Used Tool Cutter Grinder for sale (38,815)

Year of construction: 1979, condition: good (used), May WH50 relief grinding machine Kodpfjhadxcsx Ah Njll Data: Manufacturer: Rhode & Dörrender (May) Type: WH 50 year of manufacture: 1979 small grinding Ø: 3mm gr.grindingØ: 50mm weight: 1,35t footprint: 1520 x 1600mm Application range: 2 to 4 cutting tools round and relief grinding Suitable for grinding molding tools Diaform dresser

Condition: good (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 1087, total height: 2 mm, total length: 4 mm, total width: 25 mm, workpiece weight (max.): 350 kg, spindle speed (max.): 1,000 rpm, spindle speed (min.): 400 rpm, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, This machine is very good for rolled pignons Kedpfx Ahsv Ia D Ho Nsll

Condition: good (used), Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 550607, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Condition: There may be a defect in the control display. Ksdpfjv T Uzqex Ah Nsll A similar machine, built in 2019, has already been successfully auctioned by the same seller! FastLoad Loading System Special Feature: Fully enclosed within the machine enclosure Application: Automation solution for low-volume production Access: Operator access from the front of the machine Gripper Set: One set for the entire diameter range Space Requirements: Does not increase the machine footprint TECHNICAL DETAILS Peak grinding spindle power: 9.5 kW Direct-drive grinding spindle: Yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool Handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without removing the tool MACHINE DETAILS Polymer concrete machine base: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 16 kVA EQUIPMENT - Measuring probe mounted on the grinding head - Possibility of direct tool profile measurement - Polymer concrete machine base - Grinding wheel changer - Fanuc FastLoad automation

Condition: good (used), Year of construction: 2009, operating hours: 15,000 h, functionality: fully functional, total height: 35 mm, total length: 45 mm, total width: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 400 rpm, feed length X-axis: 35 mm, feed length Y-axis: 45 mm, feed length Z-axis: 45 mm, Machine for pignons and wheels production Kledpfx Ahjv I Rvmj Nol

Condition: refurbished (used), functionality: fully functional, grinding wheel diameter: 100 mm, grinding spindle speed: 7,500 rpm, grinding diameter: 160 mm, grinding wheel bore: 20 mm, Auction of a combination of a Christen AU-150 and a Haller UFS-155! Christen AU-150 TECHNICAL DETAILS Grinding range diameter: 1–160 mm Longitudinal grinding travel: 150 mm Longitudinal adjustment: 160 mm Cross grinding travel: 35 mm Cross adjustment: 180 mm Grinding head vertical adjustment: 110 mm Concave radius: max. 65 mm Convex radius: max. 20 mm Workpiece spindle mount: ISO 40 Divisions: up to 38 Grinding wheel diameter: max. 100 mm Grinding wheel bore: 20 mm Grinding motor: 0.75 kW Grinding spindle speeds (tool): 3,700 / 4,900 / 6,075 / 7,500 rpm Kodpfx Ahjya Aw Ro Nsll EQUIPMENT Clamping devices Grinding wheels Operating manuals

Condition: new, The DSB 200 D is a robust tool grinder in the Tool Grinders category by KNUTH, designed for sanding, grinding, and deburring metal parts and tools with precision. This heavy-duty machine features a rigid cast-iron body and a maintenance-free motor, ensuring durability and optimal performance. With a balanced rotor and premium bearings, it operates quietly, providing excellent results while prioritizing safety with an emergency stop switch and a safety observation shield. The DSB 200 D comes standard with a sturdy base and includes two universal corundum wheels, making it ideal for industrial use with a motor rating of 0.9 kW and a speed of 2,950 1/min. This tool grinder is engineered to withstand the rigors of workshop conditions, ensuring long tool life. For those looking for a reliable tool grinder, the DSB 200 D is the perfect choice. Request a quote today to learn more about the Tool Grinders and the unparalleled performance of this product group. Ksdpfxjwub Hne Ah Njll

Condition: new, The DSB 250 D is a robust tool grinder designed for efficient sanding, grinding, and deburring of metal parts and tools, making it a vital addition to any workshop within the Grinding Machines category. This industrial-grade equipment features a heavy-duty design with a rigid cast-iron body, ensuring minimal vibrations and optimal results. Equipped with a powerful 0.9 kW motor, it delivers a speed of 2,950 rpm and maintains quiet operation thanks to its balanced rotor and premium bearings. Safety is prioritized with an emergency stop switch and a safety observation shield. The machine is supplied with a sturdy base and two universal corundum wheels, providing everything you need for effective performance. Built to withstand rough workshop conditions, the DSB 250 D promises durability and longevity. For those seeking a reliable tool grinder in the tool grinders category, you can request a quote today. Klodpfx Ahewub Hhs Nol

Condition: new, The FSM 14 S Tool Grinder by KNUTH is a robust machine designed specifically for the precise and cost-effective grinding of HSS and carbide milling cutters, ranging from 4 to 14 mm in diameter. This handy milling cutter grinder series stands out for its user-friendly operation, making it an ideal choice for any tool crib, where efficient tool maintenance is essential. The FSM 14 S features the capability to grind 2, 3, and even 4-blade cutters, with an additional station available for outer spiral cutting edge grinding. Included in the package are collets tailored for common cutter diameters—4, 6, 8, 10, 12, and 14 mm—along with high-quality grinding wheels that enhance your workflow. This machine ensures rapid tooling and quick setup, enabling you to maintain your tools effectively. Invest in the FSM 14 S Tool Grinder today and elevate your tool sharpening capabilities. Request a quote for this reliable Tool Grinder and ensure your cutting tools are always ready for use. Kedpfxjp Dtx Us Ah Nell

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Kjdsnh Nu Uopfx Ah Noll

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2412306110, total height: 500 mm, total length: 800 mm, type of input current: three-phase, overall weight: 50 kg, power: 0.15 kW (0.20 HP), input voltage: 230 V, warranty duration: 12 months, control voltage: 230 V, volume flow: 600 m³/h, Electrostatic filter for oil or emulsion Klsdpfx Asybbrcoh Nel

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Kodpfx Ahopxm Ans Njll Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Kedpfjw Agxrjx Ah Njll Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Klodpfx Aeyan R Nsh Nel Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW Klsdpfxewxxdfe Ah Nol >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 Kjdpfx Ajvbifgeh Noll >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), WNT tool holder SK40 Ø8x80, HSC version with G2.5 balancing up to 25,000 rpm. Professional solution for HPC/HSC machining on CNC centers. Complete with a solid carbide end mill VHM (fine-pitch, multi-flute) – ready-to-use set. Very good condition, premium class equipment. Kedjw Rrv Ropfx Ah Nsll

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Klsdexdh Hqjpfx Ah Nol Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Kledpfxsxcg H Hs Ah Nel Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), For sale: complete GARANT SK40-10-50 tool holders equipped with VHM solid carbide end mills. Products from the renowned Hoffmann Group Germany, ready for immediate use on CNC machining centers. • Clamping type: SK40 (DIN 69871) • Bore size: Ø10 mm • Length: 50 mm • Catalogue no: 300100.10 • Balancing: G2.5 up to 25,000 rpm • Set includes: VHM solid carbide end mills Ø10 (various types – visible in the photos) • Ideal for machining steel, stainless steel, cast iron, and metal alloys • Very good condition – tested and ready for use GARANT tool holders ensure top-quality clamping and machining precision at high spindle speeds. Kedsw Sy Ahopfx Ah Noll -- PRICE IS PER PIECE --

Condition: good (used), Year of construction: 2007, Punch & die grinding machine from G&N Genauigkeits Maschinenbau Nürnberg GmbH G&N MPS-VTG 2 Kjdpfx Ahsx Sc Izs Nell

Condition: used, total height: 1,400 mm, total length: 1,900 mm, total width: 1,600 mm, Empty weight: 1.500 kg Kljdpex R S Sajfx Ah Nel Tafel: 1030x214mm Travel: 600mm - Documentation available: No - CE certificate present: No - Serial number: 431 - Motor power: 1.3kW - Transport dimensions: 1900mm x 1600mm x 1400mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available from Q2 / 2026. Designed for resharpening hobbing cutters, worm wheel cutters, cutting rotors, notching cutters, industrial knives, circular knives, shaper wheels, skiving tools, deep hole drills, and other workpieces/components. Kledex Tr H Nspfx Ah Nsl Control: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing device): 360° SK50 C-axis (rotary table): 270° X3-axis electrically operated with tailstock Grinding spindle: HSK80 Dressing unit Tool changer: 10-position magazine disc Coolant system: Turbo Separator Extraction unit: LTA CO2 extinguishing system Additional accessories available ex works Custom software solutions available on request Pre-acceptance at factory and commissioning, training, and final acceptance at customer site Financing/leasing options available Modification requests possible

Condition: used, functionality: fully functional, total height: 1,350 mm, total length: 570 mm, total width: 700 mm, overall weight: 160 kg, Tool grinding machine with tool holders in working condition. Kedpfox Trr Eox Ah Nell

Condition: repair required (used), Year of construction: 2007, functionality: limited functionality, machine/vehicle number: 6043, total height: 2,151 mm, total length: 2,160 mm, total width: 2,160 mm, spindle speed (max.): 7,200 rpm, spindle speed (min.): 2,000 rpm, feed length X-axis: 320 mm, feed length Y-axis: 220 mm, feed length Z-axis: 180 mm, overall weight: 3,200 kg, Characteristic - Diameter range 0.1 - 16[mm] - X axis :320 [mm] - Y axis :220 [mm] - Z axis: 180 [mm] Resolution: 0.0001 [mm] Fast travel: 12 [m/min] Encoder Linear glass scale - A axis :195 to 30 (225) Resolution 0.00005[°] Encoder Rotary glass scale - B axis :-75 to 130[°] Resolution 0.0001[°] Encoder Rotary, on AC motor Kedpfxov S Uakj Ah Nsll -C axis Stroke Tool rotation Resolution 0.001° Encoder Rotary, on AC motor - Grinding spindle Power 7 [kW] direct drive Rotation speed 2000 - 7200 [rpm] Grinding wheels Up to 8 wheels Max. 150 mm - CLAMPING Clamping collets W20 (option W15) Range 0.5 - 20 [mm] - Total power Maximum :18 [kW] - Dimensions :L x W x H 2160 x 1600 x 2151 [mm] - Weight 3200 kg In the set with the machine (included in the price) we also sell a balancer and Optima Trimos (tool setting device). These devices are fully functional. Additionally, at this price we can also throw in the profiler from the photos in the set. Interested parties are welcome to contact us.

Condition: used, Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: Kodpfslmrkzjx Ah Nell -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg