Used Benford Hd 1000 for sale (10,086)

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system Iaodpewvgbgjfx Aa Eow - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote! Iedpfx Aaey Izauj Eoaw

Condition: excellent (used), Year of construction: 2018, operating hours: 12,714 h, functionality: fully functional, For sale is a wire belt blasting system from the renowned manufacturer Rösler, model RDGE 1000-4 HD. The system is in perfect condition and fully functional. A viewing under power is possible at any time after prior arrangement by telephone. If you are interested or have any further questions, please do not hesitate to contact us. Iedpfx Aaevmwrlo Eeaw

Condition: good (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, machine/vehicle number: V-1225, rotational speed (max.): 1,500 rpm, volume flow: 75,600 m³/h, pressing: 13,291 Pa, power: 350 kW (475.87 HP), Fan for sale. Iedpfsy S Rlnex Aa Eeaw Very few operating hours, as it was only used as a backup.

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma • Tube capacity • Max tube length: 8,000 mm • Min/Max tube diameter: 100 mm / 750 mm • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator • Model: ESAB iSeries300i Iodpfey Ephaex Aa Ejaw • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment • Flat cutting table with slats, 1,500 x 1,000 mm

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 210 bar, empty load weight: 175 kg, warranty duration: 6 months, temperature: 98 °C, KARCHER HDS 1000 BE PETROL HOT WATER WASHER Manufactured in 2021 Isdpsya Aziofx Aa Eoaw The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. NEW 12V 50Ah starter battery. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient HONDA GX390 petrol engine ensures stable operation even during prolonged use. With operating parameters of 210 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Pumping capacity (l/h): 450 - 900 Operating pressure (bar/MPa): 40 - 210 / 4 - 20 Max. water supply temperature (°C): 80 - 98 Fuel consumption (kg/h): 5.6 Engine type: GX 390 Engine manufacturer: HONDA Weight (kg): 175.7 Dimensions (L x W x H) (mm): 1100 x 750 x 785 EQUIPMENT: NEW 12V 50Ah STARTER BATTERY NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW 10m reinforced steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE HIGHEST FEATURES FEATURES: Open oil system - no operating time limits Highly readable and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Iaodpexbh Dqofx Aa Esw Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Iaodpfx Ajx Th N Hja Ejw Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Iaodpfx Asuk Niysa Ejw Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Iedoulaxbjpfx Aa Eeaw Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 1,000 kg, Column lifting rotating device 1 ton load capacity Protec turning device / positioner Syncrolift Double column, hand-held remote control wireless and manual Column adjustment can be moved twice Load capacity 1000 kg Minimum working height: 600 mm Maximum working height 1500 mm Speed 1 rpm Clamping plate diameter 500 mm Rotating movement 0.37 kW Iedpfxsvllfws Aa Esaw 2 to 10 ton load capacity possible on request

Condition: new, Year of construction: 2025, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Iaedsx Thvyopfx Aa Esw Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: new, load capacity: 1,000 kg, Column lift turning device 1000 kg load capacity, mobile with 2 pallet trucks Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of manufacture: 2024 Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm (adjustable at extra cost) Vertical adjustment: 900 mm Clamping plate diameter: 500 mm Rotary drive: 0.4 kW Lifting motor: 2 x 0.4 kW Various column lift turning devices available: Iaedpfjwulnpex Aa Ejw 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Iaodpfx Asx Th Rwea Esw Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Condition: reconditioned (used), functionality: fully functional, operating pressure: 210 bar, empty load weight: 62 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 10/21-4S PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. Iaodpfx Aaoy S Tcvo Eew A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 210 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 210 Pressure Maximum pressure (bar): 250 Connected power (kW): 8 Weight (kg): 62 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 10 Cleaning agent tank capacity (l): 6 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: new, functionality: fully functional, machine/vehicle number: 1.286-960.0, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, The HD 10/25-4 S Plus cold water high-pressure cleaner is ideal for ergonomic and user-friendly operation. With the Kärcher EASY!Force Advanced trigger gun, it can be operated comfortably without holding the gun. Pressure and water flow can be adjusted using the Servo Control regulator between the lance and trigger gun. The pressure reduction allows for quick response to sensitive surfaces – without changing the nozzle. In addition, the Vibrasoft rotor nozzle significantly reduces vibrations on the spray lance. Assistance systems and an LED status display simplify operation. Technical Specifications: Condition: NEW Catalog Number: 1.286-960.0 Current Type (Ph/V/Hz): 3 / 400 / 50 Flow Rate (l/h): 500-1000 Working Pressure (bar): 80 - 250 Maximum Pressure (bar): 280 Iodpfx Aasxpf Hxj Ejaw Inlet Temperature: max. 60°C Power Rating (kW): 8.8 Connection Cable (m): 5 Weight (with accessories) (kg): 70.3 Dimensions (L × W × H) (mm): 607 x 518 x 1063 Included: Handgun: EASY!Force Advanced + Softgrip Insert Hose: 10m DN8, 315 bar - Premium Quality Spray Lance: 1050 mm Power Nozzle Dirt Blaster Servo Control Features: 4-pole three-phase motor with air and water cooling 3-piston axial pump: with stainless steel pistons Pressure shut-off Integrated fine water filter Oil level sight glass Brass water inlet Design: - Compact upright design concept thanks to vertically mounted motor and pump unit - Small footprint and space-saving external dimensions. Easy to maneuver and transport. Maximum stability ensures the device remains stable. - Slow-running 4-pole motor with water and air cooling, robust pump with stainless steel pistons and brass cylinder head - Long service life with low maintenance costs. High performance with high efficiency. With suction function and water temperature up to 60°C. Advantages: - Ergonomic Vibrasoft dirt blaster, reduces vibrations by up to 30%. Reduces noise and sound levels. Enables effortless and extended work with the rotary nozzle. - Assistance systems and LED status display - Pressure and water flow are adjustable using the servo control regulator between the lance and gun.- EASY!Force Advanced for fatigue-free work without holding forces.

Condition: new, weight max. 1000 Kg Iasdpfjk Dvhdox Aa Ejw workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm Isdjvn U E Sepfx Aa Ejaw drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: used, Year of construction: 2025, operating hours: 400 h, functionality: fully functional, operating pressure: 1,000 bar, empty load weight: 3,500 kg, fuel: diesel, overall weight: 3,500 kg, HAMMELMANN AQUAJET 20 Iaodox Exmaepfx Aa Ejw 200 KW ENGINE 1000 BAR / 110 LITERS OR CONVERSION TO 2800 BAR / 40 LITERS YEAR 2024 Tel. 6 E-mail: m z ol m a r @ o p . p l

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations) Iajdpfxjzmgkgs Aa Eow

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Ijdpfx Aovlz Arja Eeaw Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system. Iaedpfxjzlad Ds Aa Eew

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 Iedpfey Tubpjx Aa Esaw -Drive: 2.2 kW -Speed: 2860 rpm -Dimensions: 375/335/H385 mm -Weight: 30.7 kg

Condition: good (used), servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR Iajdpfx Aevpffxoa Eow -Type: RH-8-3006-T-SP -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v Isdoyynd Ropfx Aa Esaw 9.000 RUNNING HOURS NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.