Used Thermal Analyzers for sale (1,491)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Smooth exterior walls, badge_isoboden, badge_rohrbahn Equipment: -+2° C to +10° C -60mm Iso wall -GOVI 1600N Net price: €14,663.87 / Gross price: €17,450.00 Article number: ERK230301622.12 Technical data: • Brand: Other • Model: ER 3.0 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 165 x 220 cm • Exterior dimensions (L x W x H): 447 x 223 x 244 cm • Loading height of the floor: 59 cm • Permissible total weight: 3,000 kg • Unladen weight: 800 kg • Payload: 2,200 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Torsion-resistant chassis for safe driving characteristics • Continuous, maintenance-free commercial axles with reinforced axle supports, hot-dip galvanized • Individual wheel suspension with large suspension travel, high inherent damping and soft suspension • This ensures maximum driving comfort and optimal driving safety, even under extreme loads • Special Iso sandwich floor, 100 mm thick - insulated with a non-slip, sanded surface • 4 stable telescopic crank supports • Roof and side walls 60 mm thick - insulated with joint-free plastic sandwich panels with rigid foam insulation • The Iso body has an ATP certificate with a lambda coefficient = 0.33 W/mK • Exterior color: white • Floor, roof and corner edging made of aluminum (anodized), mounted without thermal bridges • 2-wing Iso doors with stable hinges and rotating bar locking mechanism made of V2A stainless steel (lockable) • Rubber seals on the rear doors with 5 sealing blades • The rear door can be opened from the inside in an emergency • Stainless steel rear frame system • Doors can be swung open 270° with door latch • 2x pipe duct mounted inside on the roof • Aluminum lower ram protection, 3-sided • Stand-alone cooling system GOVI Arctic 1600 N • Cooling capacity in watts at a cooling room temperature of +2° C and an ambient temperature of 40° C • Temperature control range from +0° C to +10° C • Air volume flow evaporator: 750 m³/h • Completely encapsulated unit with "outdoor" housing mounted on the front end at the top Godpfx Ajz Ri D Aefrsuh • Electronic defrosting system for the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse automatic • Plastic fenders • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Outline lights with rubber arm at the rear, top • Reinforced automatic support wheel for safe parking of the loaded trailer

Condition: used, mileage: 25,600 km, power: 125 kW (169.95 HP), color: white, gearing type: mechanical, emission class: euro6, number of seats: 8, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Gujdpoyrlzvjfx Afreh Wheelchair/disabled lift at rear A50 front axle with increased payload, AR2 axle ratio i = 3.923, BA3 Active Brake Assist, C6L multifunction steering wheel, CB1 suspension for comfort and load protection, CB7 Stabilization Level I, CL1 steering wheel adjustable in tilt and height, CT1 vibration damper, D03 high roof, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E2I additional battery for retrofit consumers, interior, E36 isolation relay for additional battery, E3J pre-installation switch panel, E3M MBUX multimedia system with 7-inch touchscreen, ED4 AGM battery 12V 92Ah, ED5 parameterizable special module, EK1 terminal strip for electrical connection, ES0 jump-start contact, ES2 12V socket in boot/load compartment, F61 interior rear-view mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF5 shelf above windscreen, FJ1 folding cover for storage compartment, FJ4 storage compartment under cockpit, FJ5 folding cover for storage compartments left and right, FY7 multi-function remote control, GD8 6-speed ECO Gear 360 manual transmission, H00 warm air duct to passenger compartment, H01 thermal insulation for cargo/passenger compartment, H15 seat heating for passenger, H16 seat heating for driver, H1I long-range air vents in instrument panel, H21 heat-insulating glass with filter strip on windscreen, H22 heated rear window, HH2 electric auxiliary air heater, HH7 basic roof-mounted air conditioning, HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC, IL5 left-hand drive, IR4 wheelbase 3665 mm, IT4 3.5-ton, J10 speedometer km/h, J55 seat belt warning device for passenger seat, J58 seat belt warning device for driver's seat, J65 external temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB7 park package with rear-view camera, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 initial service interval 60,000 km, JW0 reversing warning device, K51 misfuelling prevention, K60 exhaust straight to the rear, KB7 main tank 93 litres, L13 fog lights with cornering light, L21 reverse light bottom, L94 omission of parking light, LA1 high beam assist, LA2 headlight assistant, LB1 side marker lights, LB3 flat indicator lights, additionally at rear on roof, LB5 3rd brake light, LB9 exit lights, LE1 adaptive brake light, MJ8 ECO start/stop function, MP6 engine version Euro VI, MR0 emission stage E (for heavy-duty vehicles), MS1 cruise control, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm, P48 rear mud flaps, Q11 longitudinal member reinforcement, Q67 rear towing eye, RY2 wireless tyre pressure monitoring VA and HA, S04 adjustable passenger seat, S22 armrest for driver's seat, S25 armrest for passenger's seat, S28 armrest, driver and passenger door, SA5 driver airbag, SA6 passenger airbag, SB1 comfort driver's seat, SE5 lumbar support driver's seat, SK0 comfort headrest driver, SK1 comfort headrest passenger, SK2 seat occupancy detection driver's seat, SZ7 storage net driver's seat backrest, SZ8 storage net passenger seat backrest, T16 sliding door right, T55 electric operation for right sliding door, T74 entry grab handle, U26 pre-installation seat configuration 2/2/3, V35 wheel arch trims, V36 roof lining, V39 plastic floor People Mover, V3L all-weather floor mats, V40 combi floor

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ Gujdsxv Ayvopfx Afroh This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: used, Year of construction: 2003, Technical details: x-travel: 3600 mm y-travel: 900 mm z-travel: 820 mm b-axis: -100 - +100 ° control: Siemens 840 D tool changer with: 30 Plätze rapid traverse:: 100 m/min rapid traverse:: 60 m/min. table-size: 4200 x 900 mm table load capacity: 4200 kg total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 4,6 x 8,7 x 3,3 m The DECKEL MAHO DMF 360 Linear is a highly dynamic 5-axis travelling-column machining center designed for the complete machining of large and heavy workpieces. Thanks to the linear drive in the X-axis, the machine achieves very high rapid traverse speeds and reduced non-productive times, making it particularly suitable for toolmaking, mold making, and general mechanical engineering. Travelling-column design for high stability when machining long workpieces Linear drive in the X-axis with rapid traverse speeds up to 100 m/min 5-axis machining with NC swivelling milling head (B-axis) Large travels for machining components longer than 4 meters High precision through direct measuring systems and thermally symmetrical machine design Guodpfozi Nc Rsx Afreh *

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: white, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell Sun-1, Office container | Living container | Construction container | Model SUN-1 240cm x 600cm | High-quality and flexible solution Available products can be inspected and collected directly from our warehouse. Our office and living containers offer an excellent solution for a variety of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical details: Dimensions: • Width: 240 cm • Length: 600 cm • Height: 250 cm Insulation: • Ceiling/wall: 60mm PUR (polyurethane) • Optional: 100mm insulation with PUR, PIR, or rock wool available • Floor: 16 mm fiber cement board + PVC covering High-quality workmanship for long-term use Equipment: Godpfx Afjzvp Tporjuh • 1 room • 1 exterior door • 2 windows • High-quality window and glazing systems from REHAU for optimal thermal insulation and durability Colors: • Façade color: RAL 9002 • Frame color: RAL 9002 • Customization: Individual design possible according to customer requirements Stock and delivery: • In-stock items: Same-day shipping • Not in stock: Production time depending on the model, 2 to 4 weeks • Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. Custom dimensions: Products can be manufactured according to the specific requirements of the customer. Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany For further information or customized solutions, please do not hesitate to contact us!

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Guodpfx Afszp E T Sjreh Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, This listing is for Genlab OV/100/SS/F/DIG Oven Gujdpfxozc H Tbe Afrjh The unit is in full working condition and ready for immediate use This high-quality laboratory oven features a stainless steel interior, fan circulation for temperature uniformity, and an intuitive digital controller for precise thermal processing. [[1](), [2](?srsltid=AfmBOoqrBx2xG5acm9HXLERUkvFsY4t5ruoXCtKGooEYCW5co-g 0--YA), [3]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, The unit is in full working condition and is ready for immediate release A Julabo ED bath is a laboratory circulating water bath system that combines a bath tank with an immersion circulator for controlled heating and circulation of liquids. These units are commonly used to maintain samples or materials at a stable, set temperature in a lab environment. Typical Applications These baths are widely used in labs for tasks such as: Temperature control of samples during incubation, testing, or reactions Material testing (e.g., plastics, metals) Calibration of thermometers or thermal devices Heat treatment in research and quality control contexts What do E nd D stand for? E suggests an open bath with circulator mounted on a bridge — the immersion circulator sits on top of the bath tank and drives both heating and fluid movement. D designates the controller simplicity level (digital setpoint via keypad with PID temperature control) Gjdpfsy Iwz Iex Afrjuh

Condition: used, This listing is for the Sartorius Cubis MSE20201S Balance + YDP30 Printer The unit is in full working condition and is ready for immediate use Guedpey Iw Dijfx Afreh A high-capacity laboratory balance designed for accurate weighing of larger samples, typically used in labs, industrial settings, production environments or quality control applications. Typical Use Weighing large containers, batches of raw materials, or intermediate products Integrating into lab information systems Feeding weight data to printers, LIMS, or control software The Sartorius YDP30 is a compact laboratory thermal printer designed primarily to work with Sartorius balances and other lab instruments. It’s built for accurate, compliant printouts of measurement data, labels, and reports in regulated environments like quality-control, research, and industrial labs

Condition: used, This listing is for a Qiagen PyroMark Q24 Advanced Sequencer For advanced methylation and mutation quantification in long sequence runs using Pyrosequencing Advanced technology, software, and chemistry for long sequence runs Quantitative methylation analysis at consecutive CpG or CpN sites Improved quantification of sequence variations at any sequence position Easy and improved base calling functionality Assay versatility on the same instrument and in the same run PyroMark Q24 Advanced has improved Pyrosequencing technology to provide even better real-time sequence-based detection and quantification than before. PyroMark Q24 Advanced features advanced technology, software, and chemistry, and is highly suited for analyzing any kind of sequence variation, particularly DNA methylation at CpG or CpN sites, complex mutations, or for de novo sequencing applications such as microbial typing. Can be refurbished on request, refurbishment not included in price. Gjdpfx Afsxzh Sujrsuh

Year of construction: 2020, condition: used, This listing is for the Steris Reliance 500XLS Laboratory Glassware Washer The unit is in full working condition and is ready for immediate release Gjdpfsygiitsx Afrouh The Steris Reliance 500XLS Laboratory Glassware Washer is a high-capacity, automated washing and thermal disinfection system designed for demanding laboratory environments. It provides validated, repeatable cleaning performance for laboratory glassware, utensils, and instruments. Featuring programmable wash cycles, precise temperature control, and robust stainless-steel construction, the 500XLS ensures consistent results while meeting strict laboratory hygiene and compliance requirements. Its large chamber and efficient workflow make it ideal for research, pharmaceutical, healthcare, and industrial laboratories seeking reliable, high-throughput glassware processing

Condition: used, mileage: 257,752 km, power: 213 kW (289.60 HP), first registration: 12/2019, fuel type: diesel, empty load weight: 6,595 kg, maximum load weight: 8,905 kg, overall weight: 15,500 kg, axle configuration: 4x2, wheelbase: 3,825 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, total length: 6,240 mm, loading space length: 4,500 mm, loading space width: 2,350 mm, loading space height: 700 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, navigation system, onboard computer, soot filter, traction control, trailer coupling, MAN TGM 15.290 BL 4x2 available in approximately 6 weeks, chassis available on site from April 2026. - New TÜV (technical inspection) before delivery - Cab currently red; repainting in a desired RAL color is possible at a favorable package price for the TGM. - Automatic transmission - Multifunction steering wheel - Seat heating - Automatic climate control - Engine brake with cruise control - Auxiliary drive - Differential lock - LED work lights - Fog lights Gusdpfx Afsyv Rxpersh - Rear view camera - Trailer coupling, pintle hitch with pneumatic connections - Optional matching roll-off container, 4.5m length, available for immediate delivery. - Rotating beacons optional - Optionally also with extendable underrun protection for longer containers Roll-off tipper body for containers up to 4.2m-4.8m according to DIN 30722-1, NEW - Lifting/tipping capacity 12,000 kg - Permissible total weight: 15,500 kg, unladen weight: 6,495 kg, payload: 9,005 kg - Hook height 1,570 mm - Mechanical hook locking system - Pusher arm - Hydraulic container locking - Cable remote control (mounted on the A-pillar), additional operation on the unit - Emergency stop function - CE certificate and kit box - Paint finish of roll-off tipper body: black RAL 9005 - Dust box and stainless steel pan - Subject to errors and prior sale! - More information, additional XXL - images, directions, can be found on our website at: - For inquiries in English, please call ?si=jMv0dUJ2Qk4hiPd8 ?si=_pbdVZ2ZeMvRPTaW ... Climate control, automatic climate control, automatic transmission, navigation system, front seat heating, VAT can be shown separately, wind deflectors, ESP, ASR, ABS, service booklet, sunroof, radio, telephone with hands-free function, on-board computer, cruise control, heated mirrors, electric front windows, electric door locks, central locking with remote control, electric suspension control, trailer coupling, fog lights, power steering, tachometer, differential lock, interior air filter, outside temperature indicator, tinted windows, electrically adjustable mirrors, tachograph, suspension: leaf springs - air suspension, cab: short, air-suspended cab, air-suspended driver's seat, electric windows, seat heating, work lights, additional lights, thermal protection glazing, auxiliary drive, tipping hydraulics, emission class: Euro 6, diesel, rear-wheel drive, HSN 1516, electronically controlled braking system (EBS), particulate filter, TÜV + emissions test will be renewed before sale, can be rented, particulate matter sticker: 4 - green, hands-free device.

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device Godpfx Afju Nxa Herouh - stacking device - electronic control system (Mitsubishi) *

Condition: used, This listing is for the AATI Fragment Analyser capillary electrophoresis system The unit is in full working condition and is ready for immediate use The AATI Fragment Analyzer is an advanced automated capillary electrophoresis system designed for precise analysis of DNA and RNA fragments. Developed by Advanced Analytical Technologies Inc. (AATI), the instrument provides high-resolution sizing, quantification, and quality assessment of nucleic acid samples. Widely used in genomics, molecular biology, and next-generation sequencing workflows, the system streamlines fragment analysis by replacing traditional gel electrophoresis with a faster, automated process. It allows laboratories to process multiple samples simultaneously, delivering reproducible results with minimal manual intervention. The instrument supports a variety of assay kits for DNA and RNA analysis, enabling applications such as NGS library quality control, PCR fragment verification, and RNA integrity assessment. With integrated software for data analysis and reporting, users can easily visualize fragment distribution, concentration, and size profiles. Key Features: Automated capillary electrophoresis for DNA and RNA analysis High-resolution fragment sizing and quantification High-throughput sample processing Gujdpfx Aeyr Nl Ssfroh Ideal for NGS library QC, PCR product analysis, and RNA quality checks User-friendly software with clear electropherogram and gel-style outputs The AATI Fragment Analyzer is a reliable solution for laboratories requiring accurate nucleic acid fragment analysis with improved efficiency and reproducibility

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, machine/vehicle number: Bürocontainer Modell Terrace, Living container | Office container | Construction container | Model TERRACE | 240 × 600 cm | High-quality & flexible solution Our immediately available containers can be inspected and picked up directly from our warehouse. Our office and living containers offer an excellent solution for a wide range of applications and impress with outstanding quality, high flexibility, and short delivery times. Technical details Dimensions: • Width: 240 cm • Length: 600 cm • Height: 260 cm Insulation • Ceiling/Wall: 60 mm PUR (Polyurethane) • Optional: 100 mm insulation (PUR, PIR, or mineral wool) available • Floor: 16 mm fiber cement board + PVC covering High-quality workmanship for long-term use Equipment & Quality Guedpfxsvxhkvj Afrjh • 1 room • 1 glass door • 2 floor-to-ceiling windows • 1 terrace • High-quality window and glazing systems from REHAU for optimal thermal insulation and durability Colors • Façade color: RAL 7040 • Frame color: RAL 7016 • Individual customizations possible according to customer requirements Storage & Delivery • Stock item: Same-day shipping possible • Not in stock: Production time depending on the model, approx. 2–4 weeks • Worldwide shipping: Reliable and professional delivery to all countries • Custom dimensions: Production according to customer-specific requirements possible 📍 Showroom address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to provide further information or customized solutions!

Condition: used, This listing is for a Millipore Opticab XL 4 Capsule. The unit is in full working condition and is ready for immediate release. The Opticab XL 4 Capsule from Merck Millipore is indeed a game-changer in the filtration space. Its patented design offers robust protection against thermal and hydraulic stresses, making it reliable for various liquid applications. The disposable nature of these capsules not only saves you from the hassle of assembly and cleaning but also significantly cuts down on verification time, which can be crucial in fast-paced environments like pharmaceutical manufacturing. Gjdpfxexxyiaj Afrsuh

Condition: used, This listing is for a Zebra TLP 3842 Printer. The unit is in full working condition and is ready for immediate release. The Zebra TLP 3842 is a thermal transfer barcode printer designed for high-quality printing of labels, tags, and barcodes. Its advanced technology ensures clear, precise output, making it ideal for various labelling needs. Key Specifications: Print Resolution: 300 dpi resolution allows for high-quality graphics and small text, ensuring legibility and detail. Print Width: Supports a maximum print width of 4 inches, accommodating a range of label sizes. Gedpfx Afjxxyl Iersuh Connectivity: Equipped with multiple interfaces: Parallel, Serial, and USB, providing flexible connectivity options for different setups. Memory: 512 KB RAM and 1 MB Flash memory support efficient processing and storage of label formats and graphics. Power Supply: Comes with a U.S. power supply; a dispenser option is also available for added functionality. Real-Time Clock: Note that the printer does not include a real-time clock, which may be relevant for time-stamping labels. Applications: Prescription Bottle Labelling: Ideal for pharmacies requiring accurate and clearly printed labels for medications, ensuring compliance and safety. Laboratory Specimen Labelling: Perfect for labs needing to label samples and specimens clearly, minimizing the risk of mis-identification. Electrical Component and Mechanical Part Labelling: Useful in manufacturing settings for labelling parts and components, aiding in inventory management and traceability.

Condition: used, PROMEOS Gas-Fired Chamber Furnace For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750°C and a stated rated thermal output of 40–80 kW. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace dates from 2016. The last known maintenance was performed in 2021. Equipment and Features Gjdpjz Ipcxofx Afrsuh Gas-fired industrial furnace system Maximum furnace temperature of 750°C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical Data Manufacturer: PROMEOS System designation: BA 31010.0484.0000 Year of manufacture: 2016 Maximum furnace temperature: 750°C Burner heads: 2 × ECO 03-40 Rated thermal output: 4 × 10–20 kW Fuel: Natural gas type H, E and L / Propane Gas connection pressure: 50 mbar Propane consumption: approx. 3.9 m³/h Combustion air requirement: approx. 120 m³/h Exhaust gas mass flow: approx. 165 kg/h Air ratio: 1.35 ± 0.05 NOx emissions at rated load: approx. 20 ppm CO emissions at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Sound pressure level: ≤ 70 dB(A) Dimensions of the PROMEOS chamber furnace - Width: 2,800 mm - Depth: 2,700 mm - Height including lift-up door: 3,400 mm “Everything from a single source: We will be happy to offer you a suitable bank financing option for your project.” More items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2025, color: white, overall weight: 1,100 kg, empty load weight: 1,100 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Modell ANTHRAZIT | 240 × 600 cm, Sun Container GmbH | Office Container | Living Container | Construction Container | Model ANTHRACITE | 240 × 600 cm | High-Quality & Flexible Solution Our immediately available containers can be viewed and collected directly from our warehouse. Our office and living containers provide an excellent solution for a wide range of applications and impress with outstanding quality, high flexibility, and short delivery times. Technical Details Dimensions: Length: 240 cm Width: 600 cm Height: 250 cm Weight: 1,350 kg Insulation & Construction Ceiling/Walls: 5 cm PUR (polyurethane) Particularly robust and specially designed floor frame 2 mm thick galvanized steel sheet Glazing with rock wool insulation between the panes Optional: 10 cm insulation available (PUR, PIR, or rock wool) Floor: 16 mm fiber cement board + PVC flooring Gedpfx Ajz Ip Diofreuh Equipment & Quality 1x Room 2x Floor-to-ceiling windows 1x Standard window 1x Fire-rated door High-quality windows and glazing systems from REHAU for optimal thermal insulation and long-lasting durability Colors RAL 7016 High-quality workmanship for long-term use Warehouse & Delivery In stock: Same-day shipping possible Not in stock: Production time approximately 2–4 weeks, depending on the model Worldwide shipping: Reliable and professional delivery to all countries Custom dimensions: Manufacturing according to customer-specific requirements possible 📍 Showroom Address: Am Schafhaus 28, 53557 Bad Hönningen, Germany For further information or customized solutions, please feel free to contact us!

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 Gujdjz Ix Auopfx Afroh – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: like new (used), Year of construction: 2025, operating hours: 1,500 h, functionality: fully functional, pressure: 12 bar, total height: 2,896 mm, total length: 12,192 mm, total width: 2,438 mm, empty load weight: 14,000 kg, Mobile containerized steam boiler plant 2,000 kg/h Gusdpfx Aoz Ix Svsfreh • Configuration: Mobile containerized steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: Steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2″, including gas filter, pressure regulator, operating and safety valves, and valve tightness monitoring. • Controls and automation: Valiantec, equipment for 72-hour operation without continuous operator attendance, modulating water-level control, Gestra TDS/BAE automatic TDS blowdown, and Crotti pneumatic bottom blowdown. • Feedwater pumps: 2 × Grundfos CR3-27. • Feedwater tank / atmospheric deaerator: DGSA 1500 FS, capacity 1,500 liters, AISI304 stainless steel, with steam heating and temperature control; specified water temperature 85–95°C. • Water treatment: A water softening system is not included in the scope of supply but can be supplied and installed at the buyer’s request, subject to separate agreement. • Blowdown cooling system: 250-liter AISI304 blowdown vessel with automatic cooling control. • Pipework and fittings: thermally insulated pipework, isolation and non-return valves, and steam traps. • Flue: insulated DN450 stainless-steel flue system. • Safety equipment: water-level and pressure safety devices, two safety valves, LPG and smoke detection, alarms, emergency shutdown, automatic gas shut-off, and ventilation. • Container footprint: 12,192 × 2,438 mm – length × width. • Connections: DN80 steam outlet, DN65 gas inlet, 1″ water inlet, DN80 blowdown vessel drain.

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description The Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Overload and short circuit protection 4mm safety binding posts for secure connections Gsdpfoxhfqhox Afrsuh Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs

Condition: used, Year of construction: 2007, Overview This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data Gjdpfx Afoz Hbp Ierouh - Manufacturer: Logopak - Model: LOGOMATIC 920 II PF - Year of manufacture: 2007 - Machine type: print-and-apply pallet labeller - Output: 4 labels/min - Print methods: direct thermal and thermal transfer - Label size: 148 x 210 mm (W x H), 3 mm gap - Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) - Mounting: vertical, print head at the bottom - Control: Logopak POWER LEAP II - Interfaces: W&T COM server, RS 232 - Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V - Compressed air: required (valve block and vacuum generator) - Overall dimensions (L x W x H): 1,530 x 1,000 x 2,910 mm Equipment - Labelling unit in a closed cabinet with two windowed doors - Label unwinder, printer and telescopic tamp applicator - Control box on the machine frame with display terminal, start/stop, emergency stop, auto/bypass key switch and main switch - Bypass function and three-colour signal tower - Floor frame with foot plates for anchoring beside the pallet conveyor - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Year of construction: 2006, condition: used, Manufacturer: Terlet Model: stirring kettle Year: 2006 Condition: Used Guodpfx Aoz E R Hgefreh Serial number: 0511170-001-001/002 Stock number: 3423 Capacity: 2 x 1000 liters Heating: thermal oil Infeed height: 1950 mm Outfeed height: 1050 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 8.6kW (2x) Dimensions: 2900 x 5700 x 2600 mm Weight: 2 x 1500 kg 2x tilting stirring kettles with scraper agitator. Includes Endress + Hauser Promag P flowmeter. Includes Carnitech L25-1-4209 mobile lift for standard containers, year 2006.

Condition: used, mileage: 169,689 km, power: 120 kW (163.15 HP), first registration: 01/2018, fuel type: diesel, empty load weight: 2,581 kg, maximum load weight: 919 kg, overall weight: 3,500 kg, axle configuration: 4x4, wheelbase: 3,665 mm, fuel: diesel, CO₂ emissions: 216 g/km, fuel consumption (urban): 9.7 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 8.3 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 6, total length: 6,156 mm, loading space length: 2,700 mm, loading space width: 2,030 mm, loading space height: 400 mm, Equipment: air conditioning, airbag, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, traction control, trailer coupling, Disc brakes, aluminum loading flaps, interior trim, wooden loading floor, double cab, reinforced suspension, tachograph, heat-insulating glass, clock & tachometer, brake pad indicator, 4-door, 1st owner, green environmental badge (4), steel rims, spare wheel, black, 6-speed gearbox, passenger airbag, electric windows (2), radio, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, comfort seats, center armrest, German version, additional equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. AR3 axle ratio i = 4.182 BB9 electronic stability program (ESP9i) C21 rear spring, two-stage C42 stabilizer, rear axle, under frame C45 stabilizer, reinforced on front axle C71 underride protection, EC E33 battery management E43 trailer socket, 13-pin ED8 electrical pre-wiring, parameterizable special module EK1 terminal block for electrical connection EL8 2-way front speakers EN6 Audio 10 ES0 jump start – contact F35 rear window F61 interior mirror F66 lockable glove compartment F68 heated and electrically adjustable exterior mirrors FF0 coat hooks in the passenger compartment FF5 storage compartment above the windshield FU5 exterior mirrors without indicators GD8 6-speed manual gearbox, ECO Gear H00 warm air duct to the passenger compartment H04 thermal insulation, driver’s cab H12 hot water auxiliary heater H20 heat-insulating glass, all around HH9 semi-automatic TEMPMATIC climate control IK0 complete vehicle J58 seat belt warning system for driver’s seat J65 outside temperature display JA8 crosswind assist JD2 digital tachograph, EC, with download capability JG0 gear shift indicator JV7 pre-wiring for sound system JW6 service interval indicator ASSYST KA8 particulate sensor KB0 main tank 100 liters KL1 fuel level sensor for auxiliary heater KP1 fuel pump, electric, controlled L44 turn signals, side, front L72 electrical system for external superstructure LB1 side marker lights LE1 adaptive brake Gsdpfjz Ituxjx Afrjuh