Used Thermal Analyzers for sale (1,413)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: Fpjdpfx Asy Hkd Hjd Iji - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone. Fodpfx Adjzizr Ro Ijpi

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: Fjdpeziznfsfx Ad Iepi - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: Fpedpozizk Hofx Ad Ioi - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: used, CIP system comprising three 20 hl stainless steel tanks for acid, lye and caustic soda. The two lye tanks are thermally insulated. Additional title: 3-tank system for cleaning the brewhouse Fsdpfx Adszizfds Ispi Vessel volume each: 2000 l Length: 5,8 m Material: vessels from stainless steel Position: vessels standing on 3 feet each Features: 3 CIP tanks (2 of which are insulated); feed pump; chemical dosing system; 2 filter cartridges in the pipeline; conductivity measurement; pneumatic valves; control cabinet; pipework

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) Fodpfjzizdtex Ad Ispi SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Fpjdpfxjziyz Re Ad Ioi Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used MRT 3503 R Rotational Molding MachineTechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing. Its robust structure and precise motion control make it suitable for demanding production environments in industrial packaging and beverage production support, including integration upstream of filling and labeling equipment within a used bottling line or second hand production setup. The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integra... Fpjdsziyy Hepfx Ad Iei

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Fsdpfjziycbjx Ad Ijpi Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Fjdpfx Adeziyb Re Iopi Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Brabender Model: 920000 Brabender AQUATRAC® Station – Moisture Analyzer – Laboratory with Precisa Analytical Balance 0.1 mg – 120 g For sale is an AQUATRAC® Station by Brabender Messtechnik – a professional laboratory device for precise determination of water content in powders, granulates, and other solid materials. The device is ideally suited for quality assurance, research, and production, and is used worldwide in industrial and laboratory settings. Features: • Precise thermogravimetric moisture measurement • Integrated touchscreen • Internal data storage • USB and Ethernet interfaces • Robust industrial/laboratory construction Technical data: Model: 920000 Year of manufacture: 2019 Mains voltage: 85–265 V AC Frequency: 47–63 Hz Power consumption: approx. 0.6 kW Connections: 3× USB, Ethernet Dimensions: approx. 60 × 45 × 35 cm (W×D×H) Weight: approx. 30–35 kg Precisa Analytical Balance 0.1 mg – 120 g Description: For sale is a high-precision analytical balance from Precisa (Switzerland), Fodpfx Ajzix Ngod Ispi 321 LS Series / Type 120A. The balance is ideally suited for laboratories, pharmacies, research, industry, or education. Thanks to the enclosed glass draft shield, very precise and stable measurement results are possible – even for the smallest weights. Technical data: Max weighing range: 120 g Readability: 0.0001 g (0.1 mg) Minimum weight: 0.01 g Digital display Tare function RS232 interface Power supply: 12 V DC / 6 W Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. Fodpfozixucox Ad Iepi The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: used, mileage: 164,000 km, power: 130 kW (176.75 HP), first registration: 12/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,154 mm, total width: 2,040 mm, total height: 2,590 mm, loading space height: 1,820 mm, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW Crafter 35 4Motion (all-wheel drive) panel van, medium wheelbase, high roof L2H2, with above-average equipment for trades and businesses, e.g. as a service vehicle / workshop vehicle. Workshop / shelving system Sortimo (similar to Aluca Bott, Würth - details see below) LED headlights Automatic transmission (8-speed) All-wheel drive (4Motion / 4M / 4WD / 4x4) Tow hitch, 3.0 t Heated windshield Auxiliary heater / parking heater, programmable and with remote control Seat heating on both sides 2-zone Climatronic automatic climate control with pollen filter Driver's seat, ErgoActive suspension seat with massage function, adjustable driver's weight Passenger seat, swivel seat, comfort version Both seats with fold-out armrests, adjustable in several ways: - Seat height, seat tilt, backrest, lumbar support (electrically adjustable) Multifunction steering wheel Driver assistance systems: - Driver Assistance Package 3 - Park Distance Control front, rear and side, optical and acoustic display - Rear view camera - Park Assist (self-steering) - Blind Spot Assist - Parking exit assistant - Front Assist ambient monitoring system with City Emergency Braking function - Cruise control, adaptive or speed limiter - ACC Automatic Distance Control "follow to stop" incl. speed limiter - Traffic sign recognition - Lane keeping assistant - Driver fatigue detection - Hill start assist - Side wind assist - Trailer stabilization - Brake assist (HBA) - ABS, ASR, ESP - Automatic headlight control - Automatic windshield wipers Multifunction steering wheel Audio-navigation system Discover Media (touchscreen color display) - Radio (FM/AM), CD player (CD player, SD slots in the glove compartment) - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - Mobile Online Services Car-Net - App-Connect (Android Auto and Apple CarPlay) - Voice control (for radio, navigation, media, telephone) Multifunction display Plus / On-board computer Electrical package 1: - Electric windows - Exterior mirrors electrically adjustable, heated and foldable Central locking with remote control Fog lights with cornering lights Undertray for improved CW value 2nd battery with battery monitoring 230V / 1000W voltage converter Fpsdpjzcuuyefx Ad Iei Glazing in the first row, on both sides, tinted Sliding door, cargo area, right side, with glazing Rear hinged doors, with tinted glazing, opening angle 180 degrees Wheelbase 3640 mm High roof Truck registration N1, Van Steering wheel adjustable Storage compartment under the headliner at the front Entry handles on A and C-pillars Thermal protection glazing Cargo area divided into two sections, partition wall located behind the sliding door. Cargo area equipment, front section: Shelving system Sortimo. On the left side: workbench with 7 drawers. On the back: cabinet with 2 cabinet compartments, storage compartments and 5 drawers. Wooden floor. LED lighting. 230V / 1000W voltage converter. Cargo area equipment, rear section: Right side: Shelving system Sortimo with storage compartments and 7 drawers. Left side: wheel arch lining with storage compartment. Wooden floor. Walls lined. Ventilation and air intake. LED lighting. Cargo area dimensions (approximate): Front section: - Length 115 cm - Height 182 cm Rear section: - Length 170 cm (bottom), 163 cm (middle/top) - Height 182 cm Maintenance history from leasing documents / and VW 07.20 / 44,469 km: Longlife inspection 07.21 / 72,363 km: Service 1 + Longlife inspec

Condition: excellent (used), Thermo Scientific CryoMed 7453 – Controlled Rate Freezer Condition: Tested, fully functional, very well maintained. Includes: Two cryo aprons and one pair of cryo gloves. Used in laboratories, clinics, and biobanks for standardized cryopreservation of cells, tissues, and biological samples. Ideal for stem cells, blood components, IVF, and sensitive cell lines—any application where reproducible freezing curves and complete documentation are essential. The Thermo Scientific™ CryoMed™ controlled-rate freezer features an integrated control system (including freezing chamber, microprocessor control, and printer—all in a compact benchtop unit) that allows you to adapt multiple freezing profiles to specific protocols. Features • Chamber: 34 litres, front-loading, 304 stainless steel • Temperature range: +50 °C to –180 °C, programmable cooling rates down to below 0.1 °C/min • Six factory-set freezing profiles + ten freely programmable profiles • Precise control: programmable cooling rates • Integrated thermal printer for complete documentation • Type-T thermocouples for real-time recording • Comprehensive alarms (thermocouple break, heater failure, temperature limits, power failure, running/completed programs) • External dimensions (W × D × H): 95.8 × 53.8 × 51.8 cm • Internal dimensions (W × D × H): 33 × 30.5 × 33 cm • Weight: 72.6 kg • Power supply: 230 V / 50 Hz, 5.5 A • LN₂ connection: 0.5″ flare hose (1.8 m), supply pressure approx. 1.5 bar Scope of Delivery • CryoMed 7453 freezer Fsdpfjwpvfbjx Ad Iepi • 2x ThermoFisher Cryo-Apron Thermoshield • 1 pair ThermoFisher Cryo-Gloves • Operating manual (PDF) Inspection on site in the Basel area is possible by arrangement. We ship worldwide, please inquire. If interested or if you have questions, feel free to contact us.

Condition: excellent (used), For sale: a Tünkers roller laminator designed for the uniform application of adhesive to paper, cardboard, corrugated board, and other flat materials. This machine is used in bookbinding facilities, printing houses, packaging production plants, and during laminating and coating processes. Fpedpfx Aeziwxysd Isi The machine is equipped with a Hitachi X200 frequency inverter, which allows for smooth adjustment of the roller speed and adaptation of the operating parameters to the type of material being processed. Its robust, industrial design and precise roller arrangement ensure even distribution of adhesive across the entire working width. Technical data: Manufacturer: Tünkers GmbH Country of manufacture: Germany Type: roller laminator / adhesive application machine Electric drive Speed control via Hitachi X200 frequency inverter Motor with PTC thermal protection Metal work table Adjustable roller pressure Machine number: 12/201118/28 Applications The device is intended for: applying adhesive to paper and cardboard, laminating paper onto corrugated board, laminating materials, gluing veneers, packaging production, bookbinding operations, printing applications. Included in the set: Tünkers roller laminator, Hitachi X200 frequency inverter, wiring, components visible in the photos. Condition The device is used and shows normal signs of wear. It is sold in the exact condition and with the complete set of components as shown in the photos.

Condition: used, mileage: 186,453 km, power: 75 kW (101.97 HP), first registration: 02/2014, fuel type: diesel, empty load weight: 2,124 kg, maximum load weight: 676 kg, overall weight: 2,800 kg, tire size: 205/65R16C, axle configuration: 4x2, wheelbase: 3,400 mm, next inspection (TÜV): 03/2026, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 6, loading space length: 2,143 mm, loading space width: 1,913 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, electronic stability program (ESP), onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, air conditioning, radio, switch 5, ABS (anti-lock braking system), traction control (ASR), tow bar ball head, lashing eyes, storage box, environmental badge green Wheelbase: 3400 mm Body: flatbed, 6-seater ESP, airbag driver and front passenger, power steering, electric windows, air conditioning, radio central locking, heat protection glazing, pollen filter, radio/CD player with MP3 playback function, mud flaps front and rear, electr. Convex exterior mirrors, Convex exterior mirrors, left, Convex exterior mirrors, right, Rubber floor covering in driver's cab, Window in load/vehicle compartment: - fixed, rear left, Window in load/vehicle compartment: - fixed, rear right, Body/construction: Flatbed crew cab, Engine 2.0 ltr. - 75 kW TDI, Non-smoking package, Pollen filter, Wheelbase 3400 mm, Low-emission in accordance with Euro 5 emissions standard, Seat cover/upholstery: Leather, Seats in cab: Double passenger seat, Seats in cab: Height-adjustable driver's seat, Seats in cab: Adjustable driver's seat, Seats in load/vehicle compartment: 1.row, 3-seater bench seat (rigid), daytime running lights, thermal insulation glazing, gross vehicle weight 2.80 t ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fpodsvhnbgepfx Ad Iei

Condition: used, mileage: 32 km, power: 110 kW (149.56 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,531 mm, total width: 2,474 mm, total height: 2,740 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 19087---- Subject to errors and prior sale! Fjdpfoy Tr Aqox Ad Ijpi SPECIAL EQUIPMENT * Battery: AGM deep-cycle high-performance battery - 2 HB AGM batteries * Bi-xenon headlights with static bend lighting, LED daytime running lights * Windows, 2nd row of seats: Sliding windows, right and left * Ford audio system with 12-inch multifunction display and Ford SYNC4 - radio, DAB/DAB+ - FordPass Connect incl. live traffic information, Wi-Fi hotspot - audio remote control on the steering wheel - Bluetooth, USB port, hands-free system - emergency call assistant - Android Auto and Apple CarPlay - advanced voice control * Programmable battery monitoring * Headlight dipped beam with static cornering light * Interface plug * Seats: rear seats removed * Seat package 27: 4-way electrically adjustable driver's seat - Passenger single seat - Armrest inside - Lumbar support - Seat heating driver and front passenger - Seat cover: fabric * Technology package 13: Heated windscreen - Windscreen wipers with rain sensor - Parking Pilot system front and rear, additionally with side sensors - Emergency Brake Assist, active (radar-based) - Lane Assist with drowsiness warning system and Highbeam Assist, additionally with lane departure warning and lane departure warning systems Headlight Assist with day/night sensor - Blind Spot Assist - Adaptive cruise control - Reversing camera - LED downlight - Front fog lights - Electrically adjustable, folding and heated exterior mirrors - Automatic air conditioning * Thermal insulation glazing, medium tinting level * Conversion KTW: NOVARIS basic equipment (basic electrical wiring - laying of empty conduits - preservation and underbody protection) - gray wooden floor - 230V system with priority circuit for inverter - central electrics with automatic air conditioning - NOVARIS roof ventilator - Comet LED beacon - Hänsch tonalnage with city/country circuit - Air4D auxiliary heating - preparation for analog and digital radio - wall-mounted folding seat with city/country switch digital radio - wall-mounted folding seat with seat sensor - Ohlendorf intercom system - Börde step - stretcher support incl. fixing system - 2600x620 drive-on ramp FURTHER EQUIPMENT * 1 battery * Airbag driver and passenger side * ABS with electronic brake force distribution * Electrically adjustable and heated exterior mirrors * Battery runtime, programming of battery runtime to 10 min * Rubberized floor (in driver's cab and passenger compartment) * On-board computer with fuel consumption and mileage information * Complete headlining * Double-wing rear door with 180° opening angle (with window) - with heated rear windows * ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Roll-over protection - Emergency brake assist incl. emergency brake light * Windows, 2nd row: fixed side windows, right and left * Electric windows with quick-down/-up function for driver's side * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Generator, high-performance version * Cruise control system * Glove compartment with lockable lid * Interior lighting with delay switch with front reading lamps * Fuel tank 70 l * Steering wheel: imitation leather * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency Brake Assist active - (camera-based) * Emergency call assistant * Park Pilot system front and rear * Particulate filter: diesel particulate filter * Wheel

Condition: used, mileage: 16,745 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 61,500 mm, total width: 25,600 mm, total height: 29,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (at the following telephone number). Mercedes-Benz Atego 1018 A 4x4 Flatbed with Cover Fpodpfx Aozk S Skod Iji !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, ring gear 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake 2-line, B56 Coupling head at the front, for air replenishment, B65 Compressed air dryer, heated, BB6 Drum brake on front and rear axles, BB9 Pipe rupture protection for braking system, C42 Stabilizer, rear axle, under frame, CC9 Deletion of protection device, lateral, CL9 Steering LS 6/LS 8, CR4 Mounting parts on the frame/hole grid, CU0 Underrun protection, foldable, rear (Meiller), D15 Roof hatch, swiveling, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, E30 Battery main switch, 1-pole, E31 Power socket, E40 Trailer socket, 7-pole, E41 Trailer socket, 12-pole, E55 Socket for trickle charging, 24 V, E70 Intercom system, with socket, NATO, EC6 Trailer socket, 15-pole, EM8 PSM, body and trailer CAN, ISO 11992, ES8 Auxiliary socket 24 V/15 A, cab bracket, F07 Cab double cab, steel, F20 S-cab, 180 mm extended, F30 Cab tilting hydraulics, FE5 Electric window lift, driver and passenger door, FN1 Distributor cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirror, electric, driver's side, FV7 Pre-installation, installation kit, FW2 Deletion of immobilizer (transponder), FX7 Front mirror aerodynamic, front, GC5 Transmission G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, HH1 Hot water auxiliary heater, Eberspächer D5W S, I42 Tires 365/80 R 20 front axle, IA1 Wheel arrangement 4x4, IB4 Model series LKN, IC1 Flatbed chassis, ID1 Leaf spring suspension, IL1 Domestic (Germany), IL8 Left-hand drive version, IP6 Wheelbase 3260 mm, IU5 10.5-ton vehicle, IX4 In-line engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EC, speed sensor + additional recording, ADR, JK3 Combination instrument, graphic display, fuel economy meter, JZ1 Tachograph manufacturer VDO, K40 Fuel tank lock, K45 Strainer, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KBCA Air reservoir and air dryer mounted offset in the frame, KCAH Steel bumper, KCR5 Frame head reinforced for special attachments, KCUN Overhang change 1135 mm, KCYQ Towing eyelets front and rear, screwable at the front (not according to STANAG), KD6 Exhaust gas monitoring for nitrogen oxide (NOx), KE8 On-board diagnosis 1.0 with NOx control, KFKV Cab tilting pump relocation, KFMP Cab installation package for BWFPS, KG0 Stainless steel silencer with SCR catalytic converter, KJ1 Main silencer right, lateral on the frame, KK45 Strainer for fuel tank filler neck, KKSN Main tank right 200L, steel, (540x620x620), KKVD AdBlue tank mounted offset to the left, KLSH Protective grille for taillights, KLSJ Protective grille for turn signal lights, KMJN Compact air filter standing behind the cab, KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQ29 Trailer or towing hitch, manufacturer RINGFEDER, KQBA Automatic hitch; size: K2 D/UN763 (for towing lugs acc. to VG740, KTBB Weight variant 11 t (6.1/6.2), KZYC Painting of unpainted parts, L72 Electrical system, for third-party body, M89 Intake air preheating for cold start, MB1 Engine b

Condition: used, mileage: 28,950 km, power: 330 kW (448.67 HP), color: red, driver cabin: sleeper cab, gearing type: automatic, total length: 110,500 mm, total width: 25,500 mm, total height: 40,000 mm, loading space length: 66,900 mm, loading space width: 24,900 mm, loading space height: 26,500 mm, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, - Air suspension, rear - Air suspension, front Fpjdpozk S R Tsfx Ad Isi For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone). Mercedes-Benz Actros 3645 LL 8x2/6 flatbed/curtainsider with lifting roof and rear crane Crane: Hiab X-Hipro 358 E-5 with 5 hydraulic extensions, jib 70X-3 with 3 hydraulic extensions, pallet fork with swivel motor, 4-point outriggers, remote control, load chart: see photos Hydraulically adjustable roof A1A front axle, air-sprung, A1E front axle, 9.0 t, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4U trailing axle, 8 t, steered, unladen, A5B axle ratio i = 2.533, B1B electronic braking system with ABS and ASR, B2A disc brake, on front and rear axles, B2X parking brake, electronic, B3H secondary water retarder, B5D trailer stability assistant (TSA), C3P wheelbase 6100 mm, C4F frame overhang 2250 mm, C6U additional stabilizer, rear/trailing axle, D0L smoker's package, D0S compressed air connection, in the cab, D1C driver's air suspension seat, comfort, D1N co-driver's functional seat, D3Q seat cover, velour, D4Y sun visor, side, driver's side, D6G automatic climate control, D7A additional thermal insulation, D8A roof hatch/ventilation flap, roof, E4W starting assist, speed limitation 30 km/h, E5H switch for night driving lights, E7F cable remote control for air suspension, F1B M cab ClassicSpace, 2.30 m, tunnel 170 mm, F3B cab mounting, comfort, steel-sprung, F5L exterior sun visor, transparent, F6C windshield tinted, F6I front mirror, heated, F6L main mirror, with maneuvering position, co-driver's side, F6R air horns, cab roof, F8E locking system, with central locking, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0R transmission torque arms, optimized for installation, G0T Predictive Powertrain Control, G2B transmission G 211-12/14.93-1.0, G5A single-plate clutch, G5G Mercedes PowerShift 3, I2F tires tubeless, 315/70 R 22.5 rear axle, I2M tires tubeless, 385/55 R 22.5 front axle/front lift axle/trailing axle, I6I vehicle production facility Wörth, I6X air suspension, rear axle, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K speakers, 2-way system, J2U navigation system, J2Y CB radio, 24 V, J3U prerequisite Fleetboard Manager App, J3V Truck Data Center 7, J6C multimedia cockpit, interactive, J6Y Remote Online, J6Z pre-wiring Mercedes-Benz Truck App Portal, J8Y pre-wiring for Truck Data Center 7, J9D pre-wiring for toll collection, J9P pre-wiring and display for up to 4 cameras, JA4B front lift axle, 7.5 t, steered, unladen, JAAT distance between front lift axle and rear axle 1450 mm, JCLM steering system CTT, electro-hydraulic, JCRB frame adaptation for installation of front lift axle, JKRA tank, offset to dimension 2550 mm, JKVJ fuel main tank from left to right, JS9Z deletion, stability assistant, JWCK weight variant 35.5 t (9.0/7.5/11.5/7.5), JZAF vehicle conversion to 8x2/6 with front lift axle, ENA, K0T main tank, left, K1E tank 390 l, left, 650 x 565 x 1250 mm, aluminum, K3V AdBlue tank 60 l, left, L1A Bi-Xenon headlights, L1D automatic high beam/low beam and turning light, L1I fog lights, LED daytime running lights, L1P LED rear lights, L2H side marker lights, flashing, L3Z headlight cleaning system, L9C pre-wiring, additional headlights, roof, L9G pre-wiring, work lights, rear of cab, M0C underguard, against dust swirling, M0E torque increase, in 12th gear, M0Q noise regulation, according to UN-R 51.03 level 2, M3B engine OM471, R6, 1

Condition: used, mileage: 93,073 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,640 mm, first registration: 03/2022, loading space length: 3,450 mm, loading space height: 1,720 mm, loading space volume: 9 m³, fuel tank capacity: 75 l, emission class: euro6, color: black, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, trailer coupling, = Additional options and accessories = - Adaptive Cruise Control - Active Lane Keeping Assist - Assistance Package (front and rear parking sensors, power-folding exterior mirrors, rearview camera, blind spot monitoring) - Wooden cargo floor - Height-adjustable driver's seat - Height-adjustable driver's seat - Comfort Package (multifunctional steering wheel) - Comfort seats - LED headlights - Lumbar support - Parking assist - Sliding door on the right side - Heated front seats - Lane Keeping Assist - Start/Stop system - Winter Package (heated windshield washer system) - Airbag Package (front and rear head airbags, front side airbags) - Airbag Package (front and rear head airbags, front side airbags) - Alarm system - Alarm system Class I - Driver alertness system - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Remote central locking - Hill-hold control - Dealer maintenance - Collision mitigation by braking - Collision avoidance system - Comfort Package Plus (leather steering wheel, steering wheel heating, multifunctional steering wheel) - Light and Sight Package (adaptive fog lights, automatic headlights, rain sensor, headlight assistant) - Front center armrest - Multimedia Package (Apple CarPlay + Android Auto, Bluetooth phone preparation, multimedia preparation, voice control, connected services, WiFi hotspot) - Multimedia Package (Apple CarPlay + Android Auto, Bluetooth phone preparation, multimedia preparation, connected services) - Navigation Package (Apple CarPlay + Android Auto, Bluetooth phone preparation, multimedia preparation, voice control, connected services, WiFi hotspot) - Radio with DAB - Service booklet available (digital) - Safety Package (adaptive fog lights, passenger airbag, front and rear head airbags, tire pressure monitoring, front side airbags) - Immobilizer - System for preventing secondary collisions - Thermally insulated glass - Traffic sign recognition - Adjustable steering wheel - Partition = Additional information = General information Number of doors: 5 Model year: 2017 Technical information Torque: 410 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 8 gears, automatic Dimensions Length/Height: L3H2 Weights Unladen weight: 2,092 kg Payload: 1,408 kg GVW: 3,500 kg Interior Upholstery: Skai Maintenance, history and condition Booklets: Available (dealer maintenance) Fodpfx Aezk Iz Uod Ispi Number of keys: 2 (2 remote controls) Product safety EU responsible: M.A.N. Truck Bus B.V. Postbus 72 3800 HD Amersfoort, NL

Condition: new, External dimensions L x W x H: 1930 x 2080 x 2280 mm Configuration with 2 independent cells, each containing 2 trolleys, for a total of 4 trolleys. Additional dividers included for dividing into multiple cells. Equipped with 2 solid, single-door doors. Fjdpfezk Hk Isx Ad Ijpi 2 integrated 720 x 150 mm wall evaporators. 2 refrigeration units supplied, type CAJ 9513 or UN 9232, using R452A refrigerant. External height without floor: 2115 mm Doorway height: 1800 mm Dimensions suitable for 600x800 mm trays Compatible trolley dimensions: 700 x 890 x 1870 mm 2 independent cells with autonomous cycle management Capacity: 2 trolleys per cell (4 trolleys in total) Temperature range: -10°C to +35°C Modular structure without floor (installation on a perfectly level floor) Insulating panels, 60 mm thick, with high thermal performance Interior finish: food-grade aluminum Exterior finish: reinforced aluminum 2 wall evaporators, 720 x 150 mm Heating power: 2200 W Heater resistance: 80% 2 independent refrigeration units Position of units: low Environmentally friendly refrigerant: R452A Professional electronic control: Control Panel 2008 V2 Control panel type: cabinet Electrical supply: 220 V Single-phase – 16 A – 50 Hz 2 solid doors, 895 x 1360 mm Opening: 1 door per door Water drain: external diameter 32 mm Water inlet: 1/4 inch connection (above the chamber) Remote installation possible Delivered disassembled for easy access.

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, color: white, number of seats: 13, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Opel Movano identical to Ducato / Jumper / Boxer Front low-floor pre-run vehicle, base vehicles available - Phonic and thermal insulation of passenger compartment - Glass gray / black in original cut-out - 13 sleeper seats plus passenger single seat or dental cabinet) + driver's seat - 2 folding seats (folding seats count as standing places) - 7 standing places / total capacity 20/21 - Wheelchair space / stroller space in special use area - Convector heating in passenger compartment - Auxiliary heating - Air conditioning in passenger compartment - Multi-stage night lighting white / orange - Roof hatch - Double-width passenger door with manual wheelchair ramp - Electric step at original sliding door - Reinforced rear axle, permissible total weight 4500 kg Base vehicle with air conditioning, manual transmission, PDC with reversing camera, auxiliary heating, radio with hands-free system, multifunction steering wheel, ... Wheelbase 4035 mm Total length 6223 mm Height 2522 mm Width 2050 mm Fedpfxezbqacs Ad Iepi Optional: - Extra extra large windshield - Automatic transmission then engine 130 kW - Air heater Special equipment: Airbag driver/passenger side, Cool & Sound package, electrical interface for additional conversions, driver assistance system: park pilot system with reversing camera, light package 1, tire repair kit, seats in cab: adjustable passenger single seat, seats in cab: driver's seat heated Additional equipment: Exterior mirrors, single tires on 2nd axle / rear axle, driver assistance system: crosswind assistant, generator 185 A, rear wing doors with glazing (opening angle 180 degrees), high roof H2, permissible total weight 4.5 t, body/superstructure: high box van, body variant: vehicle length L4, body variant: high roof (H2), fuel tank: 80 liters, steering column (steering wheel) adjustable, headlight range adjustment, model update, engine 2.3 liters - 121 kW CDTI, pollen filter, long wheelbase, low emissions according to Euro 6d-TEMP emissions standard, sliding door loading/passenger compartment right, side marker lights, vision package, steel rims 6.5x16, LED daytime running lights, permissible total weight 4.5 t, speed limit 90 km/h Net export possible All information without guarantee These are German vehicles / no re-imports. Orders can also be placed for Citroen/Peugeot/Fiat Ducato or Opel Movano. We make shipment worldwide

Condition: used, mileage: 67,154 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,640 mm, first registration: 09/2021, fuel tank capacity: 75 l, CO₂ emissions: 223 g/km, emission class: euro6, color: grey, number of seats: 3, number of previous owners: 3, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, = Additional Options and Accessories = - Sliding door on the right side - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Hill-hold control - Wooden cargo bed - Height-adjustable driver's seat - Comfort seats - Alloy wheels - Lumbar support - Metallic paint - Front center armrest - Multimedia capable - Radio - Sidebars - Start/Stop system - Immobilizer - System for preventing secondary collisions - Thermally insulated glass - Partition = Additional Information = General Information Number of doors: 5 Model range: Sept. 2019 - Dec. 2022 Cab: single Technical Information Torque: 300 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 6 gears, manual Top speed: 141 km/h Dimensions Length/Height: L3H3 Dimensions (L x W x H): 599 x 204 x 308 cm Weights Unladen weight: 2,017 kg Payload: 983 kg GVW: 3,000 kg Interior Interior: black Fjdpfx Aszky Hced Iepi Consumption Average fuel consumption: 7.8 l/100km Fuel consumption in urban areas: 8.7 l/100km Fuel consumption in rural areas: 7.3 l/100km Maintenance, History, and Condition Service booklets: Available APK (Technical Inspection): valid until 03.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Fpedpfx Aorp D I Isd Ioi Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Fpsdpfxerp D Nlo Ad Ioi Production Capacity Max : 70-100 m/min