Used Thermal Platesetters for sale (1,412)

Condition: used, Year of construction: 2010, A reflow soldering oven with nitrogen operation is offered. Power: 70kW. Nitrogen consumption: approx. 21m³/h. Cooling: 20l/min at min. 2bar. Exhaust air: 400m³/h. Inspection possible by arrangement. Dodo Ahq Nkspfx Aiiecp

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Dsdpszvcknofx Aiiecp Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Dcjdjh Rawuepfx Aiijp Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Dedpfszzpwrex Aiiecp Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Year of construction: 2010, condition: ready for operation (used), A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible. Dcjdpfx Aoy N Uxaoiijp

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec. Djdpfx Aijzlud Esiocp

Condition: used, Year of construction: 2012, This MIWE Thermo Express rack oven system consists of 2 ovens, each with 9 racks, thus offering excellent capacity for medium-sized bakeries. The ovens are heated with thermal oil, which provides excellent baking quality that is unparalleled. The ovens also have an automatic loading and unloading system, making baking a breeze. consisting of: 2x MIWE Thermo Express rack ovens 9 racks per oven Total baking area: 68.4 m² MIWE Athlet B330S automatic loading and unloading system Including exhaust system at the loader Central control unit Heating boiler central unit HKZ350 Dcjdpe Ahwvbjfx Aiiep

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Dedpjzi Ihfjfx Aiijcp Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: good (used), Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 377/2019, cutting width (max.): 1,000 mm, type of input current: three-phase, input current: 25 A, working width: 1,050 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, TTR and hot foil slitter/rewinder. TTR1000 Material width: max 1050mm Max unwinding diameter: 700mm Max rewinding diameter: 150mm Max jumbo core length: 1100mm Rewinding shafts with tooling: 1 inch and 1/2 inch Dcsdpfx Aiez R Rdreiep Slitting system: razor blade manual set 2 rewind turrets (upper and lower) for easy change The machine is generally in good condition. It has tension control issues on one of the shafts, likely related to the magnetic powder clutch. The machine is still installed and ready for production, so we can arrange a live demo.

Condition: used, Year of construction: 2008, functionality: unexamined, Model: Magnus VLF MT358 as shown in the picture excluding any other items shown in the picture Dcodpfxs Ahrvwo Aiijp Note: If technical or electronic devices are included, their functionality has not been tested. Note: Pallets are included as part of the item, if shown in the picture. This Kodak Magnus VLF MT358 CTP plate setter is being auctioned online in our industrial auction / machine auction “Closure of a well-known printing company: printing presses, extensive printing press accessories, production technology, spare parts, conveyor technology, workshop and operational equipment, as well as storage and office equipment”. You can find this and many other items from the fields of machinery, printing press accessories, and workshop equipment on our platform.

Condition: used, Vötsch Temperature shock chamber / Thermal shock chamber Vötsch ShockEvent T/120/V2 temperature shock chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-checked – water-cooled version with 120-liter test chamber volume For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cyclical testing, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system has a hot chamber and a cold chamber. The test item is transported between the two temperature zones using a mobile test trolley. This allows for rapid temperature changes to test the thermal resistance. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of manufacture: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled version Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test item between the hot and cold chambers Temperature change rates according to manufacturer's brochure: Heating rate, hot chamber: approx. 18 K/min Cooling rate, cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the basic unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Mobile test item trolley Digital control and operating unit Temperature control Water-cooled version Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chambers Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Dcjdpfe Ah Shwox Aiiop Test item support in the mobile trolley Application areas: Temperature shock testing Thermal cyclical testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to pictures Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures The table shown in the photos, or any other items not explicitly mentioned, are not part of the sale. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. Dcjdpoz Hngmjfx Aiisp The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Year of construction: 2004, condition: used, functionality: limited functionality, machine/vehicle number: ST 5151, We offer this used Envirotec Envitherm 50.0/3 W thermal afterburning system, manufactured in 2004. Manufacturer's serial number: ST 5151 Year of manufacture: 2004 Three-chamber operation Exhaust gas volume: 50,000 Nm³/h Combustion chamber temperature: 800°C Djdpfx Aioz Stbzeiecp The system essentially consists of three reactor vessels, which are filled with honeycomb bodies as heat storage. The system is equipped with two hot bypasses and an energy recovery system. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel Dodpfez Ai Tpjx Aiiocp - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Dodez Dtmaopfx Aiijcp Machine weight: 2 tons. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. MACHINE IS READY TO WORK. Dedpfx Aozquq Asiijcp

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Year of manufacture (deck oven): 2009 Year of manufacture (rack oven): 2011 EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) - HK 200 heating boiler - Trolleys for rack ovens The price is a net price. Pais options available: transport. Dedpfx Aezxp Dyoiiocp Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: NETZSCH TDW 4240, For sale is a used NETZSCH TDW 4240 hot box test chamber from our testing center. This system is used to determine the thermal transmittance or thermal transmittance coefficient (U-value) of components and structures under defined temperature conditions. Dcodpszwf T Iefx Aiiop Typical applications: Windows Doors Facade and wall elements Panels and sandwich structures Other building envelope components Corresponding test openings are available for testing windows and doors. The system is particularly suitable for testing laboratories, research and development facilities, and manufacturers of windows, doors, facades, panels, and other construction products who wish to investigate the thermal properties of their products. Due to a realignment of our testing capacity, the hot box is being sold and can be acquired under very favorable conditions. Dismantling and transport: The system is currently located at our testing center. We would be happy to assist the buyer with dismantling, loading, and organizing the transport, as well as answer any questions regarding re-installation, and we can work together to find a suitable solution. An on-site inspection of the system is possible by appointment. We will gladly provide further technical information, photos, and documents upon request.

Condition: excellent (used), Year of construction: 2009, Single Cassette Autoloader SA-L 8000 Extra Cassette für SA-L 8000 PLATE STACKER PST 480C Plate Size Max: 1,160 x 940 mm Plate Size Min: 450 x 370 mm 20 plates/hr at 2,400 dpi Dcjdszqudcjpfx Aiisp

Condition: used, Venjakob RNV 2.0 Exhaust Gas Purification System The system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas supply (the auxiliary burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely decompose into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The purified, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, very little additional gas needs to be supplied. System data Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Manufacturing number: 15212 Dedpfx Aszrl Ibsiijcp Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / heating value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 - 1,500 dPa Max. combustion chamber temperature: 850 °C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Dcedpfx Aiozutgkjisp Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Condition: excellent (used), Year of construction: 2015, 537 USED Shop, confectionery, electric oven Wachtel Piccolo. Dsdps Aibgxofx Aiijcp EXTERNAL DIMENSIONS (in cm): - W: 98 - L: 95 (135 including hood) - H: 215 INTERNAL DIMENSIONS OF THE BAKING CHAMBER (in cm): - W: 60 - L: 48 - H: 13.5 TECHNICAL DATA: - year of manufacture: 2015 - power: 7.36 kW - power supply: 400V AC/3Ph/N/PE/50Hz Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: good (used), Year of construction: 1996, BERTRANS HT594 THERMAL OIL BOILER Automatic vertical thermal oil boiler manufactured by BERTRANS, equipped with a WEISHAUPT modulating burner. Dcedozvf Rkjpfx Aiisp TECHNICAL DATA Manufacturer: BERTRANS Model: HT594 Boiler type: Thermal oil boiler Configuration: Vertical Operation: Automatic Thermal oil volume: 6.01 m³ Maximum working pressure: 35 bar Manufacturing number: M1101009/IB Burner manufacturer: WEISHAUPT (2003) Burner model: WKG 3/0-A ZM Burner output range: 1,200–12,000 kW Burner serial number: 4,177,116

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance Dodpfx Aioxx Tp Hoiscp • Process started by a button on the control panel • Digital temperature regulation • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Immersion depth: 220 mm Cycle time: 3–5 sec Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 Djdpfx Aezizkyoiiocp CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.