Used Tube Production for sale (18,658)

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. Hfodpezt A H Rsfx Agtsl It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Hfodpfx Ajzul Sfegtsl

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Hfsdpfx Aoi Akrksgtol Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features Hfedpfx Aeit N Rvegtsl • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Hsdjzuz H Sepfx Agtjfl Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: good (used), Year of construction: 1992, Manufacturer - ERW Year - 1992 Range of round pipe - 21 - 76 mm Range of square pipe - 20x20 - 60x60 mm Sheet thickness - 0,8 - 3,5 mm Speed - 60 m/min. Lenght of line - 50 m Hjdpfxedlqkqj Agtsfl Tools : square pipes - 25,32,38mm round pipes - 40, 51 mm Welding power - 180 KW Anode voltage - 14 kv Anode dissipation - 70 kw Frequency - up to 30 Mhz

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, nominal power: 5.5 kW (7.48 HP), pipe diameter (max.): 1,600 mm, rotational speed (distance/time): 36,000 mm/min, sheet thickness (max.): 2 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, Equipment: emergency stop, scorer, HVAC – Spiral duct forming machine (SPIRO) for sheet metal, length 120–8000 mm, strip width 137 mm, sheet thickness: galvanized 0.4–1.2 mm / stainless steel 0.4–0.8 mm / aluminium 0.5–1.5 mm / copper 0.5–1.2 mm, speed 1–36 m/min, PLC, cutting with saw blade (4 kW), main drive 5.5 kW. This machine is the heart of production: it feeds the strip and outputs spiral ducts at high speed. Spiro duct diameter 80–1600 mm. Includes spare guide rollers and strip bars for various duct diameters. More information available on our website. Pictured in transport configuration. Hfsdpfxsykpb Ro Agtol

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: SRC12NC0423, controller manufacturer: Siemens, overall weight: 700 kg, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 70 l, operating pressure: 210 bar, number of digital displays: 1, Equipment: emergency stop, Tube Expanding/Reducing Machine PE-TRA SRC-12 NC We offer a used, fully functional PETRA SRC-12 NC machine for hydraulic tube end expanding/reducing. The machine is designed for professional industrial applications. The machine features 12 expanding stations, enabling multi-stage forming processes. The design was developed with demanding industrial applications in mind, including the production of tubular structures, the shipbuilding industry, industrial installations, and the production of exhaust systems. Key features: - Manufacturer: PETRA - Model: SRC-12 NC - Used machine - 12 expanding stations - Hydraulic drive system - Hydraulic system power: 4.5 kW - Maximum hydraulic pressure: 210 bar - Hydraulic tank: 70 l - Control: Siemens PLC + HMI - Operator panel with touchscreen - Simple selection and adjustment of tool stations - Programmable and adjustable expanding sequences - Foot control - Power supply: 380 V / 3 phases / 50 Hz - Robust construction for industrial applications Applications: - Production of tubes and tubular components Hfodpfx Aezy I H Nsgtsl - Shipbuilding industry - Industrial installations - Production of exhaust systems - Forming and expanding tube ends Transportation is the responsibility of the buyer.

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer Hfedpfoy R I Tmsx Agtsl * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and sealing machine - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Hot-air system for tube sealing - Temperature control for hot air - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available - Documentation available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Hfsdpfx Aszyu R Uegtjl Net weight: approx. 300 kg APPLICATION Suitable for filling and sealing plastic tubes. The machine is particularly well-suited for creams, gels, ointments, pastes, and other liquid to viscous products, depending on the product and the installed dosing configuration. CONDITION Used machine in good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. The exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available upon request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 20210330-2, control type: CNC control, pipe diameter (max.): 63 mm, pipe length (max.): 2,600 mm, bending angle (max.): 190 °, bending radius (max.): 350 mm, bending radius (min.): 25 mm, overall weight: 3,000 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 1,350 mm, CNC 63CNC AUTOMATIC MANDREL BENDING MACHINE – FOR TUBES AND PROFILES For sale: CNC 63CNC automatic mandrel bending machine, designed for precise bending of tubes and profiles. The machine is equipped with CNC/PLC control with a touchscreen and the ability to save bending programs. TECHNICAL DATA: Hjdpfxszy Rgxs Agtsfl -Maximum diameter / material dimension: Ø63 × 4 mm -Bending radius: 25–350 mm -Bending angle range: 0–190° -Effective length on the mandrel: 2600 mm -Motor power: 7.5 kW -Maximum pressure: 160 kg/cm² -Machine dimensions: 5000 × 1200 × 1350 mm -Weight: approx. 3000 kg EQUIPMENT AND FUNCTIONS: -PLC control with touchscreen -Automatic and manual mode -Diagnostic system -Full hydraulic clamping -Up to 100 programs, each with up to 20 bending operations -Independently programmable speeds of axes Y, B, and C -Programmable material springback compensation -Automatic release of the tube before final bending -Cycle start via foot pedal -Air cooling The machine enables repeatable, precise bending and is designed for production applications where efficiency and process repeatability are essential. Transportation is the buyer's responsibility.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria. Hfjdpozgck Nsfx Agtol

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Hedpfx Agoz Alpmjtjfl Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: used, Type Production Line Radiator production line Hfsdpfjzpbl Dsx Agtjl Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Hsdpsztq Hxsfx Agtefl Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Hodpfx Agoy Aggpstsfl Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, ANIGAS fire-tube steam boiler equipped with an automatic RAY burner, EG Series, designed to operate on natural gas. TECHNICAL DATA Manufacturer: ANIGAS Boiler type: Fire-tube steam boiler Fuel: Natural gas Total volume: 25,000 litres Steam production capacity: 9,000 kg/h Maximum allowable pressure (PS): 25 bar Hsdpfx Agjzvf I Njtsfl Maximum operating temperature: 229 °C Manufacturing number: 77501-1 Burner: Automatic RAY burner Burner series: EG Rated power: 6,771 kW

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Hfjdpfx Asvugv Asgtol Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: new, functionality: fully functional, Year of construction: 2025, warranty duration: 60 months, Effective Tube Cutting Length: 6500mm Laser Output Power: 6000w/3000w/2000w/1500w Hjdpog D Nzisfx Agtjfl Effective Round Tube Cutting Diameter: Φ20-360mm Effective Square Tube Cutting Diameter: □20*20-□254*254mm Edge Length: 20-300mm Outer Circle Diameter: ≤360mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 200 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Hodpfx Agey H E Ndstefl Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges 🔩 Condition & Notes - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: CE, laser power: 3,000 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 260 mm, pipe length (max.): 6,050 mm, table length: 6,050 mm, working length: 6,000 mm, power: 3,000 kW (4,078.86 HP), input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME LT-6026TFA Tube Laser System – Maximum Productivity for Tube Processing The ACME LT-6026TFA is a powerful tube and profile laser system for companies that require the highest precision, high processing speeds, and maximum automation in tube processing. Thanks to state-of-the-art fiber laser technology and automatic loading and unloading, the system is ideally suited for series manufacturers, metal fabricators, mechanical engineers, and industrial tube processors. Your advantages at a glance ✔ Fully automatic tube processing for maximum efficiency ✔ Suitable for round, square, rectangular, and special profiles ✔ High cutting quality with minimal post-processing effort ✔ Automatic loading and unloading system for short cycle times ✔ Powerful fiber laser technology for economical cutting ✔ High positioning and repeatability accuracy ✔ Intelligent clamping technology for safe material transport ✔ Optimized for series production and high utilization Technical highlights Tube lengths up to 6,000 mm Tube diameters up to 260 mm Hfedpfxezb Um Tj Agtsl Powerful 3 kW fiber laser Automatic loading and unloading system Precise machining of complex contours and holes Fast changeover times for different tube geometries Modern CNC control system with intuitive operation For which applications is the LT-6026TFA suitable? The system is the ideal solution for: Steel construction Metal construction Mechanical engineering Vehicle construction Furniture industry Agricultural machinery construction Contract manufacturing Tube and profile processing By combining high cutting performance, automated material handling, and reliable process safety, the ACME LT-6026TFA significantly increases productivity while reducing manufacturing costs. Why a tube laser system from ACME? The LT-6026TFA impresses with its robust machine construction, high availability, and economical production. Companies benefit from short cycle times, precise cutting results, and a future-proof automation solution for modern tube processing. Laser Handels und Service GmbH Your partner for tube lasers, flatbed lasers, laser welding technology, spare parts, and service. Consulting, installation, training, and technical support from Germany.

Condition: new, functionality: fully functional, Year of construction: 2026, SENFENG SF6012 PLUS – 3kW Fiber Tube Laser Cutting Machine High productivity, efficient material handling and maximum material utilization The SENFENG SF6012 PLUS is a high-performance fiber laser tube cutting machine designed for efficient series production of small to medium-sized tubes and profiles. Equipped with a 3,000 W MAX Photonics fiber laser source, semi-automatic tube loading and the advanced T PLUS overtravel cutting concept, the machine combines high cutting performance with efficient material handling and minimal residual material. Available for viewing, demonstrations and test cutting in our showroom from October 2026. Why choose Besten Machines? Hjdpfx Ajzwquqegtjfl ✔ Over 25 years of experience in metalworking ✔ Locations in the Netherlands and Germany ✔ Own Dutch and German service engineers ✔ Installation, commissioning and operator training ✔ Technical support and spare parts availability ✔ More than 70 SENFENG machines successfully installed Machine Configuration 3,000 W MAX Photonics fiber laser source BOCI autofocus 2.5D laser cutting head FSCUT3000DE-A CNC control system Cooling system for laser source and cutting head Power stabilizer Semi-automatic loading system up to 6.5 m Loading capacity for up to 5 tube/profile positions Unloading station with 2 m conveyor Optional 3–4 m conveyor TubesT 3D tube nesting software Fully enclosed, CE compliant Technical Specifications Model: SF6012 PLUS Laser power: 3,000 W Laser wavelength: 1060–1080 nm Tube length: 1,000–6,500 mm Round tube: Ø15–Ø120 mm Square tube: 15×15–120×120 mm Maximum tube weight: 120 kg Maximum acceleration: 1.5G Maximum rapid speed: 150 m/min Maximum chuck speed: 240 rpm Positioning accuracy X/Y: ±0.4 mm Repeatability X/Y: ±0.4 mm Power supply: 3×380 V / 50 Hz Protection class: IP54 Dimensions incl. loading system: approx. 9,100 × 2,230 × 2,300 mm Machine weight: approx. 3,400 kg Key Features T PLUS Overtravel Cutting The movable front chuck enables overtravel cutting, minimizing residual tube length and maximizing material utilization. Semi-Automatic Loading Loading system with up to five tube/profile positions for material lengths up to 6.5 m, reducing manual handling while maintaining production flexibility. Servo-Controlled Tube Support Active supports reduce sagging and vibration during processing, improving stability and cutting accuracy. FSCUT & TubesT Software Integrated CNC control combined with 3D nesting software for efficient programming, automatic nesting and material optimization. Automatic Unloading Finished parts are discharged via conveyor for controlled and efficient material handling. Applications Suitable for processing carbon steel, stainless steel and aluminium tubes and profiles. Ideal for machine construction, steel fabrication, furniture production, automotive components, agricultural machinery and general series production. Showroom & Service The SF6012 PLUS 3kW will be available in our showroom from October 2026 for demonstrations and test cutting. Besten Machines provides installation, commissioning, training and after-sales service through our own service team in the Netherlands and Germany. Contact us for a quotation or demonstration. Send us your drawings and material specifications and we can perform a test cut for your application.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: - Infeed mechanism - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 - CNC length profiling machine Unicontrol 12 - Automatic double-part turning and return system Hfodpfex Sqxhjx Agtol - Outfeed buffer The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Hfjdpfxezy Hhxj Agtel Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – Precision Meets Performance The ACME tube and profile laser system represents maximum efficiency and flexibility for modern tube and profile machining. Equipped with four high-precision chucks, vertically positioned guides, and three movable clamping systems, it ensures stable and precise processing of a variety of workpieces. Hfsdsy Ix E Iepfx Agtjl The system is available with multiple machining diameters (Ø 280 mm, 360 mm, 550 mm, 640 mm, and 800 mm), providing maximum adaptability to diverse production requirements. With selectable laser powers of 3 kW, 6 kW, 12 kW, and up to 20 kW as well as a processing length of up to 12 meters, this machine meets the highest industrial demands. High-quality components from renowned manufacturers guarantee durability and process reliability. Of course, the system is CE-compliant and meets all common safety standards. Efficient production workflows are ensured by semi-automatic loading and unloading, complemented by an integrated small parts conveyor belt. The innovative 45° laser head also enables precise cuts even for complex geometries. ACME – Your solution for high-performance tube and profile laser processing at the highest level.