Used Glasse Machine for sale (67,016)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Isdpfx Aeh Ek H Sea Esid Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 500-009096, overall weight: 510 kg, space requirement width: 1,000 mm, power: 1.5 kW (2.04 HP), Equipment: documentation/manual, Lisec frame filler Ready for operation Already converted to use 4mm drill bits! Iisdszlqxxjpfx Aa Eod

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, automatic glass cutting table for half jumbo sizes : 3710 x 2600 mm machine sizes : 3400 x 4250 mm Iijdpfezlpl Dox Aa Eed total power : 19 Kw glass thikness : 3 - 19 mm cutting tolerance : +/- 0,25 mm weight : 1900 kg possible to cut vinyl and scan template with laser automatic reading glass thikness , automatic adjustment cutting pressure possible laminated glass cut

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, refurbished in 2023 Iiodpfx Aaezk Ew To Eod NEW: - slides on both sides - conveyor - conveyor slats - tool kit

Condition: good (used), Year of construction: 2006, total length: 16,500 mm, - washing machine (requires renovation) Iijdpfx Aaezk A Hxs Eod - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table - year: 2006 - line length: 16.5 m - direction: right to left

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Bavelloni Gemy V10 vertical straight-line grinding machine with 10 spindles and a variable mitre function, in fully refurbished condition. The machine features an extended infeed and outfeed. Only original parts were used during the refurbishment. Iedpfszkumdjx Aa Eoid

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Iijdsw R Tvxepfx Aa Esd

Condition: good (used), Year of construction: 1993, EL. connected load: 44.2 kW 6 washing brushes/good condition Working direction: right/left Washing height: 2500 mm Inlet to washing machine l=3200 mm Outlet to washing machine l=1100 mm Iiedpjwx H Tbefx Aa Eod

Condition: used, Year of construction: 2019, functionality: fully functional, LISEC INSULATED GLASS LINE – Year 2019 LISEC IGU LINE H 2500 mm LH/RH Max. glass size: h2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Thickness of flexible spacer: 8-25 mm Composed of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes LISEC RSVN-35/25U - automatic vertical station for inspection and positioning of spacer frames LISEC VSA-35/25 - fully automatic vertical system for the application of flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner LISEC FPS-35/25U2B - fully automatic vertical press for lamination, flat pressing, and gas filling (Argon or Krypton) LISEC VL-1N/25 - fully automatic vertical extrusion and sealing robot LISEC DOS-1TH - high-pressure dispensing and mixing station for two-component sealants (such as polyurethane, polysulfide, or silicone). Ijdpszhm Smefx Aa Esid

Condition: used, scoring head, glass cutting table, glass cutting table, glass cutting machine Isdjb Nfcuopfx Aa Ejid -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Iiedpfx Aajxap Axo Esd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 314-042581, Lisec Washing Machine VHW - 25/6M - Year: 2008 - Weight: 4,878 kg - Power: 75.10 A - Brushes: 6 - Includes pre-wash zone - Glass thickness: 3-20 mm Ijdpozkapwsfx Aa Ejid

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! 8 brushes, Iisdpfxeqc Udio Aa Eod Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Condition: repair required (used), Year of construction: 2008, For sale: Bottero Technopower CNC glass processing center. The machine is currently not operational and requires an interchangeable distributor subassembly part, as well as a few smaller components. The machine has been completely refurbished, but the owner did not purchase the aforementioned part needed to get it running. Iodpszh Uncofx Aa Eeid The machine is being sold in its current condition. Disassembly, loading, and transportation of the machine are the responsibility of the buyer. Available for immediate removal!

Condition: used, Year of construction: 2009, REINHARDT-TECNIK ECOSTAR 250 Iiedozhxy Aspfx Aa Eed

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 41027512-14, total length: 11,900 mm, total height: 3,600 mm, overall weight: 4,100 kg, input voltage: 400 V, power: 30 kW (40.79 HP), Szlifierka BOVONE ELB10 Rok produkcji 2014. Najlepsza krawędziarka na światowym rynku. Charakteryzuje się bardzo sztywnym korpusem. Posiada przenośnik wjazdowy i wyjazdowy o udźwigu 800 kg. - Po Generalnym remoncie (2025 r) Iijdpeyv Uprofx Aa Esd - Rozebrana do gołego korpus, zregenerowane sanie, wrzeciona, wymienione wszystkie uszkodzone elementy m.in. takie jak, bieżnia dolna tylnej belki, nawroty tylnej belki, nowe tylne klepki, listwy prowadzące przedniego pasa, (przednie klepki 2023r.), nowe łożyska na kołach przenośnika wjazdowego i wyjazdowego, zregenerowane myjki traków, nowy olej w napędzie głównym, nowy pas zębaty na przenośniku wyjazdowym. Maszyna kompletna z dodatkowym wyposażeniem takim jak przedłużany wjazd, wyjazd, podwyższana, majka pasa przedniego i tylnego, sprzęgło przenośnika wjazdowego, zwiększona możliwość szlifowania do 50 mm grubości szkła Wszystkie rzeczy które wymagały naprawy lub wymiany zostały wykonane na oryginalnych częściach przez autoryzowany serwis. Możliwość przyjechania sprawdzenia i wykonania prób. Maszyna jest technologicznie gwarancją wysokiej jakości szlifu, jest nie do zniszczenia. Przybliżone wymiary zewnętrzne Długość 11900 mm Szerokość 1200 mm Wysokość 2900 mm Całkowity ciężar linii 4100 kg Zapotrzebowanie prądowe: moc 30 kW Wymiary szkła o maksymalnej grubości 6 mm 40 x 40 mm Wymiary szkła o grubości nie większej niż 20 mm 50 x 50 mm lub 40 x 80 mm Grubości nadające się do obróbki Od 2 do 50 mm Prędkość przesuwu Zmienna od 0,35 do 5,4 m/min Wysokość płaszczyzny roboczej 850mm

Condition: new, Year of construction: 2023, functionality: fully functional, Sigmatek Central Processing Unit DCP646, new part originally packed 100MHz, 2MB memory HW: 5.6 X1.1 Iodpfx Aaezhg Ibj Eeid SW: 97030C-72

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: RSV-27/25, 1992, frame set section PSL-25/20, 1994, assembling station Iodpfxortp D Ae Aa Eoid Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Condition: new, Year of construction: 2011, functionality: fully functional, input voltage: 24 V, Lisec catalyst pump for 20 liter drums, complete unit. Can be used for PS as well as PU with paste catalyst Sold EXW our warehouse in Hungary Iiodpfswuq Ubex Aa Esd

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm Iijdpey If Ayefx Aa Eod - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Mangle Dimensions 5500x2800 mm Iiedpoy I Sd Rjfx Aa Eed

Condition: used, Year of construction: 2007, functionality: fully functional, BATTELLINO FP5 – Year 2011 Straight Line Edging Machine Number of wheels: 5 Min. glass thickness: 3 mm Max. glass thickness: 20 mm Min. glass dimensions: 80 x 80 mm Max. glass weight: 200 kg Speed: 0-4 m/min Machine dimensions: 5458 x 811 x 2087 h mm Worktable height: 830 mm Machine body: 2037 x 811 mm Input arm length: 1707 mm Output arm length: 1707 mm Weight: 1600 kg Power: 8.3 kW Isdpfjzb Dzasx Aa Esid Water tank capacity: 200 lt Air pressure requirement: 6 bar Glass linearity: 0.1 mm per 2 meters of glass

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, CE Glass 1600mm vertical glass washing and drying machine. The machine is serviced, thoroughly inspected, and ready for immediate use. Iodpfex A Uq Hjx Aa Ejid Fitted with new water squeegee rubbers and new bearings. Working direction: right to left Max. washable glass height: 1600 mm Number of brushes: 4 Dryer fan Stainless steel cabin Water heating Background lighting Stop sensor The machine is fully checked, cleaned, and can be viewed in perfectly working condition at our site!

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Ijdpsymgflofx Aa Esid Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.

Condition: good (used), Year of construction: 2010, Straight line edging machine - mitering from 0° to 45°, SCHIATTI Type FPS SME 10, Year 2010 Isdpfx Aowrdfzoa Eoid