Used Tool Grinder for sale (37,782)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg Isdpfxsztxcze Abnjif MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Spindle hours, spindle 1: 7,872 h Spindle hours, spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO Iisdpfx Aboztxgmonsf EQUIPMENT CE marking Measuring probe Tool holders (as shown in the picture)

Condition: excellent (used), Year of construction: 2016, operating hours: 200 h, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, feed length X-axis: 100 mm, feed length Y-axis: 190 mm, feed length Z-axis: 325 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 270 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 300 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 190 mm, table width: 200 mm, table height: 1,020 mm, power: 1.1 kW (1.50 HP), height adjustment type: electric, workpiece diameter (max.): 400 mm, input current: 20 A, grinding diameter: 300 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 280 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2022, distance table to spindle center: 325 mm, tool diameter: 300 mm, workpiece length between centers: 270 mm, distance between centers: 270 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2016 S25 003004 V, 50/60 Hz, with CEE plug and cable Iodpfxjw U Ehbj Abneif Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: * Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) * CCD camera and monitor * Dividing head Sk 40 with dividing disk 24 R * 1 dividing disk each 14, 16, 18 * Tightening screw M 16 * Counter bearing complete with 4 center punch points * Center point Sk 40 with driver * Twist-u. Relief grinding device with rack housing * Dust extraction completely without vacuum cleaner * LED machine light * Tooth support complete with support and sliding blades * Setting gauge * Universal setting gauge * Handwheel facility * Dressing device with 3 diamonds * 1 set of collets 1.0 - 17.5 mm by 0.5 mm rising * Pliers sleeve and extraction nut and key * 10 pieces of direct collets Sk 40 6 - 25 mm * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * Clamping nut * 12 grinding wheel chucks * Tool cabinet with shelves * 2 protective hoods * various diamond / borazon discs * Operating instructions and key, spare parts list, circuit diagram * Set of technical grinding instructions ##### Machine is partially overhauled and has an electrical acceptance report!#####

Condition: repair required (used), Year of construction: 1989, functionality: not functional, Michael Deckel S 12 M tool grinding machine. The machine has an electrical problem, error on the display. Otherwise in good condition. Accessories: grinding wheel holders, operating manuals. Iisdpfxjx Nclue Abnef

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. Iiodpfswu Nw Uex Abnof It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: good (used), Longitudinal travel 450mm Wheel diameter 175mm Turning tool holder Dividing head with collets Table D-140mm coolant installation Ijdpfx Abofgd Hhenjif MARCELS MASCHINEN CH

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg Iodexnimtopfx Abneif - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Condition: like new (used), Tool Grinder Brand:Schneeberger Iijdpfjllwx Ejx Abnof Type:11 ARIES Nro13901 Tool sharpener Schneeberger with accessories Stock no:2001616TKG

Condition: used, Year of construction: 2002, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 2178 / V, 50 Hz, with CEE plug and cable Iiedpsw U Ehnsfx Abnof !! Original paint !!! ! Machine is in delivery condition, depending on customer request the machine can be overhauled ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics* * Dust extraction device without suction cup * Halogen lamp * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Walter Helitronic Vision - Year of manufacture: 2005 - Control system: HMC600 i7 panel with Tool Studio 3.3 Ijdpfxjzu Iyle Abneif - Pallet loader - Grinding spindle motor power: 24 kW

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 850 mm, workpiece weight (max.): 12 kg, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, grinding length: 190 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 10,000 rpm, center height in crank: 220 mm, center height: 330 mm, collet bore: 25 mm, grinding spindle speed: 10,000 rpm, feed rate Z-axis: 1 m/min, pivoting range: 360 °, travel distance X-axis: 100 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 325 mm, center width: 620 mm, grinding spindle motor power: 1,100 W, table length: 500 mm, table width: 180 mm, table height: 1,020 mm, power: 2 kW (2.72 HP), height adjustment type: electric, workpiece diameter (max.): 620 mm, input current: 20 A, grinding diameter: 130 mm, input frequency: 50 Hz, disc diameter: 125 mm, input voltage: 360 V, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 1,800 mm, grinding wheel speed: 10,000 rpm, year of last overhaul: 2025, warranty duration: 12 months, distance table to spindle center: 325 mm, tool diameter: 400 mm, workpiece length between centers: 270 mm, distance between centers: 300 mm, surfacing fence height: 190 mm, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor 1,1 kW speeds of grinding spindle 2 - 10.000 U/min total power requirement 2,2 kW !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! * Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE!!! overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray Iodpfx Aow U Ehhebnjif motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw connections > EMV cables > new protective tubes > Emergency stop switch > new control panel * Machine stand milled + ground, new carrier plate Basic equipment: - LED light Waldmann - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * CE-documents * Machine and accessories overhauled and with electrical acceptance report * abroad 6 months warranty

Condition: used, Year of construction: 1984, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL Isdsw U Eg Dspfx Abnsif 465 / 84 380 V, 50 Hz Colour: green !!! Original paint !!! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics * Dust extraction device without suction cup * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Iedpfjb Umtkjx Abnoif

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm Iodpfxjw U Ehzs Abnsif * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm Iijdpfx Aewpqkrsbnof - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Operating Procedure – For Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale!

Condition: used, Year of construction: 2011, operating hours: 2,200 h, functionality: fully functional, power: 7.5 kW (10.20 HP), year of last overhaul: 2026, We are offering this used Schneeberger Norma CFG 7.5 kW tool grinding machine, manufactured in 2011. OPERATING HOURS: 2200! Automatic, programmable central lubrication system Pneumatic hoses completely renewed 4/2026 Standard version PLUS: - Hydraulic quick-change tool clamping system - Grinding wheel arbor HSK 50 - Quinto-Basic-SW woodworking tools - Coolant filter unit 330l; 6.3 bar - CO² fire protection system Optional accessories: - Manufactured in 2013 - MIL workpiece loader incl. quick-change gripper for profile knives and shank tools Iiedpfezqu Tdox Abnsf - 1 pallet for profile knives - profile thickness: 2mm; plate width up to 150mm If you have any questions or require further information, please feel free to send us a message.

Condition: used, Year of construction: 2008, operating hours: 43,705 h, functionality: fully functional, machine/vehicle number: 192/2008, total height: 2,400 mm, total length: 1,800 mm, total width: 1,930 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 3,800 kg, rotational speed (max.): 40,000 rpm, grinding spindle speed: 40,000 rpm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, grinding spindle motor power: 14,000 W, power: 22 kW (29.91 HP), workpiece diameter (max.): 250 mm, grinding diameter: 250 mm, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 500 rpm, year of last overhaul: 2023, number of spindles: 1, number of slots in tool magazine: 12, Equipment: rotational speed infinitely variable, We are offering this used Deckel S22E universal machining center, year of manufacture 2008. Model: S22 Serial number/year: 192/2008 Machine weight: 3700 kg Maximum wheel diameter: 150 mm Rotational speed: 40,000 rpm Wiring diagram: 2292509 S558 Mains voltage: 3P/N/PE 3x400 V Frequency: 50 Hz Nominal current: 25 A Power consumption: 15 kW Spare fuse: 32 A Control voltage: 24 V Suitable for oil-based grinding: Yes Spindle: Supplied with an additional fully overhauled backup spindle Iedpfx Aoy Nbnnebnoif Spindle cooling: Equipped with external spindle cooling (MTA TAEevo Tech MINI 10, Year 2017, 486x660x876 mm) Fire suppression system: Kraft & Bauer FB 703 TFT monitor: Needs to be replaced If you have any questions or would like more information, please feel free to contact us or call us.

Condition: new, Year of construction: 2025, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm current capacity 380 kVA power capacity - grinding motor 1,1 kW speeds of grinding spindle 2 - 10.000 U/min total power requirement 2,2 kW !!! We have almost all spare parts for Deckel S 11 machines in stock !!! * Machine and accessories overhaul year of construction 2025 with CE marking DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 400 V, 50 Hz, with CEE plug and cable Color: 2 K new paint Stand RAL 7005 mouse gray Body and accessories RAL 7035 light gray Motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > New three-phase drive > new brake motor Iodpfx Abjw U Eh Ujnsif > new frequency control > new touch-safe built-in electrics > EMC cable glands > EMC cables > new protective hoses > Emergency stop switch > New control panel * Machine stand milled + ground, new support plate Basic equipment: - LED light Waldmann - Suction without a vacuum cleaner - Protective cover for grinding wheels up to Ø 125 mm - Set of technical information - Abrasive wheel holder 51 mm - Set of suspension devices for transport - 5 adjusting screws Accessories: * Video measuring system with CCD camera and image processing software with new measuring cross slide New RSF scales on the measuring cross slide and on the machine machine axes up and across (4 axes) incl. complete mounting and adjustment * universal index head Sk 40 with dividing disc 24 R with mounting points foroptics * Operating key, operating instructions, spare parts list, circuit diagram * Technical grinding instructions * Machine and accessories overhauled and with electrical acceptance certificate * abroad 6-month warranty We will gladly accept your used Deckel S 11 as a trade-in - please contact us! !!! Accessories can be varied as required !!! Pictures include special accessories

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Iiodpfx Absw U Eg Ronof Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Iodpfx Abjw Nn Akoneif Largest distance between centers: 950 mm Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately

Condition: good (used), Year of construction: 2003, functionality: fully functional, SAACKE UWIE – 5-axis CNC tool grinder, year 2003 We offer for sale a universal SAACKE UWIE CNC tool grinder, designed for the production and sharpening of rotary cutting tools. The machine is particularly suitable for grinding and sharpening milling cutters, drills, stepped tools, shaped tools, and other precision rotary tools. Technical data: Manufacturer: Gebr. Saacke GmbH & Co., Germany Type: UWIE Serial number: UWIE/209804 Year of manufacture: 2003 Design: CNC tool grinder CNC-controlled axes: 5 axes Power supply: 400 V / 3 AC / 50 Hz Rated machine power: 20.5 kW Rated current: 36 A Fuse rating: 50 A PC/CNC control with monitor, keyboard, and mouse CNC rotary work spindle Multi-axis tool grinding ELBARON dust extraction system Iijdpfx Aozvhzrebnof The machine is designed for precise CNC grinding and sharpening of tools and enables complex machining of tool geometries in a single setup. Inspection and testing of the machine in operation are possible.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1307-62, total height: 1,600 mm, total length: 1,360 mm, total width: 610 mm, grinding wheel diameter: 175 mm, overall weight: 670 kg, grinding length: 500 mm, grinding spindle speed: 4,350 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 225 mm, travel distance Z-axis: 230 mm, grinding spindle motor power: 550 W, table length: 800 mm, table width: 165 mm, power: 0.55 kW (0.75 HP), disc diameter: 175 mm, Semi-automatic tool grinding machine with infinitely variable table drive. Machine inspected, grinding motor newly fitted with bearings. Grinding spindle of newer design without disturbing noises (repairable). Bellows in good condition, cross bellow new. Clamping surface undamaged. Electrical system inspected. For further details, see operating manual. Iedpfx Absytq Abensif

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: Iisdpfx Abjqd N S Denjf 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 14197, workpiece diameter (max.): 180 mm, workpiece length between centers: 330 mm, Waco Schneeberger 3 norma 4 Isdpfezt Naqjx Abnjif Machine Number : 14197 Year of Construction : 1985 Fully working condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, incl. complete set of accessories such as video camera, spiral back-feed device Iedpoypcd Ajfx Abneif