Used Thermal Analyzers for sale (1,481)

Condition: used, mileage: 37,890 km, power: 110 kW (149.56 HP), first registration: 08/2023, fuel type: diesel, empty load weight: 2,530 kg, maximum load weight: 970 kg, overall weight: 3,500 kg, wheelbase: 3,000 mm, next inspection (TÜV): 08/2028, CO₂ emissions: 182 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.8 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: air conditioning, airbag, central locking, trailer coupling, Fixed trailer hitch, UConnect hands-free system (with Bluetooth interface), air conditioning, "Rear View" rearview camera, front seat heating, keyless access, DAB - digital radio reception, electrically adjustable and heated exterior mirrors, double passenger seat on the right, with storage compartment, "RSD 4000" radio (2-DIN) with 5.8" TFT color display, front speakers, Bluetooth interface, driver/passenger airbag, front and rear parking assist, hinges for rear swing doors with enlarged opening angle (max. 270°), hinges for rear doors with enlarged opening angle, new MOT/emission test, service booklet maintained, MB SPRINTER 215 CDI (315) with increased gross vehicle weight to 3,500 kg and a completely new REFRIGERATION SYSTEM from 2026! Suitable for fresh produce transport down to 0° Celsius, L2H2: medium length, high roof, medium wheelbase: 3,665 mm ... Robust insulated interior (HACCP), cargo securing: lashing rails on both sides ... Integrated refrigeration unit - without roof-mounted unit: M-TEC FRIGO DOMETIC 4500, suitable for fresh produce transport down to 0° Celsius ... Internal dimensions of the refrigerated cargo area: Length: 3,150 mm, Width: 1,700 mm, Width between wheel arches: 1,220 mm, Height: 1,510 mm, Height under integrated evaporator: 1,340 mm, Width of rear door opening: 1,380 mm, Width of sliding door opening: 1,220 mm, Volume: 8,421 cubic meters, Payload: 1,080 kg ... Capacity for approx. 85 E2 boxes. Additional options available at an extra cost (net): Standby cooling, 230-volt mains operation, separation/spreading/locking bars: 180 EUR, rubber mat for cargo area floor: 185 EUR, thermal curtains for sliding and rear doors. German vehicle registration, vehicle handover: approximately 10 days after written order. Information and contact directly: and Gkedszmkptepfx Akyoc

Condition: used, mileage: 38,489 km, power: 175 kW (237.93 HP), color: black, gearing type: automatic, total length: 78,500 mm, total width: 25,500 mm, total height: 36,500 mm, loading space length: 60,600 mm, loading space width: 24,800 mm, loading space height: 24,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, power assisted steering, - Air suspension, rear - Air suspension, front For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. Mercedes-Benz Atego 824 L platform/tarpaulin + tail lift Godpfx Asztlrcokyekc 6-cylinder engine! Tail lift: BÄR BC 1000 S4-A4 (1,000 kg), A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5S axle ratio i = 3.636, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B5B trailer brake, 2-line system, C2J wheelbase 4220 mm, C5I fastening parts, for platform, C6B steering ZF 8095, C6S stabilizer, for extreme high load, rear axle, C7E front underrun protection (ECE), steel, C7M protection device, lateral, weight-optimized, C8J splash guard, in the fender, C9L extended frame overhang, 200 mm, C9Y omission of rear underrun protection (ECE), D1B driver's air-suspended seat, standard, D1M co-driver's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, plain weave fabric, D4A standard cockpit, D4W window lift, electric, on both sides, D4Y sun visor, lateral, driver's side, D6F air conditioning, D6Y pollen filter, D7A additional thermal insulation, D7L storage compartment, above the windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0E batteries from Banner, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E2J fuse box, E3F additional socket 12 V/15 A, railing, E4B interface, fleet management system FMS, E5A switch no. 1 for external superstructure electrical system, E6A trailer socket 24 V, 15-pin, E6Y reversing warning, combined with hazard warning lights, E7F cable remote control for air suspension, E9H preparation for tail lift control, F1X S-cab ClassicSpace, 2.30 m, tunnel, F5L exterior sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7V cab entry, two-step, F8L immobilizer, with transponder, F8X rain/light sensor, G0U economy driving program, G1D gearbox G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0I tires tubeless, 235/75 R 17.5 front axle, I4A wheel formula 4x2, I6X air suspension, rear axle, J1A combination instrument, 10.4 cm, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J3N Fleetboard Eco Support, J5S radio, with USB connection and Bluetooth, J9D preparation for toll collection, J9N preparation for Truck Data Center 6 (DTCO), K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe pointing inwards, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M2A engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M8Z fuel preheating, P0L tail lift preparation, Atego, Q1D front spring 4.0 t, parabolic, Q7B trailer coupling Ringfeder, Q7R trailer coupling G 135, for ZAA, Q8Y cross member, later installation of AHK G135 ZAA, R0Z wheel nut cover, R1B steep shoulder rims 6.75 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5Z cruise control, T0J weight variant 7.49 t (3.8/5.0), X2T maintenance documentation, Z4E in-line engine, 6 cylinders, Z5C OM 936, cargo space

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,100 mm, loading space width: 1,832 mm, loading space height: 1,861 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Emission standard, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT * Start-stop system with brake energy regeneration * One towing eye in the front * Preparation for trailer hitch * Fuel tank 75 l * Differential lock on the rear axle (manually switchable, mechanical) * Approved as a 3.5t vehicle * Reinforced front axle * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, rolling resistance optimized * All-season tires * Battery 520 A (92 Ah) * Operating voltage 12 V * Immobilizer, electronic * Electrical terminal strip and KFG (wiring harness preparation) * Alternator 180 A * Air conditioning 'Climatronic' in the driver's cab Gsdpezfxd Asfx Akyekc * Daytime running lights with assistant headlights and coming and leaving home function * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Fog lights including cornering lights * Lateral marker lights * Headlight cleaning system, windshield washer fluid level indicator, heated windshield washer nozzles * Step lighting * Exterior mirrors, electrically adjustable, heated and foldable * Left exterior mirror, convex, with integrated LED turn signal and wide-angle view * Right exterior mirror, convex, with integrated LED turn signal and wide-angle view * Grab handles at the rear pillars * Rear wing doors with enlarged opening angle * Side windows in the front and rear and rear windows in thermal protection glass, darkened from the B-pillar (privacy glass) * Windshield wiper intermittent function with light and rain sensor * Sliding door, right * Side window in the passenger/cargo area, front left, fixed * Side window in the passenger/cargo area, front right, fixed * Laminated windshield in thermal protection glass, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Electronic parking brake * Premium interior noise reduction measures * Glove compartment with lockable flap, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12 V socket, cup holder * Three-point automatic seatbelts with height adjustment, 12 V socket in the driver's cab * Seatbelt warning system, electrical contact in the seatbelt buckle * 2 remote control keys * Keyless Go * Auxiliary water heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Suspension seat 'ergoActive' right * Seat covers in fabric 'Toronto Grid' * Heated driver and passenger seats, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging power * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business (12.9 inches) * Digital radio reception (DAB+) * MAN Media Van Navigation Business package (12.9 inches) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip control (ASR) and ABS * Parking sensors front and rear * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant 'Light Assist' * Driver alertness and fatigue detecti

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. Gjdpfszxc Dmsx Akyokc The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. The controls are excluded.

Condition: new, maximum load weight: 30,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,050 mm, Year of construction: 2026, Equipment: ABS, Schmitz SKI 24 SL 7.2 Thermo steel tipper body 24.6 m³ * Body length: 7,480 mm * Body width: 2,354 mm * Volume: 24.6 m³ * Tyres: 6 x 385/65R22.5 * Satin-finish ALCOA aluminium rims * Fifth wheel height: 1,250 mm * Wheelbase: 4,800 mm * Extra-lightweight chassis frame * Folding underrun protection * Hyva hydraulic cylinder * Schmitz axles with air suspension and disc brakes * Paver brake * Automatic lowering during tipping process * Air bag pressure gauge * LED lighting Gkodpfx Akew U Hv Tjyjc * 2 LED reversing lights * Full thermal insulation * Prepared for electronic measurement technology * Tailgate with additional tension locks * 5 mm steel floor * 4 mm steel side walls * Roof tarpaulin with quick-release fastener * Chassis hot-dip galvanized * Tarpaulin colour: WHITE RAL 9010 * Body colour: WHITE ALUMINIUM RAL 9006 * ... For further information, please feel free to contact us! Available from October also with electric sliding roof.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Gksdpfov S Hyvox Akyoc Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. Godsv Dftxjpfx Akyokc ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell GRAU-1, Living container | Office container | Construction container | Model GRAU-1 | 240 × 600 cm High-quality & flexible space solution Gkodpfx Aksxcgxcsyjc Our readily available containers can be inspected and collected directly from our warehouse. The office and living containers offer an ideal solution for a wide range of applications – with high quality, maximum flexibility, and short delivery times. Technical Details Dimensions: • Width: 240 cm • Length: 600 cm • Height: 250 cm Insulation • Ceiling/Walls: 50 mm PUR (Polyurethane) • Optional: 100 mm insulation (PUR, PIR, or rock wool) • Floor: 16 mm fiber cement board + PVC flooring Equipment & Quality • 1 room • 1 glass door • 3 fixed-pane windows • High-quality window and glazing systems from REHAU for optimal thermal insulation and durability Colors • Façade: RAL 7040 • Frame: RAL 7016 Customization Individual adjustments and custom-made solutions are possible at any time according to customer requirements. Storage & Delivery • In-stock items: Same-day shipping possible • Not in stock: Production time approximately 2–4 weeks, depending on the model • Worldwide shipping: Reliable and professional delivery to all countries Further Options • Custom dimensions on request • Expandable equipment depending on needs 📍 Showroom: Am Schafhaus 28, 53557 Bad Hönningen Germany For further information or a customized offer, we are always happy to assist you.

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Gkedoxcg Ecspfx Akyjc Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, mileage: 346,460 km, power: 200 kW (271.92 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 5,500 kg, maximum load weight: 10,500 kg, overall weight: 16,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. ClassicSpace cabin, Active Brake Assist, short cab, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 8-speed manual gearbox, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO, chassis side coverings, differential lock, work lights, leaf/air suspension, trailer coupling with ball head, underride guard, roof hatch, green environmental sticker. Gsdpfsxc Nzyox Akyskc Wheelbase: 4760 mm, 6.1 t front axle, rear axle with 390 Hypoid bevel gear, 11 t, electronic braking system with ABS and ASR, disc brakes on front and rear axle, condensation monitoring for compressed air system, rear axle stabiliser, steel front underride protection, leather steering wheel, classic cockpit, pollen filter, additional thermal insulation, communication interface (KOM), ClassicSpace, LED daytime running lights, headlamp cleaning system, engine brake, ESP (Electronic Stability Program), lane keeping assist, Active Brake Assist, rear engine PTO with hydraulic pump ISO 7653D. Chassis length approx. 5450 mm! Chassis height approx. 940 mm! ACCESSORY SPECIFICATIONS SUBJECT TO CHANGE. Errors, changes, and prior sale excepted.

Condition: used, mileage: 85,805 km, power: 353 kW (479.95 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 17,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,250 mm, fuel: diesel, brakes: engine braking, color: green, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2019, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, * Very rare, heavy-duty concrete mixer tractor unit with concrete hydraulics * Multiple concrete mixer trailer units in stock, ranging from €9,900 to €14,900 * Only 85,805 km original mileage * Cab: L ClassicSpace with one bed and two seats * Condition: see photos * Air conditioning * Cool box / refrigerator * Bi-Xenon headlights * Axle load measuring system * Liftable trailing axle * Mechanically adjustable heavy-duty Jost fifth wheel coupling * 12-speed gearbox - Type: G 330-12 / Mercedes-Benz PowerShift transmission * Driver assistance system: Adaptive cruise control * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Brake Assist (Active Brake Assist) * Driver assistance system: Lane Keeping Assist * Driver assistance system: Electronic Stability Program * Blind spot monitoring * Alloy wheels * Cruise control * Audio system: CD radio (Bluetooth) * Mounting plate / 40 mm fifth wheel plate * Light and rain sensor * Power windows * Fog lights with LED daytime running lights * Central locking with remote control * Comfort lock system * Driver airbag * Rear axle differential lock * Preparation / switch for lift axle on trailer/semi-trailer * Seats in cab: Driver’s air-sprung comfort seat * Seats in cab: multifunction passenger seat * Manual steel roof hatch * Suspension: leaf/air suspension * Engine: 12.8 L – 350 kW inline 6-cylinder diesel (OM 471) * Compressed air connection in cab * Drawers under dashboard * 24V power socket in cab * Thermal insulation * Work lights * Exhaust outlet down to the right Gkodpfexdcwqox Akyjc * Exterior mirrors electrically adjustable and heated * Electronic brake system (EPB) with ABS + ASR * Air horn * Tinted windscreen * Variable steering assist pump * Enhanced engine brake * Disc brakes on front and rear axles * Headlight cleaning system * Additional water heating * External compartment left * Regulated water pump * CB radio If a new TÜV (MOT) inspection is required, we will gladly provide a quotation from our partner workshops. Our offer generally excludes new TÜV certification, DGUV inspection, safety test (SP), and UVV testing. More trucks available on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is responsible for independently verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Gjdpfx Akswkilwsyokc Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Gkedjxzg Ubopfx Akysc Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Gkedpjx R A A Nsfx Akysc Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Condition: used, This listing is for the Applied Biosystems ProFlex PCR Sytem Gedpfxsx Syrqe Akyjkc The unit is in full working condition and is ready for immediate release. The Applied Biosystems ProFlex PCR System is a thermal cycler/performance PCR instrument designed for amplifying DNA through PCR — a core technique in molecular biology for cloning, sequencing, gene expression studies, genotyping, and other applications. It’s used in research, teaching, and clinical lab settings (research use only; not for diagnostic procedures)

Condition: like new (used), Juice Mixing and Preparation Line with Homogenizer – Stainless Steel Industrial line for mixing, preparation, and homogenization of juices, designed for the production and conditioning of juices, nectars, fruit beverages, and other liquid or semi-liquid products. The installation consists of several stainless-steel process tanks, mixing systems, sanitary piping, pumps, instrumentation, and a homogenizer, allowing for various product preparation operations to be carried out within a single unit. Homogenization reduces and more uniformly distributes the particles present in the product, helping to improve its stability, texture, and consistency, and reducing the tendency for phase separation, depending on the formulation. MAIN FEATURES -Type: Juice mixing and preparation line -Application: Juices, nectars, and beverages -Several stainless-steel process tanks -Tanks with mixing systems -Integrated homogenizer -Product mixing and homogenization -Circulation and transfer system -Sanitary pumps -Process piping and valves -Pressure and temperature instrumentation -Batch preparation and formulation -Possibility of product recirculation -Construction primarily in stainless steel -Hygienic design for the food industry Gsdpfxex S E E Ae Akyokc -Unit mounted on a common frame -Integrable with thermal treatment and filling systems PROCESS The different ingredients or base products are introduced into the preparation tanks, where mixing, dissolution, ingredient incorporation, and conditioning operations can be carried out. Subsequently, the product can circulate through the homogenizer, where it is subjected to a mechanical treatment designed to reduce and uniformize the size of the particles or dispersed phases. Depending on the formulation and installed configuration, the system can be used for: -Preparation and mixing of juices -Production of nectars -Mixing of different concentrates or pulps -Ingredient incorporation -Homogenization -Suspension stabilization -Reduction of phase separation -Pre-treatment before thermal processing -Feeding filling lines APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, liquid purees, and other food beverages that require a versatile installation for preparation and homogenization. It can be used with products containing pulp or suspended particles, subject to the characteristics of the product and the configuration of the homogenizer and other installed equipment. The line can subsequently be integrated with pasteurizers, sterilizers, heat exchangers, aseptic tanks, and filling systems. Machine available for inspection. Additional technical information, capacities, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast Gkedpfoygx Hnjx Akyec - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. Godpfxjzrg T Eo Akyekc *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station Gkedozqtkzjpfx Akysc * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: used, mileage: 162,192 km, power: 335 kW (455.47 HP), first registration: 02/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,440 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, 2846 Actros Roll-off Body + PK 28002 Tec E Crane + Grapple Wheelbase: 4.80 m Suspension: Leaf-air suspension Palfinger Crane Type: 28.002 TEC E Operating hours: 2438 h 6x Hydraulic extension 2x Hydraulic outriggers 5+6 control + Remote control + Grapple Palfinger Roll-off Hook Year of manufacture: 2022 Special equipment: Gedpfjzn Dbrjx Akyekc Axle load measuring device, front axle load 9.0 t, equipment package: Driving, right exterior mirror with maneuvering position, electric sun visor for windshield, sun visors for side windows, driver and passenger door, sun visor for driver's side window, equipment package: Media, equipment package: Visibility, Bi-Xenon headlights, LED taillights, headlight cleaning system, 220 Ah battery (AGM), standard and DuoMatic brake connections, interactive cockpit multimedia system, navigation system, remote query function Remote Online, additional compressed air tank, air horn, cab: with air suspension, suspension: front springs 9.0 t, 3 leaves, additional parking brake on front axle, fire extinguisher, vehicle without MirrorCam exterior mirror camera, 12-speed transmission - type: G 281-12, notebook holder, rear axle planetary gear 485, folding table in bulkhead, automatic climate control, comfort telephony (Bluetooth) with inductive charging cradle, additional fuel pre-filter, fuel tank: 390 L aluminum, left, cooler box / refrigerator, cooling capacity for hot climates, steering oil cooler, air intake behind cab, air filter: cyclone air filter, 2-cylinder air compressor, rear engine PTO, ISO pump, reinforced engine brake, reinforced engine mounting, reinforced engine compartment encapsulation, trailing axle 8 t steered, relief-valved, liftable, auxiliary drive MB 123-10c, programmable special module, PremiumComfort mattress lower, wheelbase variant 4900 mm, frame lowering with bellows residual pressure control, frame overhang 2550 mm, reversing warning sound and flashing warning light (external warning signal), switch for loading platform, disc brakes with partial protection, interface for fleet management system, fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat leather, seats in cab: armrests on both sides of passenger seat, seats in cab: driver seat with massage function, seats in cab: driver seat comfort suspended seat, external sun visor, stowage flap on the outside left, 12V / 15 A socket in the passenger footwell additionally, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, door extension for cab, additional thermal insulation, two-plate clutch, oil cooler transmission Additional equipment: Emission standard EURO 6, storage compartment above windshield with lid, axle configuration: 6x2, Actros 5, Actros cab L, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, exhaust tailpipe to the center of the vehicle, equipment package: Powertrain 2, batteries arranged side by side, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entry fixed, cab: interior package chrome, cab: tilting mechanism hydraulic, cab: L ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab variant: L, stowage flap on the outside right, bumper corners a

Condition: excellent (used), Year of construction: 2019, 3 x Miyano ABX-51SYY2 Years: 2016, 2018, 2019, 2021 Gksdpjzq Aqdjfx Akyoc Alps ASR RX45/51EV automatic bar feeder Fanuc 31i-B CNC Control Swarf coveyor Twin Spindles Twin Independent 12 Station Turrets Full Y-Axis on both Turrets Driven Tooling T Thermal Compensation Tooling package Operating manuals Service history (where available) Barloader Alps Tool ASR RX 51Ev Machines available in October 2026

Condition: used, mileage: 183,000 km, power: 105 kW (142.76 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2028, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Sprinter 314 CDI-Tourer, 8-seater German vehicle from Mercedes-Benz Leasing. One previous owner. Trailer hitch, 2800 kg towing capacity. Special equipment: 13-pin trailer socket, Audio system: MB audio system with radio, USB, and Bluetooth hands-free system, Bluetooth hands-free system, DAB tuner (digital radio reception), Driver's tachograph operation located on the front under the headliner, Digital tachograph, Suspension: Level I stabilization, Front cup holders, Folding cover for storage compartment, Roof rack with integrated step, Smoker's package, Spare wheel in full size, Spare wheel carrier under the end of the chassis frame including jack, Seat equipment: Comfort headrest, Passenger seat, Seats in the cab: Double passenger seat, Seats in the cab: Comfort driver's seat, Seats in the cab: Driver's seat base, low, Seats in the cargo/passenger compartment: 1st row, 2-seater bench, Seats in the cargo/passenger compartment: 2nd row, 3-seater bench, narrow, Reinforced front axle, Jack, Thermal insulation for cargo/passenger compartment. Additional equipment: 3rd brake light, Storage compartment above the windshield, Storage compartment below the dashboard on the passenger side, Storage: Luggage net on the rear doors, Storage net on the front seat backrest, left, Towing eye at the rear, Adaptive brake light, Airbag on the passenger side, Airbag on the driver side, Anti-slip control (ASR), Display for windshield washer fluid level, Exterior mirrors, electrically adjustable and heated, both sides, Exterior temperature display, Body floor in combined design, Headliner, Headliner in the cab, Automatic activation of headlights, Electronic brake force distribution (EBV), Windows for rear doors, Window in the cargo/passenger compartment: - fixed, rear left, Window in the cargo/passenger compartment: - fixed, rear right, Window in the cargo/passenger compartment: - fixed, front left, Window in the cargo/passenger compartment: - fixed, front right, Generator 200 A, Heated rear window, Rear door (opening angle 180 degrees), Body/superstructure: Standard combined design, Child safety lock, Comfort suspension, Communication module (LTE) for digital services, Fuel tank: Main tank 71 liters, Plastic floor in the cargo/passenger compartment, Steering wheel (adjustable steering column), Headlight range adjustment, Mercedes-Benz emergency call system, Engine 2.1 L - 105 kW CDI CAT, Passenger car registration, Wheelbase 3250 mm, Interior rear view mirror, Low emissions according to exhaust standard Euro 6, Sliding door cargo/passenger compartment, right, Safety belt system with warning system (passenger side), Safety belt system with warning system (driver side), Seat equipment: Comfort headrest, Driver's seat, Seat cover / upholstery: Fabric, Start/Stop system, Socket (12V connection) in the cargo/passenger compartment, All-round glazing, Paneling in the cargo/passenger compartment: Wheel arch lining (plastic), Paneling in the cargo/passenger compartment: Standard half-height, Fleece battery 92 Ah, Warm air duct to the cargo/passenger compartment, Service interval indicator Assyst, Heat-protecting glazing (windshield with band filter at the top), Permissible total weight 3.50 t, Auxiliary heater (air) electric. * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. * Errors in input are not excluded. * Please check the equipment on the vehicle. Subject to e Gkjdpfx Akez Axt Ejyoc

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. Gksdpfxoz Ai Dnj Akyoc The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m²

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Maximum temperature 450 °C Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Net weight 200 kg Stackable up to 3 chambers General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Gedpfx Aszx Dztskyekc Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Gkodpfx Akoz Dft Esyec Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%