For sale insulating glass sealing table with adapter for small glasses in very good condition.
Btx0jsqoaq
Bender and backfilling machine for spacer for insulated glass units
Nn8qr
Data:
E98wfbux
- Type: TE
- Serial number: 1.110
- Year of construction: 1994
- Weight: 1590 kg
- Power: 400V, 50 Hz, 1.5 kW, 5.2A, 6bar
- from running production
price on request
Hight 6,00 m, length 4,00, lifting capacity max. 630 kg
Btmju7si9r
Important Note: The product displayed herein are new.
Max. Glass Size: 1800×2800mm
Vacuum Bag Dimensions: 2000×3000mm
Number of Bags: 2
Compressed Air Pressure: 8 bar
Vacuum Pressure: 1 bar
Bifmhkkq32
Heating Power: 32KW
Vacuum Pump Power: 1.1KW
Compressor Power: 1.5KW
Amps: 72.9Amp
Power Supply: 380V 50HZ (3+2)phase
Area Occupied: 7280×3780mm
Weight: 2000kg
EVA stands for ethylene-vinyl acetate. This extraordinary adhesive film is non-sticky and inert to water moisture. Handling and glass as...
CE Glass Industries would like to attract your attention for the following possibility. We are one of the biggest glass-processors in Middle-East-Europe since 30 years.
Ysgqxs
CE Glass Industries selling used machines in good condition:
Sealing material Polyurethane
Type of B component Liquid
Type of pump Hydraulic
Volume of A component 200 l
Volume of A component 20 l
Length of arm 2400 mm
Assembled dimension 1000x1500x2400 mm
Voltage 400 V, 50 Hz
Power 5 kW
O...
Desiccant tank capacity: 25 kg.
Btfcevf8ox
Pneumatic tilting.
Line after renovation, working. Available from 1.04.2021
Modernized-production of two-chamber narrow door inserts-100mm ....
Wsmkwuj7
Data:
- Type: RFA
- Serial number: 2.110
- Year of construction: 1994
- Weight: 1000kg
- Power: 400V, 50Hz, 1.5 kW, 5.5A, 6bar
- fitting bender also available
- both machines from running production
Blz9mmd93r
Price on request
Hight 3,00 m, length 3,50 m, lifting capacity max. 500 kg
Opglj3wh
Lisec RTL-20VN 2m stainless steel vertical glass washer with full water circulation (1989)
Lisec roller transfer with inspection and manual frame building
Lisec FPS-25/16U 1600mm gas fill station (2000)
with FPS-U control
Roller out take station
Extraction and RO plant for glass washer
Argon dosing system for gas press
Reinhardt Technik 2 Eco-Star sealant machine (2004)
Jpyge8kh
2 – rotary seal tables
13m cooling conveyor
Autom. IGU Glass production line LiSEC, h=1.6 m,
Gas press / Robot, Right – Left
Max. glass sizes: 2500 x 1600 mm, Year: 1994 / 2000
Jwnz83
- VHW-16/V8, Washing and Drying Machine (8 brushes) with Inlet Conveyor,
- RSV-27/16U, Frame Mounting Station,
- FPS-25/16U, Autom. Gas Filling Press, y. 2000
- VFL-1 + DOS-1TH, Sealing Robot
- Outlet conveyors.
In good condition.
Forel double glazing production line with Super Spacer applicator and three-section hotmelt sealing machine. Max dimension 2500 x 3000 with gassing or 2500 x 4000 with press in two cycle. Possibility to produce one, two and three-chamber glass with a maximum thickness of the package of 50mm, including shapes. The line is equipped with a scanner for quality control of manufactured glass, automatic reading of shapes and control of dimensions of sheets. An additional frame applying station enables ...
Glass-Robot :Automat do uszczelniania szub zespolonych w bardzo dobrym stanie.
Kierunek pracy z lewej do prawej. Max. wysokość 2,3m
Ju8s0u
Data:
Jidkzdr
- Height: 2700 mm
- Infeed and outfeed conveyors as required
Price on request
Washing machine with a washing width of 1600 mm
Oolracln
Product Features:
• Stainless steel washing unit
• Equipped with 2-4 or 6 brushes
• Durable tire transport wheels
• Business direction 'back and forward
• Adjustable working speed with control switch
• Stainless steel water tank
• Adjustable temperature of washing water by digital indicator
• Electrostatic powder coating for long-term protection
Ojkltn8
• Dry fan
Glass thickness 3 - 12 mm
Min. Dimensions 160 x 320 mm
Max Dimensions 3000 x 2000 mm
LiSEC A1RL
Autom. Desiccant Filling Machine for Bent Spacer Frames
Year: 12/1992
380 V – 3N, 50 Hz, 1,1 kW | 6 bar
In very good condition.
Ekerhj9
CE Glass Industries would like to attract your attention for the following possibility. We are one of the biggest glass-processors in Middle-East-Europe since 30 years.
CE Glass Industries selling used machines in good condition:
Max dimension: 1600x2500 mm
Gw0evw
Thickness: 2,3-19 mm
IG unit thickness: 12-52 mm
Line capacity: 60-80 IGU/hour
- Automatic gas filling press
- Sealing robot (PU, PS)
Desicant filling station and butyl extruder is excluded, and no option.
Data:
- Type: RTL 25 V
- Max. Height 2500 mm
Frxryiegi
- Total height: 2800 mm
- Complete line consists of:
- Washing machine:
o Inlet: 2500 mm
o Washing machine: 3300 mm
o Washing height: 2500 mm
o 6 Brushes
- Visiting station: 2600 mm
- Assembly station: 3650 mm
- Roller press Inlet: 2150 mm
- Roller press: 750 mm
- Roller press Outlet: 2500 mm
- Digregorio Kolla 1 Butylier
- Gas filling station AR-FAN
- Hand sealer
- Water purifier Falk
- Lisec Frame filler
- Saw and drill for spacers
- Rot...
Stand alone washing machine with inlet and outlet section, washing hight 2700 mm, working direction right - left
Czlm32n0
Glass washing machine with 6 brushes.
Bh93afqg
Automatic panelprese, max. working dimension is: 2000*2700 mm.
Good condition!
The DFN632 drills the spacer frame externally using 2 drills set at 90° to enable the desiccant material filling, the 2 holes are then hermetically sealed by the application of butyl rubber. The spacer is drilled externally to leave the receiving walls intact. The machine is also capable of managing shaped spacer filling in addition to adapting to the variations in spacer dimensions. 1 to 4 sides of the frame can be filled, above all using either one or both heads. Only one operator is needed to...
Autom. IGU Production line LiSEC, h=1.6 m, Left > Right
Max. glass sizes: 2500 x 1600 mm, Year: 1990
2slhxi
- VHW-16/6, Washing and Drying Machine with Inlet Conveyor,
- Frame Mounting Station,
- PSL-25/16V, Glass Assembly Station,
- FPL-25/16, Autom. Flat Press (without Gas Filling),
- Outlet conveyors.
In very good condition
Machine is in working condition, can be seen and tested at site.
Bending heads for spacer from 6mm up to 24 mm
Shapes
Boom8vkjrq
Network data import
Data:
- Type: PM-45/4
- Serial number: 114.25.20.01 0594
- Weight: 500 kg
- Year of construction: 1994
- with automatic material feed
C2j9gbn3
- with discharge conveyor and grid enclosure
- Power: 380 V, 50 Hz, 6 bar
Price on request
Light over-craning with suction lifter and rail system, swivel range 90° horizontal to vertical, very good condition, load capacity 500 kg
Bslomu9aad
Glass dishwasher in good working order
Loxdtliq
In excellent condition washing machine from the top brand Forel. The machine has been serviced in 2018 and is in very good condition.
Bpvpl2veng
The machine has an assembly part and a roller press.
Machine specifications:
* Automatic inlet part: 3600 mm
* 6 brushes washingpart: 2590 mm
* Brushes Low E compatible
* Automatic out part 2400 mm
* Assembling station part: 3600 mm
* Roller press
* Automatic outpart 3600 mm
LiSEC, Right - Left
Blu2f7zijs
- A2RL-25/25HA, 1995, Fully Autom. Tandem Desiccant Filling Machine for Bent Spacer Frames
- LBH-25AR, 2009, Autom. Butyl-Extruder / Butyl Application System
Very good condition. Dismantled.
Lisec AKL-25V
Condition: Good working order
Height: 2500mm
Bfeupzqlbj
Year: 1996
The Forel line was completely restored with new soft brushes and all vital parts. Consisting of a washing machine, a coupling machine and a pressing machine.
Bb8zon3jvy
Automatic glass loading system for Jumbo sizes, including loading table and a glass rack with 8 stations, for flat and laminated glass
Dxvxpi
Two-component sealing system as good as new
Siliconizing machine from Rheinhardt Technik Conti Flow Vario !
Conti Flow Vario is a precision gear metering system.
Multi-component !
Ogkhefe
Two component sealing system !
Hotmelt extruder machine
Machine specifications:
* Capacity of 50 kg tank
* Adjustable speed for material
* Temperature control systeem in 2 stages
Mcoufaax
* Low temperature safety system
* Sensitive temperature adjustment with pid control system
* Easy adjustable digital temperature system
* Timer system
* reliable and compact hose/gun
2001, LiSEC, BSV-45ANK + PM-45
Automated Bending Machine for Spacer Bars
In very good condition
Bkqpstofff
Make : Lenhardt-Bystronic
Type : 2300x4500mm GWU; AZP.SP.G; DA2.7AE; VATEK
Year : 1993-1998 (reconditioned 2010)
Condition: in production
Description : Washer reconditioned + new brushes 2017 Automatic Gas press reconditioned 2014, up to 60mm units Corc applicator reconditioned 2014 Sealing robot reconditioned 2014
Enc8ifr
Frame bender with drum magazine for 8 profile widths
F9zluzd
Automatic profile bender
High-tech automatic machine to bend the spacer hollow profiles to produce spacer frames in single piece.
The machine can process spacer hollow profiles in aluminum
The machine is basically made up of magazine with 8 feeding stations, main body and control desk panel.
• Magazine (8 feeding stations)
Solid structured steel, coated with two-component anticorrosion paint.
The process starts in the magazine (supply chamber), which is made of 8 feeding station housing the
spa...
Armatec crane system 250Kg
Dimensions:
Lenght: 8,6m
Width: 5,3m
Bgy2a0mbwv
High: 4m
Vertical floatglass-washing machine, working direction left - right, washing hight 2700 mm, glass thickness max. 30 mm, 8 brushes, with inlet and outlet section, for panes up to 5000 mm length. The machine is in a state of readiness for transport.
Br3dp2f8y7
Lisec RZVS-25/25 Automatic butyl extruder
Height: 2500mm
Ix7nwfeae
Roller tilting table, hydraulic, particularly suitable for heavy glass discs, very good condition, external dimensions in horizontal condition: L=5300 mm, W= 2400 mm
Br0liczhqg
