Used Pot Tape Drilling Machine for sale (65,559)

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Lhedew I Ugtepfx Aiish Location: Röllbach

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) Lhsdpfx Aiew I Uwxsieh 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Availability: by arrangement Ledpfx Aiew I Um Tsiehh Location: Solingen

Condition: good (used), Year of construction: 1995, Top-hole drilling machine, Grass ECO Press Year of manufacture: 1995 Serial number: 9502665 in good condition Right and left linear guides (Work table can be included) Weight approx. 45 kg 380 V - 50 Hz - 2.5 A Pneumatic connection - max. 6 bar CE marked Lodok D T Ncopfx Aiishh

Condition: excellent (used), IM Very good condition. Lhsdjvcyznopfx Aiioh

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, Ganomat Selekta and Case Clamp We are offering a Ganomat Selekta machine as well as a case clamp for sale. Both machines have only been used for a few days and are therefore in excellent, almost new condition. Lsdpfx Aew U Nxweiiehh Location: Bosnia and Herzegovina For further information or pictures, please feel free to contact us.

Year of construction: 1986, condition: used, • Working length (mm): 3200 • Drilling units: 3 from below, with a 3-spindle drilling head Lsdpfxs Drmxs Aiiehh • Clamping cylinders: 2 from above • Pressure cylinder: 1 on the side • Control system: Siemens, newer model

Condition: good (used), Year of construction: 2008, functionality: fully functional, Types:801 Machine nr:112884 Stop 2,29 Kw Stop and feed Ledpsubxzrofx Aiiehh

Condition: used, Drill and tapping machine FLOTT, type TBZ 15 GL Serial No. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle mount MK2 Overhang 195 mm Quill stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm, 18 steps Motor power 0.55 + 0.75 kW Power connection 380 Volt, 50 Hz - Drilling spindle speed controlled via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the drilling spindle - Drilling head height adjustment via hand crank with rack and pinion on the column - Tapping attachment with guide chuck and switchover for right-hand and left-hand threads Lhedpfx Aodzp S Njiieh - 3 guide chucks for right-hand threads 0.7mm + 0.8mm and 28G available - Tapping possible with and without guide chuck - 1 toothed chuck for drill bits Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base Space required L x W x H 700 x 350 x 1850 mm Weight 165 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. Lsdpjyy Rn Sjfx Aiiohh * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Ledpfjzgvmqox Aiishh Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: - Number of drilling spindles: 21 pcs. with 32 mm spacing - Drilling direction: Bottom and end face - Swivel range: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs. Lhedpjy Tczksfx Aiijh - Passage: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Diameter of dust extraction: 120 mm - Includes a variety of stops (see pictures) Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Lodpow I Uy Tjfx Aiishh Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Lhjdpfoy Ih Tzjx Aiijh Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit Lhodpfx Aioyamc Doijh This item is an unused display unit.

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Lodpfxow Naabs Aiiehh Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Lhodpfx Aisw Rhk Reioh Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Ljdpfxjv Ntb Ie Aiijhh Bit This item is an unused display unit.

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control Lsdpfx Aiew Nabxeiohh NRW

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Lhedpfx Aiey Ih Sksioh Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t Lhedpfxszgdfbo Aiish

Condition: used, Year of construction: 1970, Technical details: Ljdpfx Aozgcx Hjiishh bore stroke: 170 mm total power requirement: 3,5 kW dimensions of the machine ca.: 0,75 x 1,10 m

Condition: used, functionality: fully functional, Comec FMC 900 Drilling Machine Automatic loading from a magazine Number of spindles: 4 Main motor power: 4 kW Lhsdpfx Aijzga Eqjijh Maximum element length: 900 mm Maximum element width: 100 mm Maximum drilling distance: 800 mm Application: Suitable for large-scale production of chairs, beds, cots, and components for other furniture.

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Ledpjzgaiisfx Aiiehh Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, TECHNICAL DETAILS Number of upper units: 4 Lhjdezf Ibwjpfx Aiijh With NC positioning: yes Lateral horizontal units: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control system: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8649