Used Thermal Oil Furnace for sale (8,258)

Condition: good (used), Year of construction: 1996, BERTRANS HT594 THERMAL OIL BOILER Automatic vertical thermal oil boiler manufactured by BERTRANS, equipped with a WEISHAUPT modulating burner. TECHNICAL DATA Manufacturer: BERTRANS Kdjdpfx Aozvf Rkebner Model: HT594 Boiler type: Thermal oil boiler Configuration: Vertical Operation: Automatic Thermal oil volume: 6.01 m³ Maximum working pressure: 35 bar Manufacturing number: M1101009/IB Burner manufacturer: WEISHAUPT (2003) Burner model: WKG 3/0-A ZM Burner output range: 1,200–12,000 kW Burner serial number: 4,177,116

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Kdsdszutgkepfx Abnjr Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Kodjwtg Hdjpfx Abnjdr

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Kjdjw Hxgvepfx Abnodr Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Kjdoyivr Tspfx Abnsdr

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Kdjdpfx Abjht Hgnonor

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Ksdpfx Aeigruyjbnodr

Condition: good (used), Tricool Thermal oil heater Model: SHK509A Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile Kjdpfxsrwz N Is Abnsdr

Condition: used, Year of construction: 2020, machine/vehicle number: LF 4.3.2, - Brand: Logiudice Forni - Model: Steam LF 4.3.2 - Catalogue reference: LF-432 - Type: steam deck oven - Technology: annular tube - Number of decks: 4 - Number of mouth openings: 12 - Doors per deck: 3 - Door width: 620 mm - Baking surface: 17.95 m² - Chamber dimensions: 1860 x 2410 mm - Chamber height: 200 mm - External dimensions: 2420 x 3830 x 2680 mm - Weight: approx. 12,000 kg - Thermal power: 120,000 kcal/h - Thermal power: 139 to 140 kW - Electrical power: 1.5 kW - Energy: gas, oil, or wood - Origin: Italy Kodpfx Aey Du Eisbnodr - This Logiudice Forni oven (reference LF 4.3.2) is a professional Italian-made deck oven, designed for high-output artisanal bakeries.

Year of construction: 2024, condition: new, Horizontal Oil Quenching Furnace Kjdpfjt D Tkuox Abnjdr Technical details: Size range: 450x350x300 up to 1200x800x800 Load capacity: 100 kg to 1200 kg Transferring duration: maximum 29sec, to lower than 17sec Ultimate temperature: 1320°C Final Vacuum: 10-1/10-4 Pa Temperature Uniformity Survey (TUS): ≤±5 °C Pressure Rise Rate: ≤0.5 Pa/h Cooling gas pressure:

Condition: excellent (used), Year of construction: 2019, 322 USED IBIS Thermal Oil Ovens: Year of manufacture: 2019. EQUIPMENT: - 2 thermal oil deck ovens, 12 m² each - total 24 m². - 2 heating boilers, each oven has its own independent boiler. - Oil burner, can be gas. - Hot water tanks on each oven. - Bread loading and unloading system. TECHNICAL DATA: Ovens, 7 units: - 2 ovens, year of manufacture: 2019, - 5 ovens, year of manufacture: 2005, - Two-carriage ovens (width: 100 cm, length: 120 cm). OVEN EXTERNAL DIMENSIONS (in cm): - Width 167 cm, - Height 226 cm - Length 320 cm. EQUIPMENT: - 40 baking trolleys, - Heating boiler, - Weishaupt burner. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Kedpfx Aeyq Rq Hobnodr ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Kdsdpjkvni Aefx Abnsr Machine weight: 750 kg. Capacity: 250 kg/h in 600 liter oil

Condition: excellent (used), Technical specifications: Manufacturer: POLZENITH Model / Series: HO / SP / II Heating capacity: 800 kW Minimum calorific value of fuel: 3,800 kcal/kg Fuels: • Sawdust – automatic screw feeder • Wood chips – maximum edge length 30 mm • Piecewood – manual loading through an inspection hatch. Kedpfx Ajzl Tctsbnedr Operating parameters: • Heating medium: hot water (DHW) up to 100°C • Operating pressure: 2.5 bar • Test pressure: 6.0 bar (water test) Construction: • Horizontal, three-pass boiler • Flame-tube boiler • Boiler block manufactured in accordance with DIN standards. Weight: • Approximately 16.5 tons Dimensions: • Boiler length: approximately 2700 mm • Additional space for a dust collector: 1500 mm • Width: approximately 1900 mm • Height: approximately 4500 mm

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm Ksdpfjzvcknsx Abnsdr • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. Kdodpfxszrf Sas Abner All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pins ØShank Pin Distance Price: OQ70 60/60 280 330 €3,000.00 OQ80 90/90 345 510 €3,500.00 OQ80 90/90 353 515 €3,500.00 QO80 90/90 355 510 €3,500.00 OQ80 100/90 387 530 €3,500.00 OQ80 100/100 420 610 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 90/90 350 500 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 80/80 310 475 €3,500.00 OQ90 110/100 440 595 €18,000.00 OQ90 without mount €15,000.00 OQ90 110/110 470 590 €18,000.00 Verachtert Pins Ø Shank Pin Distance CW40 80/80 310 445 €2,000.00 Lehnhoff Pins Ø Shank Pin Distance HS21 80/80 465 333 €2,000.00 HS21 80/80 305 475 €2,000.00 Additionally, adapter plates available Liebherr Pins Ø Shank Pin Distance SWA 48 65/65 253 370 €2,000.00 Ksdsxhdh Sspfx Abnjdr SWA 48 80/70 350 420 €2,000.00 SWA 48 80/80 327 460 €2,000.00

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Kdedpfx Aszlud Eobner Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec.

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Kdjdpfsi Eg Nnjx Abnor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS Ksdpfx Aboi Eg Ncjnsdr -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm Kedpfx Absi Eg Nvenjdr -Weight: 29 kg

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Kdjded Sm Dispfx Abnjr Max temperature: 700 C °

Condition: as good as new (ex-display), High-definition HD generator for plasma cutting. From warehouse stock. Available for immediate delivery, subject to prior sale. A great opportunity. Kodpfsg Tcufjx Abnsdr

Condition: used, Year of construction: 2007, - Brand : Oil & Steel / Nissan - Type : Snake 2112 Smart - Year of manufacture: 2007 (first operation 2012) - Hours: 4.546 hours - Odometer: 79,776 km. - Weight: 3250 kg. - Drive: Diesel - Trailer: 2000 kg - Working height: 21 meters - Lateral reach: 12.8 meters Ksdpfjy Umfcsx Abnjdr - Lifting capacity: 200 kg. - Narrow + Wide stamping - Dutch license plate : 9-VXV-31 - APK: 22-10-2026 - Export license plate possible - Safety inspection possible - Aerial work platform book available - Maintenance history available - CE document available - Video on our website - Trade-in and transport possible *Type: Snake 2112 Smart * Construction year: 2007 (first commissioned 2012) * Hours: 4546 uur * Km. position: 79776 km. * Weight: 3250 kg. * Drive: Diesel * Lateral reach: 12.8 meters * Lifting capacity: 200 kg. * Dutch license plate: 9-VXV-31 * APK: 22-10-2026 * Working height: 21 meters

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Kdodpfx Aberivv Esnjr Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Ksdpfxe Sdrfj Abnodr space needed: 820 x 1220 x 930 mm weight: 750 kg