Used Thread Rolling Machine for sale (69,169)

Condition: not inspected (used), functionality: unexamined, overall weight: 250 kg, spindle speed (max.): 3,200 rpm, table length: 230 mm, table width: 230 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 1,450 rpm Spindle speed: 500–3,200 rpm Kljdpfx Ajym T Tishvjp Table dimensions: 230 x 230 mm MACHINE DETAILS Operating voltage: 220/380 V Rated current: 4.7/2.7 A Connected load: 1.1 kW Dimensions & weight Dimensions (L x W x H): 700 x 650 x 1,900 mm Weight: 250 kg External reference: Lot 20 /Koch

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Ksdpfx Aow Ed S Ushvolp Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, number of digital displays: 4, Equipment: cone bending device, emergency stop, hardened rollers, 3-Roller Hydraulic Plate Bending Machine with Digital Displays Kljdjyrh Edspfx Ahvep Manufacturer: ROUNDO Model: PASS 230 Year of manufacture: 1992 Machine No.: 925194 Max. sheet width: 2000 mm Max. sheet thickness: 8 mm Pre-bending: 6 mm 2 powered rollers Cone bending device Drop-end bearing Hydraulic adjustment of rollers Hardened rollers Emergency stop Manual sheet support via spindle

Condition: excellent (used), Year of construction: 2022, BENDING LENGTH 3100mm ROLLING CAPACITY 28mm PREBENDING 22mm TOP ROLL DIAMETER 380mm BOTTOM ROLL DIAMETER 360mm Klsdeyrcyvepfx Ahvsp SIDE ROOLS DIAMETER 270mm WORKING HEIGHT 1415mm MOTOR 15kw LENGTH 4760 mm HEIGHT 1924mm WIDTH 2005 mm WEIGHT 17000 kgs

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation Klsdpfxsxn Rrqj Ahvjp - 400V

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Ksdjvptz Ijpfx Ahvolp Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Klsdpfx Ajyl U Tujhvjp Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: good (used), Year of construction: 1993, machine/vehicle number: 9340020, Offer 26035 Technical Data - Three powered rollers, each roller hydraulically adjustable - Suitable for prebending and cone rolling, side arms can be swung out - Operation from a swiveling control panel with digital actual value displays - Max. working width: 3050 mm - Max. plate thickness at 400 N/mm² yield strength without prebending: 20 mm - Prebending at minimum bending diameter 5 x top roller diameter: 16 mm - Top roller diameter: 340 mm - Side roller diameter: 250 mm Kjdpfx Ahjyq E S Eevslp - Bottom roller diameter: 300 mm - Drive: 400 V / 9.5 kW - Working speed adjustable - Space requirement: approx. W 6200 x H 1650 x D 1650 mm - Machine weight: approx. 16,000 kg - Total weight (machine + support column + support arm): 19,500 kg - Includes: extended roller ends for mounting profile rollers, - conical bending device - lateral support arm hydraulically adjustable - upper support column hydraulically adjustable

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display Kodpfx Ajyp E Sishvjlp – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V

Condition: good (used), input voltage: 400 V, working width: 600 mm, total width: 3,480 mm, total length: 1,400 mm, total height: 2,640 mm, type of input current: three-phase, overall weight: 2,000 kg, König Eco Twin 800 Model: 800-DB800 K6-Schn6/B-DA Head machine for dough dividing and rounding Classic König Rex, 6-row With spreading conveyor, proofing cabinet Depositing device for 60x80 trays Stainless steel version Connection: 400V, 16A CEE plug Kledpfx Aex Ncc Tehvsp Dimensions: approx. 3480 x 1400 x 2640 mm (W x D x H) Used machine We have more bakery machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, working width: 320 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 03/2027, type of input current: three-phase, overall weight: 170 kg, conveyor belt width: 320 mm, year of last overhaul: 2026, Lippelt Rumo Seeding Station Kodsx Ncc Hjpfx Ahvjlp Moistening in water bath Single-sided or double-sided seed application possible With large seed plate, Stainless steel construction, mobile Exclusive to us: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: L 2300 x W 750 x H 1370 mm Used machine, cleaned & SAB inspected With warranty & spare parts service Options: Seed plate Maintenance contract Delivery service Spare parts box for added safety Training & commissioning We have other bakery machines in stock!

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown - Coolant system included - Available documentation Ksdpfx Aeyn Snhshvjlp Legal Notice: Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm Kedpfx Aoylyh Djhvelp - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: Kljdpfx Aju Tg Spjhvsp 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine – Advanced Threading for Industrial and Workshop Applications The CORMAK RGE36PWx1700 electric tapping machine is an advanced threading solution that performs exceptionally well in both large production plants and smaller workshops. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction that enables efficient and precise threading in a wide range of industrial environments. It is powered by a servo drive, ensuring reliable operation and precise control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can cut threads in various materials such as steel, stainless steel, aluminum, and non-ferrous metals. The tapping arm is equipped with a quick-change chuck, allowing fast and easy installation of taps. Adjustable overload clutches integrated into the tap holders provide additional protection against tool damage during operation. This system also allows precise torque adjustment, ensuring high threading accuracy. Precision and Work Efficiency of the CORMAK RGE36PWx1700 The performance of the CORMAK RGE36PWx1700 is the result of modern technology combined with a heavy-duty design, ensuring long-term, reliable operation. The servo drive and rotating arm deliver high precision while maintaining fast threading cycles. Adjustable rotational speed and thread depth make the machine ideal for cutting threads with varying specifications. The threading process is further supported by a micro-spray system that effectively cools the tools, improving efficiency and extending tool life. Standard Equipment – CORMAK RGE36PWx1700 Touchscreen control panel – easy programming of tapping parameters such as rotational speed, tapping direction, and thread depth Rotating tapping arm – enables thread cutting at any angle Tap holders with adjustable overload clutches – protect the machine from excessive load and ensure long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – effective chip removal and improved visibility during tapping Technical Specifications – CORMAK RGE36PWx1700 Power: 2 kW Klodpfxeycdhpo Ahvop Power supply: 230 V Weight: 56 kg Maximum arm reach: 1700 mm Maximum rotational speed: 125 rpm Included in the set: Tap holders for tap sizes from M5 to M36 *The machine is sold without a worktable, vise, and taps.

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MC0 35100, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, roller diameter: 1,000 mm, sheet thickness (max.): 130 mm, sheet thickness steel (max.): 130 mm, total length: 3,500 mm, power: 240 kW (326.31 HP), Technical details Top roll 1 mm Max. bending width: 3,500 mm Max. sheet thickness: 200 mm Ksdpfx Ahsyn Agbsvelp Total power requirement: 160 kW Smallest roll-in diameter: 770 mm Maximum cylinder pressure: 2 x 2 t Top roll Ø1000 mm Bottom rolls Ø900 mm

Condition: new, Ostas 3-rolls round bending machine ORM 1070 x 130 Special equipment included in the price hardened rolls motorized rear roller adjustment digital display sheet width 1070 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1070 mm roll diameter 130 mm weight 1150 kg dimension L-W-H 2250 x 800 x 1100 mm Motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line Kjdpfeiu Hpfox Ahvslp CE mark values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3 rolls round bending machine SMR-S 1570 x 170 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized back roll adjustment 2 x digital display sheet width 1570 mm sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1570 mm smallest diameter 255 mm roll diameter 170 mm weight 1960 kg dimension L-W-H 3200 x 920 x 1260 mm motor 5,5 KW Equipment: upper and lower roll electr. driven Kljdpoiw D Smofx Ahvop upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24 Kledpfjkhmgiox Ahvsp

Condition: new, Rollmak 3-roll round bending machine SME 140-20/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1550 kg dimension L-W-H 3150 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out Kodpfxslu Eume Ahvjlp conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Ostas 3-roll round bending machine SBM 1070 x 95 Features: Asymmetric 3-roll round bending machine with motor drive Ksdjgkwimepfx Ahvslp Special equipment included in the price: Hardened rolls Motorized rear roller adjustment Digital display Top roller can be swung out Conical bending device Foot switch Technical details: sheet width: 1070 mm sheet thickness: 3,0 mm roll length: 1070 mm Roll diameter: 95,0 mm Smallest bending diameter: 140,0 mm Motor power: 1,1 kW Dimension L-B-H: 1350 x 760 x 1250 mm Weight: 370 kg

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 2570 x 275 Hydraulic Side Roll Positioning 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Console Roll Length: 2570 mm Top Roll Diameter: 275 mm Kjdoxrdn Hjpfx Ahvelp Side Rolls Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 9500 kg Dimensions (mm): 5350 x 1750 x 1950 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are based on 250 N/mm2 yield strength Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Kledpfxsxrc Dtj Ahvjp Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: new, Ostas 3-roll round bending machine SMR-S 2070 x 190 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls Kjdpjg Nz T Isfx Ahvslp motorized back roll adjustment digital display sheet width 2070 mm sheet thickness 7,0 mm max. sheet thickness 6,0 mm bending roll length 2070 mm smallest diameter 285 mm roll diameter 190 mm weight 3480 kg dimension L-W-H 3750 x 920 x 1260 mm motor 4 KW equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operating panel safety line, CE-sign

Condition: new, Cesurbend 3-roll round bending machine MRS 1050 x 110 Technical specifications: Special equipment included in the price: motorized lower roll adjustment Klodpfxehrdiuj Ahvsp hardened rolls motorized rear roller adjustment digital display sheet width 1050 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1050 mm roll diameter 110 mm weight 1080 kg dimension L-W-H 1820 x 850 x 1150 mm Motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark