Used Thermal Bridges for sale (1,909)

Year of construction: 1979, condition: good (used), Overhead Crane DEMAG Type: EKKE Year 1979 Rodpoh Uqbfefx Ab Iobw Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available with 20 meter power rail included.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Rbjdevzub Hepfx Ab Ijw Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Rjdpfx Abswtg Hds Iobw

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, overall weight: 3,100 kg, total width: 10,600 mm, load capacity: 8,000 kg, working height: 9,000 mm, GZUT/SWF bridge crane 8t, 10.4m, emag: 9m in excellent condition for sale Manufacturer: GZTU Type: LNE Year of manufacture: 2004 Lifting capacity: 8t Span (cone crown distance): 10.4 m Total width: 10.6m Rbodpjx Dk A Iefx Ab Isw Bridge running gear speed: 20 m/min Lifting speed: 5 / 0.83 m/min (two-stage) 400 V / 50 Hz Dead weight: 3.1t Noise level: Lm(A) ≤ 85 dB(A) With wireless remote control, documentation. Additional information, exact dimensions can be found in the pictures.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, overall weight: 8,000 kg, total length: 16,300 mm, load capacity: 12,500 kg, Manufacturer: STAHL Crane Komép bau " Completely renovated in 2011" Span: 16.3m Lifting height: 10m Load capacity: 12.5t Modernized, wired remote control system, new STAHL 12.5t trolley Rsdpfx Absxtmhlj Isbw

Condition: excellent (used), Year of construction: 2012, radio controlled; 2 trolley, Max. Capacity 30t; Span 14.100mm; Trolley 1.600mm; Impeller Diameter 420mm; Trolley Diameter 280mm; Nr. of Wheels 4. including, steel pillar construction, crane runway(blue color metal parts). Rbjdpfxelz T Nkj Ab Iew

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 6310, CNC – rotary-head bridge saw SPRINT 456 Vacuum manipulator 500 kg X-axis 4,150 mm Y-axis 4,550 mm Z-axis 600 mm Spindle drive motor 18.5 kW Drilling unit with 1/2" left-hand thread Redpfx Aboyhlc Se Iobw Software EasyCut / EasyStone Premium Worktable 4,140 mm x 2,000 mm (tilting table) Additional table extension 4,140 mm x 1,200 mm Underslung saw Steel foundations Slab thickness measuring unit Saw blade measurement Air conditioning Slab digitization system Spray bar

Condition: ready for operation (used), A good used Thermal Transfer overprinter from Open Date Equipment Ltd - model 107L - intermittent motion TTO with a large print area of 107 x 160mm - complete with frame power supply - keyapd - software and cables. Manuals available Rsdpfx Absyg Nlus Isbw Ready to ship worldwide Export documentation available Request additional images and videos via Whats App

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Rbjdpfx Abew Hzu Ae Ijw Lot of 65 boxes. Diameter: 18mm Thickness: 9mm Length: 23m

Year of construction: 1991, condition: good (used), Calendar thermal sealing machine Tecnoblock Made in Italy machine in good condition, working very well Rbedpfouq Nn Nsx Ab Isw year 1991

Condition: good (used), Year of construction: 2010, 271 USED Heuft Thermal Oil Ovens, Vulkan model + Concord loading/unloading system. Year of manufacture: 2010. EQUIPMENT: - 4 VTR ovens, 12.8 m² each, totaling 50 m², - 1 trolley oven for 3 trolleys, 80x60, 8 levels, - Concord loading/unloading system, - dough loading station, - automatic bread unloading station (after baking), - conveyor belt for transporting bread to packaging, - 6 proofing trolleys and plates, - 12 baking trolleys, - HK 400 heating boiler, - thermal oil system, - heating oil, - set designs. Rjdpfx Ajydfzgeb Iebw Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2020, overall weight: 1,327 kg, total length: 7,000 mm, total width: 2,500 mm, load capacity: 6,000 kg, We are offering this used uniman JTHS1 6000/7-2/2.5-1 spreader beam, year of manufacture 2020. Manufacturer: uniman s.r.o. Model: JTHS1 6000/7-2/2.5-1 Serial number: 262/718 Year: 2020 Load capacity: 6000 kg Dead weight: 1327 kg Condition: used – as new Including transport and storage trolley Rbedpfxeyddnfo Ab Iow If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h Rjdpfovtzdlex Ab Iobw -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw Rsdpfstpkv Aox Ab Iebw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: good (used), Year of construction: 1984, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane Rjdpfx Aevt Rapjb Iebw -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging Redpsfyh Dtefx Ab Ijbw -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Condition: good (used), Welding iron -Welding bar: for welding plastics, from mask manufacturing machine -Thermal panels/air nozzles: 2 each -Dimensions: see photos Rsdpfxexwlxwo Ab Isbw -Number: 3x hangers available Price: per piece -Dimensions: 240/100/H55 mm -Weight: 0.7 kg/pc.

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Rjdpfx Abjdc Ipme Ijbw -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 Rbjdpfodc Iplsx Ab Ijw -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: used, 5tSWF Krantechnik GmbH Rsdpfodc A R Tsx Ab Ijbw

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm Redpfsvbh Rhsx Ab Isbw lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) Rjdpjvx E Raefx Ab Iobw • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig

Year of construction: 2013, condition: excellent (used), Robust and compact bridge saw with fixed bridge for cutting stone tiles and slabs up to 800 mm long: Special design of the beam for maximum cutting precision; Water collection tray with built-in water circulation system for cooling the blade; Robust and compact design. Roller conveyor front Roller conveyor rear Saw blade size: 350 mm Motor power: 2 KW Voltage: 230 Volt Weight: 173 kg Mobile Rbjdpfji Akvvjx Ab Iew Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2015, condition: used, functionality: fully functional, REGENERATIVE THERMAL OXIDIZER (RTO) system RELOX REGENUS 2040/2 for sale! Availability: November, 2025 Rjdpfx Abow Hb Ebj Iobw Layout in attachment below REGENERATIVE THERMAL OXIDIZER (RTO) Main Technical Parameters – Relox REGENUS 2040/2 (RTO) Production year: 2015 Max. exhaust air flow: 40,000 Nm³/h Thermal power (hot water exchanger): 1,000 kW Heat recovery efficiency: > 96% Oxidation temperature: ~800–850 °C Max. burner chamber temperature: 1,000 °C Gas burner power: ~600 kW (turn-down ratio ~1:5) Control system: PLC Hot water heat exchanger Installation dimensions (L×W×H): Approx. 7,100 × 5,250 × 6,300 mm Weight: ~36.2 t

Year of construction: 1997, condition: ready for operation (used), Overhead travelling crane (laufkrane) with 19 meter span, 2 units of 20 tons each and 3 units of 16 tons each, lifting height 10 meters. Rbjdpfx Absw S D Uuo Isw