Used Sdj 1000 for sale (11,902)

Condition: good (used), Year of construction: 2014, Riggs 1000 Three head filler Serial: TT1737 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings Pgodpfxeu Tglve Agwou

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm Pgedpfx Aohqqnzjgweu LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Pedpfx Agsww I Tmswegu

Condition: excellent (used), Year of construction: 1989, Langzauner belt sander 1000/1400 Pgodpfx Ajt Ivkregwju large throat on the right side Manual height table adjustment Sanding belt dimensions 6800 x 150 mm right and left run year of construction 1989 Condition checked for function Always approx. 10 pieces in stock

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Psdperivfcsfx Agwsgu Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2011, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Psdjtr Npdspfx Agwogu Empty weight: 15.130 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Serial number: 1200022136 Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Year of construction: 2008, condition: used, 1000L stainless steel tumbler on frame, side discharge door, forward/reverse motion Pgjdjddt N Nopfx Agwou

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Podpohhm Edsfx Agwjgu Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Pgodpfxjq Iq Nbo Agwou

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, turning diameter: 430 mm, travel distance X-axis: 275 mm, travel distance Z-axis: 1,070 mm, swing diameter over bed slide: 680 mm, Version with driven tools TECHNICAL DETAILS Spindle bore: 92 mm Bar diameter: 80 mm X-axis: 275 mm Z-axis: 1,070 mm Pgodpfxowtraij Agwou Turning length: 1,000 mm Turning diameter: 430 mm Swing diameter over bed: 680 mm Number of tool stations: 12 (driven) MACHINE DETAILS Three-jaw chuck: RÖHM D 315 mm Control: Heidenhain Pilot 3190 EQUIPMENT - Hydraulic clamping cylinder

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Pgsdpfevbcxtex Agwju Movie available

Condition: good (used), Year of construction: 1998, feed length X-axis: 1,180 mm, feed length Y-axis: 644 mm, feed length Z-axis: 480 mm, table length: 1,000 mm, table load: 1,000 kg, table width: 595 mm, power: 15 kW (20.39 HP), X - Travel: 1180mm Y - Travel: 644mm Z - Travel: 480mm Table Length: 1000mm Table Width: 595mm Table load: 1000 KG Feed rate X-Axis:30000mm/min. Feed rate Z-Axis:30000mm/min. Power: 15kW Length: 4800mm Psdpjwrx Scjfx Agwegu Width: 2500mm Height: 2700mm Weight: 8000kg

Condition: used, Year of construction: 2016, weight max. in kg 1000 kg Pjdpfx Agou S R Dmjwjgu fork length 1150 mm stroke height 800 mm weight of the machine ca. 145 kg Electric scissor lift pallet truck from Rapid Type: REE.1000 Year of manufacture: 2016 Condition: used, in working order Note: without charging station and without battery!

Year of construction: 2001, condition: good (used), MATTIAZZI panel profiling and bending plant MOD. 75/1000 Podsullfajpfx Agwsgu

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Pgedoigruyopfx Agwju

Condition: new, Siemens 1FT5064-0AF71-1-Z Motor SN: YFT834937501001 with ROD 320 encoder, unused, 100% functional, scope of delivery as per photos, Z see type plate Psdpfom Itgyox Agwsgu

Year of construction: 2024, condition: new, functionality: fully functional, The powerful fiber laser markers in the Y-Series are ideally suited for industrial part marking. They are used in almost all metal and plastic processing industries for precise and efficient direct marking of parts and products: from automotive construction through medical and security technology to electronics. All kinds of codes (QR codes, DMC / DataMatrix Codes, Barcodes), alphanumeric characters, logos and letterings are marked reliably and highly accurate with fiber lasers. The vision system which can be optionally integrated in the marking unit, features markings in zero-defect quality and process reliability through automatic optical verification and validation steps. The Marking Field Calibration as well as parameter sets for optimizing marking speed, quality and accuracy allow optimum adaptation to the respective application. Pgedpfxsfir S Ne Agwju

Condition: good (used), Year of construction: 2002, Technical Details : - Year - 2002 - Capacity - 20m2/h - max. width of mesh - 1000mm - Wire diameter range - 2mm - 5 mm Line includes : - Mechanical wire pay of - Crimping machine Pgedpokuy Sbsfx Agwsu - Weaving looms machine with hydraulick agregat

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 365 mm, turning diameter over bed slide: 570 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, controller model: NUM 1062, No minimum price - guaranteed sale to the highest bid! Condition: Mechanically very good, old tube monitor defective TECHNICAL DETAILS Turning length: 1,000 mm Spindle speed: 3 - 2,500 rpm Machining diameter: 570 mm Swing diameter (max.): 570 mm Turning diameter (max.): 365 mm Workpiece length max.: 1,000 mm Number of cross slides: 1 Spindle diameter: 62 mm Feed Z: 0 - 10,000 mm/min Podpfxowqgqkj Agwegu Feed X: 0 - 5,000 mm/min Tool holder: Chisel holder Quill mount: MK 5 MACHINE DETAILS Control: NUM 1062 Connected load: 35 kVA Connection voltage: 400 V Mains frequency: 50 Hz Overall height: 1,800 mm Total weight: 4,000 kg Space requirement length: 3,400 mm Space requirement width: 1,900 mm EQUIPMENT - 3-jaw chuck - Various soft jaws - Tailstock

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Podjwxahfjpfx Agwegu Tool stations: 6 + 6 Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Condition: used, Year of construction: 1996, Name: Used filter press Manufacturer: Netzsch Type: 1000 /110 Year built: 1996 Construction form: Side beam press Pgedjvta Naepfx Agwju Filter pressure: 15 bar Press content: approx. 2509 Liters Cycle: Closed Filter area: Approx. 163 m2 Plate size: 1000 x 1000 mm Number plates: 100 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9.347 x W 2.245 x H 2.435 mm Empty weight: 11.800 kg Technical doc.: Yes Message: It will be available from January 2025 Accessories: A switch cabinet, a control cabinet, a hydraulic system, a light curtain, a filter cloth washing system and drip trays Condition: Second hand Price: On demand

Condition: new, Siemens 1FT5066-0AF71-1-Z servo motor SN: YFWD13232301001 with ROD 320 encoder and IP67 housing, unused in opened original packaging, 100% functional, scope of delivery as per photos, Z see type plate Pgjdpsm Nx Ntsfx Agwou

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 0368, Main data Swing diameter: 280 mm Grinding length: 1,000 mm Longitudinal slide Table swivel range: ± 7° 30' Table speed: 0.05 – 7 mm/min Infeed Infeed path for rough plunge grinding: 1.5 mm/Ø Infeed path for fine plunge grinding: 0.15 mm/Ø Automatic rough infeed speed: 0.1 – 4 m/min Automatic fine infeed speed: 0.015 – 1 m/min Grinding spindle headstock Max. grinding wheel (D × W × d): 400 × 40 × 127 mm Max. grinding wheel speed: 2,560 rpm Grinding wheel diameter: 250 mm Pgedpfx Agoww Ig Hjweu Max. grinding wheel swivel range: ±45° Adjustment travel: 265 mm Tailstock Quill taper: MK4 Tailstock quill travel: 25 mm Workpiece headstock Workpiece spindle taper: MK4 Swivel range: ± 90° Max. number of steps: 12 MACHINE DETAILS Dimensions: approx. 2,100 x 2,000 x 1,500

Condition: used, Year of construction: 2002, functionality: fully functional, I WILL SELL NKT LINES FOR MICROCONFOLLOWING A WEINIG UNIRIP 310 EDGER Pgsdswmnpaepfx Agwsu MORE INFORMATION BY PHONE. POSSIBILITY OF SENDING A VIDEO OF THE MACHINE WORKING

Condition: used, Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, picking trolleys, mobile shelves, tray trolleys, embroidery trolleys Pjdpjrri S Defx Agwogu -Transport trolley: Commission trolley, floor trolley -Tiers: 9 borders arranged diagonally -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 1000/800/H1700 mm -Weight: 103 kg