Used Thermal Analyzers for sale (1,432)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack Isdpfjzvcknox Abnetk • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz Itsdpfey Drl Hjx Abnek - Fuse: 6 A - Power rating: max. 600 VA - Software: STARe Software V16.30 - Operating system: Windows 10 - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK Itodjh Rawuspfx Abnsk 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Roche COBAS TaqMan + AmpliPrep Amplification Detector Manufacturer's description; all information is subject to change without notice. Automated real-time amplification and detection analyzer. A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automated sample transfer—from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® analyzer. Features Works with the COBAS® AmpliPrep Instrument and Docking Station for complete automation of sample preparation, amplification, and detection. Works undocked with the COBAS® AmpliPrep Instrument. AMPLILINK software provides a simple and efficient user interface for the custom-built Windows®-based PC included with the system. Automated and fully docked systems with COBAS® AmpliPrep/COBAS® TaqMan® HIV-1, HCV, and HBV tests are available. Benefits Higher throughput. Continuous operation maximizes laboratory productivity. 4 independently controlled thermal cyclers. Amplification and detection of RNA and DNA within hours. Quantification standard and closed tube format require no user interaction after sample loading. Reduces the risk of sample contamination. Optimizes workflow. Item condition: used, untested. Supplied as shown. Financing through our bank is also possible. komplett-konzept.leasingo.de Itsdpfou D D E Rsx Abnek Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Iedpfx Aszupvuebnjtk Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Iedpfoxzgw Asx Abnstk Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in.

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec. Ijdpfszlud Eex Abnetk

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Iodpfjzi Ihfjx Abnstk Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 400 mm Travel range Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 rpm Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Operating hours: 10,294 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of the XYZ axes Parameter backup function Retraction cycle for tapping without a compensating chuck Itedpfozul Tcjx Abnjk MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Threading without a compensating chuck M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycle G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Verification of travel limit before movement Verification of stored travel limit 1 Verification of stored travel limit 2 G22/G23 Customer-specific PMC Real-time customer macro

Condition: good (used), Year of construction: 1996, BERTRANS HT594 THERMAL OIL BOILER Automatic vertical thermal oil boiler manufactured by BERTRANS, equipped with a WEISHAUPT modulating burner. TECHNICAL DATA Manufacturer: BERTRANS Model: HT594 Boiler type: Thermal oil boiler Configuration: Vertical Iodpfx Abjzvf Rkjnstk Operation: Automatic Thermal oil volume: 6.01 m³ Maximum working pressure: 35 bar Manufacturing number: M1101009/IB Burner manufacturer: WEISHAUPT (2003) Burner model: WKG 3/0-A ZM Burner output range: 1,200–12,000 kW Burner serial number: 4,177,116

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Itjdpfx Aozutgkobnek Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Maximum speed: 75m/ minute Isdpfszt R Enox Abnotk Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Condition: like new (used), Exhaust gas analyzer, manufacturer: Testo, model: 300 Longlife, in new condition. Isdpfxjzvcbye Abnstk

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF Iodoxg Ndiopfx Abnotk - High precision:

Condition: excellent (used), functionality: fully functional, Rohde & Schwarz UPV Audio Analyzer with the following options: UPV-K1 UPV-K4 UPV-U2 Iodpfx Absx H Ucasnjtk UPV-B2 UPV-B3 UPV-B42 UPV-B48 Operating System: Windows XP #8410

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, For sale: Siemens ADVIA Centaur CP immunology analyzer, used only 6–7 months. The device is in excellent technical and visual condition, fully functional, with no defects. The analyzer is suitable for medical and clinical laboratories seeking high-precision and reliable immunological diagnostics. Key features: Manufacturer: Siemens Model: ADVIA Centaur CP Type: Immunology analyzer Condition: Used – like new (6–7 months in operation) Application: High-accuracy immunology testing Operation: Automated analysis delivering fast and reliable results Advantages: - High sensitivity and precision - Suitable for medium and large laboratories - Proven, well-established technology - Stable performance under heavy workload Reason for sale: The device was purchased for a laboratory that ceased operations about 6 months after acquisition; therefore, the analyzer is no longer in use and is offered for sale. Additional information: Upon serious inquiry, the following can be provided: Itjdpfx Absyhfl Honjk - Additional photos - Technical documentation - Serial information

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: Isdpfx Asygx Hnsbnotk X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Year of construction: 2022, condition: like new (used), Zebra ZE511 Thermal Transfer Print Engine Model: ZE51143-L0E0000Z Iedozpy Abjpfx Abnjtk Year: 2022 Brand new, unused, ex stores stock (open box)

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Ijdpszvdftofx Abnstk

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Itedszfp H Iopfx Abnsk

Condition: ready for operation (used), Year of construction: 2021, A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment. Itsdpfxjzli Urj Abnsk

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG TOC/TNb analyzer, multi N C 3100 Itsdpfx Aezh Iruobnok Model: multiNC3100 Condition: Used Technical specifications: 230V AC 50/60Hz 1000VA General: Operating temperature +10 to +35 °C (air conditioning recommended) Maximum humidity 90% at 30 °C Air pressure 0.7-1.06 bar Storage temperature +5 to +55 °C Humidity during storage 10-30% (use desiccant) Altitude (maximum) 2000 m Accessories: Documentation Power cord Software

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Itjdpfow Hxgvex Abnok Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Year of construction: 2011, condition: used, The LECO TC-400 ON analyzer is a highly precise laboratory instrument for determining the oxygen and nitrogen content in solid samples. This system is typically used in metallurgy, materials testing, research, and quality assurance, providing reliable elemental analysis for a wide range of inorganic materials. The TC-400 operates as an inert gas fusion analyzer (ON/O-N analysis) and enables: Determination of oxygen (O) and nitrogen (N) in solid samples Itjdpfx Abjzkaa Asnek Analysis of metals, alloys, ceramics, and powder materials Highly precise measurement through fusion extraction in a graphite crucible Automated sample loading (depending on the configuration) Evaluation via integrated analysis software Repeatable results for quality and process control Documentation and data management via TCWin Analysis Software (Version 4.24) Thanks to its robust LECO technology, the TC-400 offers stable performance, high measurement accuracy, and a proven analytical platform for demanding applications in research and industry.

Year of construction: 2022, condition: used, Empty weight: 135 kg Serial number: 280517 Power supply: 400 V three-phase, 60 Hz (without neutral) Rated electrical power: 60 kW (max ~60.7 kW) Rated current: ~88.5 A Isdpfxezvb Ire Abnstk Operating steam pressure: 7 bar Maximum allowable pressure: 8.5 bar Allowable steam temperature: up to 200 °C Listed weight: 135 kg Mounted on a metal frame with an overhead feed tank Punch-button emergency stop and control panel with indicator lights Connections with visible stainless steel braided hoses Additional marking on the enclosure: "CVE-80-2" Estimated footprint of the entire unit on the frame: ~120 × 90 × 200 cm (W × D × H) Visual condition: traces of surface corrosion on the bottom of the frame and a few scratches; appears to be in good overall condition Description generated using AI Online auction held following the closure of the Umiami research and development center in Villebon-sur-Yvette (91), which was dedicated to the development of plant-based food products under the "Swap Food" brand. This auction includes over 100 lots, notably featuring state-of-the-art laboratory and process development equipment: “Anton Paar” particle size analyzers and rheometers, a “Stable Micro Systems” texturometer, “Dohmeyer” cryogenic cabinets, “Hounö” and “Unox” ovens, a “Mettler Toledo” metal detector, an “Anritsu” checkweigher, "Sartorius" thermobalances, as well as numerous food preparation appliances, laboratory equipment, stainless steel furniture, shelving, computer equipment, and technical equipment. Auction organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.