Used Electric Tapping Machine for sale (86,911)

Condition: excellent (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire cutting machine (2018) in very good condition, in constant use, fully functional and ready to work – very little used (2700 hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control: Mitsubishi M700 series Axis travel range: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1050 × 800 × 295 mm Max. workpiece weight: 1500 kg Worktable: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 µm Power supply and cooling – complete, functional Machine dimensions: 2687 × 3030 × 2150 mm Weight: approx. 3500 kg Equipment and accessories: Original wire guides - upper and lower Automatic Wire Threading (AWT) Filter tank with ion exchange resin Complete set of mounting and supporting devices (in a carrying case) Wire alignment device Original documentation and operating manuals Additional equipment purchased for over €10,000: Wire guides for angle cutting - upper and lower 30 degrees Processor battery Precision vice for clamping workpieces Csdpj Agggyjfx Aiieri 0-600 PSI pressure gauge - 2 pcs MV power contact (259320) - 2 pcs Nlsbiawhcsxu Hvleloa CF card with software 0.25 mm EDM wire - 3 new spools 2 sets of new filters Machine transport and handling system. Machine Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Filtration and cooling systems are included. We can assist with transport, setup, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price is negotiable. I will issue a VAT invoice, export 0%.

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Crsdpfx Ae Ahqyxoiiei Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Condition: excellent (used), For sale: Constantin Hang 162.01 electric riveting/eyeleting machine from a reputable German manufacturer. This machine is designed for making riveted joints and installing eyelets in paper, cardboard, leather, fabrics, tarpaulins, and other materials. Its robust construction and precise head ensure high accuracy and repeatability. Technical specifications: * Manufacturer: Constantin Hang Maschinenfabrik * Model: 162.01 * Serial number: 40 031 * Country of origin: Germany * Type: electric riveting/eyeleting machine Csdpfxoz Sm Trj Aiiori * Control: foot pedal * Drive: electric * Large work table with guides * Stable construction * Working head marked: 24/4 × 6–8 * Working reach: approx. 620 mm Applications: * Installation of metal eyelets, * riveting of components, * production of binders and folders, * bookbinding, * leather goods, * textiles, * banners and tarpaulins (with appropriate tooling), * production of technical components. Condition: * Used. * Functional. * Shows normal signs of use, as visible in the photos. * Sold in the exact condition as shown in the photographs.

Condition: used, Bench-top drilling and threading machine IXION, type BT 15 GL Machine no. Year of manufacture approx. 1975 Drilling capacity 15 mm Spindle mount Taper mount B 16 Threading range from M 2.5 to M10 Overhang 200 mm Quill stroke 90 mm Table size 285 x 220 mm Column diameter Ø 75 mm Spindle speed 320 - 1600 rpm, 4 steps Csds Ah Ikcepfx Aiisri Motor power 0.55 kW Mains connection 380 volts, 50 Hz - Spindle speed controlled via 4 V-belt steps - Equipped with FAHRION GH 10 threading chuck - With lead screw guide for thread pitch; operation without the lead screw guide is also possible - Height adjustment of the drilling head via hand crank - Column extends downwards from the table top for drilling head height adjustment Space requirement L x W x H 650 x 420 x 900 mm Weight 86 kg Good condition

Condition: excellent (used), CATALOG NUMBER 8143 Technical data: Crsdpj Ah E Nkefx Aiioi Circular saw: - max. saw blade diameter 300mm - adjustable blade, front/rear - motor approx. 3.4kW - dust extraction port diameter 70mm Router: - spindle: - spindle diameter 40mm - spindle working height 180mm - locked spindle - motor 11kW - 2 types of rotational speeds 4000, 6000 rpm - electric saw brake - pneumatic material clamping on the carriage, 2 pcs from above and 2 pcs from the side - side carriage adjustable up/down, front/rear and at an angle - retractable support from the table - angle ruler - electric carriage feed - dust extraction port diameter 190mm - dimensions length/width/height 2950mm x 1700x 1630mm – weight 920kg ADVANTAGES - Polish production - electric carriage feed - upper control panel - used router, very good condition Net price: 17,900 PLN Net price: 4,163 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Cedpfxoz Sm N Ts Aiisri Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: excellent (used), Year of construction: 1982, TOYOSK 01B-T fixed spindle 12-spindle drilling machine Year of manufacture: 1982 Speed ​​(3 stages): 440 / 700 / 990 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs Tool holder type: spring/clamp chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) Cjdowh S E Ujpfx Aiieri

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ASCO APM 40 Automatic Dry Ice Block & Slice Wrapping Machine. For sale: a used ASCO APM 40 automatic wrapping machine, specifically designed for wrapping dry ice blocks and slices. The machine is in fully functional condition. Product-contact parts are made of stainless steel. It features automatic conveyor pitch adjustment, torque-controlled motors, and electronically controlled sealing temperature, displayed on the screen. The control panel includes visual alarms and a self-diagnostic function. Technical specifications: - Manufacturer: ASCO - Model: APM 40 - Year of manufacture: 2009 - Condition: Used, fully functional - Working speed: Up to 25 wraps per minute Credpfx Aezxggleiioi - Film speed: Up to 25 meters per minute - Maximum wrapping width: 250 mm - Maximum wrapping height: 60 mm - Wrapping lengths: 40–260 mm, 140–580 mm, or 200–800 mm - Compressed air: 4–5 bar - Standard version: Right-hand operation - Location: Noordwijkerhout, Netherlands Suitable for dry ice producers and suppliers who want to automatically wrap dry ice blocks or slices. Contact us for more information. ASCO APM 40, ASCO APM40, ASCO automatic wrapping machine, ASCO dry ice wrapping machine, dry ice block wrapping machine, dry ice slice wrapping machine, dry ice disc wrapping machine, dry ice packaging machine, dry ice block packaging machine, dry ice slice packaging machine, automatic dry ice wrapper, dry ice block wrapper, dry ice slice wrapper, dry ice packaging equipment, dry ice wrapping equipment, dry ice film wrapping machine, dry ice block packer, dry ice packaging line, industrial dry ice packaging machine, used dry ice wrapping machine, used ASCO wrapping machine, dry ice CO2 block wrapping machine. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Crsdpoxx Nkyefx Aiiei Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Condition: good (used), Year of construction: 2011, _Technical specifications:_ • Clamping force: 420 tons (4,200 kN) • Injection unit: 3440 • Screw diameter: 80 mm • Screw L/D ratio: 25 • Maximum injection speed: 300 mm/s • Maximum screw speed: 280/240 rpm • Ejector force: 120 kN (boost 180 kN) • Reinforced clamping drive Crsde Ah Dvkspfx Aiioi • Dry cycle time:

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Cedpfx Aijwwq S Seijri Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer with 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 16.10. Codpfx Aioyzxd Deijri

Condition: excellent (used), Year of construction: 1984, TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Cjdpfx Ajwifdgeiijri Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, VOLUMEC Electric Tapping Machine Cedpfx Aeyia Txjiisri Model: JT3750M EVO2 – Made in Italy Configured as follows: Balanced 3-arm jointed system made from special aluminum Adjustable angle head for tapping threads in any position Includes alignment magnet Brushless technology electric motor, 220 V Simple speed adjustment via potentiometer Quick-change holder, size 3 Table mounting column Technical documentation CE-compliant version Technical data: Tapping capacity in steel: M8 – M36 Speed: 10 – 150 rpm Max. working radius: 1,900 mm Holder: Size 3 Weight: 25 kg Including the following special accessories: VOLUMEC automatic lubrication system VOLUMEC touchscreen control VASTC Subject to errors and prior sale!

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of eroding time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional control unit Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck Codpfx Aiozkftboijri CO2 fire extinguishing system

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Codjz Nxxyjpfx Aiiori Total height: 800 mm Weight: approx 100 kg

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Cjdjwww Sxjpfx Aiisri Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Crjdpexl Hi Tsfx Aiiei

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld, multifunctional handheld control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High Speed Jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 24.09. Csdpfezvctpox Aiiori

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 General overhaul: August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - fine and rough machining generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min. Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Cjdpsz Azk Hefx Aiiori Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 10/15

Condition: new, thread dia. M16 - M42 metrisch 50 - 200 U/min. working area max. 1300 mm engine output 1,2 kW Credjwinywjpfx Aiiji weight 105 kg dimensions 0,85 x 0,85 x 0,3 mm Electric tapping machines for M16 - M42 threads, Angle adjustable. 8 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Crsdpjzx Hkksfx Aiioi

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. AUTOMATIC DOOR. FANUC ROTARY TABLE. CHILLER UNIT. Crjdpfx Aijz Hw Hcjiji Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum dimensions of the part to be machined: 730 x 585 x 250 mm. Maximum weight of the part to be machined: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA ROBOT. VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum load: 10 kg. Maximum arm length: 1,249 mm.

Condition: new, thread dia. M5 - M24 metrisch max. 200 U/min. working area max. 1200 mm engine output 1,2 kW weight 25 kg dimensions 740 x 800 x 400 mm Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Cedpfx Aievblh Roisri Options: Clamping table with grooves Type: FL-WB

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Includes connection for cutting oil supply! Adjustable angle. Quick-change chuck with slip clutch. Display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Documentation in English! Optional: Tiller table type: FL-WB Csdet Eahpepfx Aiijri