Tool Grinder - Universal

DECKEL S11

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Lhsdpfjr Elwksx Adwsg Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Lodsv Rpn Tspfx Adwjhg We cordially invite you to cooperate!

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Lhodpfx Adephvlajweg Mimu machine-tools (Italy)

Condition: excellent (used), Year of construction: 1978, Universal tool grinding machine Manufacturer: DECKEL (Germany) Ljdpfxjyzacnj Adwjhg Model: S11 Application: Regrinding of milling cutters, drills, and turning tools Dimensions: approx. Length: 900 mm Width: 700 mm Height: 1,500 mm

Condition: used, Year of construction: 1996, spindle passage 80 mm Lhedpfoxbtqvjx Adwsg max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: ready for operation (used), Year of construction: 1990, functionality: not functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Lodpfx Adjyhxccswjhg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, incl. complete set of accessories such as video camera, spiral back-feed device Lhjdpfsypcd Asx Adweg

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. Lhodpfxov D A Ime Adweg If you have any additional questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 815, spindle speed (max.): 8,000 rpm, overall weight: 600 kg, workpiece length between centers: 336 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Universal indexing head center height: 170 mm Tailstock center height: 120 mm (with intermediate support: 170 mm) Maximum workpiece length between centers: 336 mm Workpiece diameter with cantilevered mounting: approx. 600 mm Maximum tip length: 950 mm Internal taper of the dividing spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine base) T-slots: 8 mm (additional elements) Grinding stroke: 190 mm Transverse movement of tool holder: 100 mm Vertical movement of grinding head: 325 mm Tool holder movement range: 230 mm Indexing device on tool slide: 330 mm Grinding head mount rotation: 360° Tool holder rotation: 360° Grinding head rotation: 360° Universal attachment rotation: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4,000 / 8,000 rpm Infinitely variable DC speed: 2,000–10,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,900 mm Weight: 600 kg EQUIPMENT Two-axis digital display Lhodpsym Alhsfx Adwsg Extensive range of accessories suited to the machine External Reference: Segato

Condition: good (used), functionality: fully functional, machine/vehicle number: S11-016, We are selling our Deckel S11. The machine is operational, and a digital readout can optionally be purchased as well. Lsdpfxjw A Rrvs Adwehg

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Ledjqabiaspfx Adwshg Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Lodpfxsqd N S De Adwshg Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Lodpfjxu E Nqox Adwehg Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools Lodpfxjxtp Hwo Adwohg WEIGHT 52T

Condition: used, used Michael Deckel S11 - fully functional Lsdox Hyn Ispfx Adwohg