC Rated frequency 49 - 61 Hz Rated current 1 A Number of test points: 5 - Device unit compact on trolley - Various connection cables and accessories as shown Overall dimensions L x W x H: 580 x 700 x 1460 mm total weight: 100 kg good condition Many other ELABO devices under stock number 57820 and 57821

Condition: used, Functionality: fully functional, total width: 1,600 mm, total length: 3,000 mm, total height: 300 mm, overall weight: 5,000 kg, Measuring plate from CMM utilization Cgolq D Eievfnz Ue Aot

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 Celqjihille D Ei Aegt JFA unwinding trestles Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Colq D Eijdz Srao Aegt Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Year of construction: 2001, Functionality: fully functional, total width: 1,400 mm, total length: 3,500 mm, total height: 800 mm, overall weight: 7,500 kg, Measuring plate from CMM utilization with adjustable feet Cslq D Eisu Uiite Aegt

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Cslq D Eiohvmkij Aegt Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Bosch starter service life test The machine is a Bosch in-house production. It is used to check the service life or durability of starters (also starter motors) of engines. Manufacturer: Bosch Type: Machine for testing the service life of starters Condition: used  Complete factory closure, Cgslq Dog Ith Re Ei Ajt large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!