Tool cutter

DECKEL FP 1

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t required space / m Hodpozcgfqjfx Aanonr Parts machine for lids FP1 / FP2 Condition: NEW

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm Hodolkgvbepfx Aanonr travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Hnedpfxjztynfs Aanjr Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Hnsdpfxszr Hrzs Aanjr Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, functionality: fully functional, very good condition Hjdpfxjymnkvj Aanjnr

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Deckel FP1 milling machine with Heidenhain digital control in very good condition. Hnodpfszr Hdwex Aansr Technical specifications: * Speed: 40 - 2000 rpm * Feed rate, continuously variable in 3 axes * Rapid traverse in 3 axes * Spindle brake * Table travel X/Y/Z: 300/160/340 mm * Vertical quill * Clamping system SK40/M16 * Weight approx. 800 kg Accessories and equipment: 3-axis Heidenhain digital read-out Coolant system Operating manual, spare parts list

Condition: good (used), Deckel FP1 milling machine, made in Germany by Friedrich Deckel AG, Munich. The machine is operational and in working condition. For more information, please contact us. Hodpsw Amaiefx Aanenr

Condition: used, Year of construction: 2006, operating hours: 37,654 h, functionality: fully functional, machine/vehicle number: 10915548924, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 50 eVo linear universal machining centre, year of manufacture 2006. The guides of the X, Y, and Z axes, as well as the ball screws, were completely replaced at the end of 2023. Geometrically, the machine is currently as good as new. If you have any questions or need further information, please feel free to send us a message or give us a call. Hnjdpfsx Srp Usx Aanor

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm Hedpezrt Rkjfx Aanjnr table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm Hnodpfjzrn Tyjx Aaner >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition Hedpfxeghtvae Aanonr

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2102-2821, Offer 26207 Technical data: - Machine originates from the Weser Ems vocational training center and underwent a complete overhaul at - FPS Werkzeugmaschinen GmbH in Warngau in 2015-2016. - Table size 600 x 220 mm - Working range of the axes: - X (longitudinal) 300 mm - Y (transverse) 340 mm - Z (vertical) 150 mm - Distance between table axis and stand 655 mm - Tool holder ISA 40 - 16 working spindle speeds 40 - 2000 rpm - Feed rates X - Y - Z axes 10 - 500 mm/min - Rapid traverse 1200 mm/min - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 650 x H 1600 x D 1000 mm - Weight approx. 600 kg - Including: - Positioning control with Active digital display - Adjustable vertical milling head with drilling spindle - Central lubrication system - Fixed angular table - Collet set, various holders + milling cutters - Rotary table Hsdszrfifspfx Aanonr - Drawer cabinet with drawers on roller bearings

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Hnsdpfer U St Uox Aaner Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray Hnsdpfx Aajh I Nqwsner - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Hnjdpfx Aajdzqb Ssnsr Spindle mount: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition