Used Tape Applicator for sale (8,528)

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Bdjdpfx Aecudizedrod Cost of delivery Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: new, PREMIUM 1 – Conveyor belt available immediately – no waiting periods! BETTER PRICE: 10 pieces – 10% discount BETTER PRICE: 24 pieces – 20% discount 1000 tapes in stock Aramid polyester ironing belt Premium 1 • Heat-resistant, very robust and highly tear-resistant, usable up to 180°C • For steam ironers, recommended for high-power ironers • Weldable • 400 m per roll, 13 mm wide Bdsdpfx Adozd Ay Serod Aramid-polyester ironing belt, aramid/polyester ironing belt • Heat-resistant, highly tear-resistant, up to 180°C • For steam ironers, recommended for high-power ironers • Weldable • 400 m roll, 13 mm width

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA Bdodpfx Adsuzv E Rered YOM 2006 FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23: YOM 2016 VERSION 300v Bjdpow Nqn Nofx Adredd 15.600 RUNNING HOURS PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. EXCELLENT CONDITION EXCELLENT CONDITION, READY FOR SHIPPING

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. Bedex R N Uropfx Adredd The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Bedpjxy Tmuefx Adrjdd

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min Bdjdey Sccfspfx Adrod - electrical connection: 400V/N/PE/50Hz, 3,6kW - Two lanes Additional information - best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) - conveyor for packages available

Condition: used, Year of construction: 2001, Overview Bjdpfxey Scb Uj Adrodd The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 5,1kW - Two lanes Additional information - conveyor for packages available

Condition: used, Year of construction: 2002, Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Bjdpfxsy Hkhfe Adredd - Manufacturer: Twin Pack - Model: MDEL - Machine type: Handle applicator (carry handle machine) - Year of manufacture: 2002 - Application: Application of carry handles for beverage multipacks - Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment - Automatic carry handle application system - Suitable for various multipack configurations - Integration capability into existing bottling and packaging lines

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Bsdpfx Adoy Etdgorsdd Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Condition: used, Year of construction: 2014, Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Technical data  - Total output: 60 cycles/min - one lane - length 3660 mm | width 1790 mm | height 2500 mm - recommend specifications: - Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% - Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm) Bedpfjyb Sm Djx Adrjdd

Year of construction: 2026, condition: new, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. More future security. The COLUMBUS Pioneer is not just a vacuum press, but a well-designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Form bending * Laminating * Thermoforming * Solid surface materials * Curved and complex workpieces Bodpezhr Uysfx Adrodd Why choose COLUMBUS? Many businesses discover completely new uses and additional orders within a short time because the Pioneer makes jobs economical that were previously turned down. Your advantages: * Modular system – grows with your business * Lifetime warranty on the machine structure * Heavy-duty industrial construction for decades of use * Columbus 360° included: Practical expertise, master manual, and AI support for maximum application safety * Premium components from BECKER, FESTO and SIEMENS * Simple operation and reproducible results Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin worktop * Smooth-running swivel castors Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Viewing and personal consultation available by appointment.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Smoothing Machine 19.06.6512 TYPE TF/P Plus Max. working width 150 mm Max. height 120 mm Adjustable feed speed, max. 140 m/min Top pressure rollers with drive, x 6 Pressure force adjustment via pneumatics Bottom rollers with drive, x 6 CE marking Year of manufacture 2013 Product description: - Paint without waste. - Robust and efficient transport system with 6 motorized pressure units. - Various application heads guarantee results, even for filling and defect repair products. Designed for continuous application of bolo, gesso, and paint on strips, picture frames, and profiles with an extrusion system, using a correspondingly shaped steel counter-template. Construction made of steel sheet and tubular steel. Guaranteed forward movement via No. 6 bottom metal rollers and No. 6 top rubber pressure wheels, variable with adjustable speed via an inverter. The top pressure wheels are mounted on freewheel bearings to reduce uneven wear. Pneumatic distribution panel equipped with a selector for engaging the top pressure wheels and appropriate independent pressure regulators. OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: Bjdeytc Rkjpfx Adredd 1. Profiling machine for grinding wheels and silicone wheels, Italian company MAKOR, price €1,500 - Model: SAG 100 - Year of manufacture: 2003 - Serial number: 10447 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Machine dimensions: 1700 mm x 800 mm x 1800 mm - Weight: 280 kg 2. MAKOR ST/100 FOIL SLITTER, price €1,200 3. MAKOR TEP 3000 BELT CONVEYOR, price €700

Condition: good (used), APPLICATION BELT with VIBRATING feeder Bdodpfx Adjtp Hd Ujrsd Used machine A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Transport speed: 15 m/min

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Bdodpfx Adsy E Avlorsd Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, DGUV certified until: 08/2028, type of input current: three-phase, total length: 840 mm, total width: 2,700 mm, total height: 1,180 mm, input frequency: 50 Hz, space requirement height: 1,180 mm, space requirement length: 840 mm, space requirement width: 2,700 mm, NEW ++ NEW TOP Coating Machine NEW ++ NEW TOP model with a four-layer, high-quality coating Mobile machine made of stainless steel with locking rollers for coating sheet metal 580 x 980 mm best quality for your product! Connection 400 V, 16A-CEE plug NEW machine with warranty + spare parts service Optional: Leasing & rental service - Tank heater 3 kW - Roller salt applicator with guide chute - Maintenance contract - Service package - Delivery service Bdodpfx Ajucnibodrsd - Training & commissioning More TOP coating machines in stock!

Condition: new, Year of construction: 2026, Adhesive tape dispenser, programmable. Activation: Manually via button press or Automatically via light sensor. Adhesive tape length can be adjusted individually, with millimeter precision. Bsdpfx Aozhl I Todredd For adhesive tape rolls up to 5 cm wide. Knife blades are hardened.

Condition: excellent (used), Catalogue number 7721 Bdjdjy S Advjpfx Adred TECHNICAL DATA - Working width: 1300 mm - Max. pass-through height: 60 mm - Rubber rollers: 2 pcs - Rubber roller diameter: 190 mm - Motor approx. 1.1 kW - Dimensions (L/W/H): 2020x770x1260 mm - Weight: 500 kg ADVANTAGES – used glue applicator – condition: very good Net price: 14,900 PLN Net price: 3,540 EUR depending on 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: excellent (used), OptiCoater 600 in lovely condition. Perfect for high throughput coating lines. Bdjdov Ig Rgspfx Adred

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to Bdodpfx Aezdyh Hjdred rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Bsdpfx Adoux Sfzerjdd Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Belt width: 400 mm Axle distance: 708 mm Deflection roller: 68 mm Funding speed: 1.9 m/sec Engine power: 0.55 kW Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Bdodpfx Adjk Aa Rnered Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: ready for operation (used), functionality: fully functional, Cap sorting and automatic application system for bottle caps, jar lids, etc. Bjdpfx Adezgfdxjrodd

Condition: like new (used), functionality: fully functional, Combination in as-new condition (hose L=3m and applicator gun are new), the glue unit has hardly been used. This unit features a 5 kg tank and two hose connections. The unit is equipped with a gear pump, ensuring a consistent and even output (no dead stroke as with an air pump). Now offered at a special price for this combination. Bdodpfx Asxr Itasdred

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW Bdsdpfx Adozc Nmwerjd - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)