Used Thread Rolling Tools for sale (43,281)

Condition: used, Thread rolling machine UPWS 25. Chedpjzd Rf Njfx Agrod

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Chsdpfjuz If Nex Agrod - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 1989, machine/vehicle number: 921, overall weight: 3,500 kg, type of input current: three-phase, ORT Italia RP20 hydraulic rolling machine for creating threads, knurls, and profiles through cold forming. Manufacturer: ORT Italia Model: RP20 Serial number: 921 Year: 1989 Number of rollers: 2 Maximum rolling force: 20 tons Maximum workpiece diameter: 60 mm Chsdps Afaa Nofx Agrsd Spindle speeds: 25, 40, 55, 65, 85, 105, 135 and 220 rpm Power supply: 380 V three-phase, 50 Hz Control: hydraulic / electromechanical Machine complete as shown in the photographs. Inspection possible at our warehouse. Loading onto the transport vehicle is the seller’s responsibility. Transportation is the buyer’s responsibility.

Condition: used, Year of construction: 2013, pressure 20 - 600 kN adjustment of rolling slide 2 x 90 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 34 1/min torque per rolling spindle 6.160 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Felsomat loader cell Complete housing Cjde Afar Ejpfx Agrehd

Condition: excellent (used), Year of construction: 2004, LEISTRITZ RT 400-CCA Thread Rolling Machine Manufacturer: Leistritz Thommen GmbH, Switzerland Model: RT 400-CCA Machine Type:Thread Rolling Machine Year of Manufacture: 2004 Serial Number:1028 Country of Manufacture: Switzerland Technical Specifications Rolling Capacity - Maximum rolling force: 40 tons - Minimum shaft length: 125 mm - Maximum shaft length: 275 mm Rolling Die Dimensions For Ø69.85 mm tooling: - Minimum rolling die diameter: 176–178 mm - Maximum rolling die diameter: 215 mm For Ø80 mm tooling: - Minimum rolling die diameter: 176 mm - Maximum rolling die diameter: 210 mm Electrical Specifications - Power supply: 3 × 400 V - Frequency: 50 Hz - Rated power: 65 kW - Main fuse: 125 A - Control voltage: 24 V DC - Spindle power: 22 / 20.5 kW Hydraulic and Pneumatic System - Hydraulic operating pressure: 270 bar - Compressed air pressure: 6 bar - Hydraulic unit manufacturer: CYMAX AG, Switzerland Cedpfoz Rzx Sox Agrjhd - Hydraulic unit type: IHS240-DD10-IT75/55+18/270-9.2-A783.1 - Hydraulic oil tank capacity: 240 liters - Hydraulic reservoir capacity (auxiliary): 60 liters - Hydraulic pump flow rates: 75 / 18 / 40 l/min Machine Dimensions and Weight - Approximate dimensions (L × W × H): 3,400 × 2,900 × 2,200 mm - Machine weight: 4,900 kg Equipment - Two-spindle thread rolling arrangement - Hydraulic rolling system - CYMAX hydraulic power unit - Coolant and filtration system - Additional spindle pair for Ø69.85 mm and Ø80 mm tooling (subject to confirmation) Control - PLC control system - Control system retrofit reported in 2019 (subject to confirmation)

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Chedpfx Aeh A S Htegrjd Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Hydraulic rolling process Felsomat loader cell Csdpfxjw E Nmke Agrshd Complete housing

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Csdpfoymlx Dex Agrshd Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Codpfxsycq Ebs Agrehd

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Cjdpfsxytmhox Agrohd Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Cjdpfovyyyxsx Agrjhd Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: good (used), functionality: fully functional, GWR 80 thread rolling machine. Chodpfxe Ahmvio Agrsd

Condition: used, Year of construction: 1997, Technical details: pressure: 10 t workpiece diameter - max.: 50 mm threading length: 100 mm max. rollable pitch: 3 mm rolling power: 100 kN workpiece diameter min/max: 117/175 mm revolution per minute: 0 - 150 U/min Weight approx.: 2550 t dimensions of machine: 1,25 x 1,38 x 2,15 m Codpfx Agox Iu Iforehd *

Condition: good (used), overall weight: 2,300 kg, spindle diameter: 0 mm, total height: 1,375 mm, total length: 1,645 mm, total width: 1,520 mm, One - Good used Profiroll Model UPWS 16 - 16 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling. Max threaded dia. 70mm Min. threaded dia. 3mm, Max width in=feed rolling: 150mm, rolling spindlle dia.: 69.85mm power of main motor: 6.5 kw Cedezt R T Espfx Agrshd Complete with coolant equipment, work rest blade holder and five sets of thread dies.

Condition: excellent (used), overall weight: 1,350 kg, spindle diameter: 40 mm, type of input current: three-phase, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, One - Very Good Used ORT Model RP10/U - 10 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling Max. threaded diameter: 30mm Min.threaded diameter: 2mm Max. width in-feed rolling: 65mm Power of main motor: 4 kw Complete with coolant equipment , work rest blade holder ,open fronted spindle front supports for easy access with small dia. components - 13 set of in-feed thread dies Cjdpfx Agezt R Rwerjhd

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Incoterm: EXW Calolziocorte (LC) The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Cjdpfjyycr Nsx Agrohd Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Csdpfx Aowiu Afsgrshd

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0049, overall weight: 12,000 kg, Manufacturer: Profiroll Type: UWRA 160S Control system: Siemens Machine type: Ring rolling machine Pressing force: 63 t Max. outer diameter of round parts: 160 mm Dimensions: 80 mm Cedez Tznropfx Agrjhd Roller bore: 30/100

Condition: used, Year of construction: 1994, Thread Rolling Machine EWMenn GW63 Flat dies Year: 1994 Diameter range: max 8 mm Shaft length under head: 80 mm Chsdpfx Asylw E Tegrod Max. thread length: 58 mm

Condition: used, Year of construction: 2008, Control SINUMERIK 840 D rolling power 800 kn diameter max. Werkstück: 250 mm Codpfx Agsztfwljrehd work piece width 80 mm spindle diameter 110 mm 100-700 1/min power capacity 110 kW length 2600 mm width 2600 mm height 2600 mm weight 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm

Condition: refurbished (used), Currently undergoing rebuilt, it is possible to customize it. Ingramatic RP1 Fixed die length: 85 mm. Moving die length: 95 mm. Die thickness: 25 mm. Die height: 65 mm. Chjdpfx Aszcd Hfegrsd Thread diameter: M2 ÷ M6 Shank length: 100 mm. Thread length: 62.5 mm. Speed Range up to: 600 pcs./min.

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning Chodpfx Agjyml Ekorod

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head Cjdpfju Tyvhox Agrjhd -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND / ZOM Type: TR4L Constr. year: 1976 diameter range: 6-12 mm shaft length under head: 170 mm max. thread length: 102 mm Codpfx Aswi Tmvogrjhd output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Csdpfx Agov Tqdbjrshd Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm