Used Sdj 1000 for sale (8,342)

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Ksdpfx Asyvqc Uohvjww

Condition: excellent (used), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity (°C/min) -65º to 71ºC: 6.8°C Heating capacity (°C/min) -65º to 180ºC: 5.6°C Heating capacity (°C/min) -40ºC to 85ºC: 6.5°C Cooling capacity (°C/min) 85ºC to -40ºC: 4.7°C Cooling capacity (°C/min) 71ºC to -65ºC: 3.7°C Cooling capacity (°C/min) 180ºC to -65ºC: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Important information for you as a buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Kwedoixtitopfx Ahvew Condition: used Scope of delivery: (See picture) (Subject to change and errors in the technical data and information!) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, TOP work table AT 1000 with beechwood worktop and flour trolley Kjdexp Uipspfx Ahveww

Condition: ready for operation (used), Alpa RTL 1000 Worklength with magnetic table: 1000 mm Grindingwidth: 635 mm Longitudinal travel X-axis (autom.): 1150 mm Cross-travel Y-axis (autom.): 560 mm Travel Z-axis (autom.): 620 mm Dimensions magnetic table: 1000 x 500 mm Max dia grindingstone: Ø 400 × 127 × 75 mm Kwedpfxeytyq Uj Ahvow

Condition: ready for operation (used), A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible. Kwsdjyvixzjpfx Ahvow

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, table load: 700 kg, overall weight: 12,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis WEMAS VZ 1000 vertical machining center was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 610 mm, and Z-axis travel of 660 mm. The machine includes a robust table size of 1300 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1000 machine we have for sale. Contact us for further details. • Axes: 3 linear axes (X/Y/Z); 4th axis available via rotary table — see Additional equipment • Electrical data: 35 kVA, 400 V, 3 + PE • Table size: 1300 × 600 mm • Tool changer: Swing-arm ATC, 20 tools Additional equipment • 4th-axis rotary table (mounted on the table) • Through-spindle coolant (CTS) • Tool measurement probe: Renishaw TS27R Kjdpfjyttutjx Ahveww • Chip conveyor Technical Specification Taper Size SK 40

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW Kedpfx Aouu Rr Dehvoww

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. • Selection unit: yes Kwsdpfoytqlcox Ahvow • Single platen: yes • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 80 / 58 A • Total rated current: 138 A • Total connected load: 75 kW • Condition note: small servo motor problem Additional equipment • Geiger handling (optional)

Condition: excellent (used), Stainless steel flow wrapper in almost new condition. Touchscreen model. Kwodpfstux N Hsx Ahvow

Condition: new, Year of construction: 2026, SELF-PROPELLED BITUMEN EMULSION SPRAYER BS-1000SP TM TICAB self-propelled Bitumen Emulsion Sprayer BS-1000-SP is the most powerfull mini bitumen emulsion sprayer among all TICAB mini sprayers. Spray bar 1,5m (7 nozzles) covers up to 2000 sq.m per hour. Tank 1000 L. Repair work in the shortest possible time both on small areas (household areas, alleys) and on the bigger areas. Self-propelled system fits any trailer. Car is needed just to move the BS-1000-SP sprayer to the construction side. It makes using the sprayer much easier and increases its maneuverability. Operate remotely using a joystick. Specifications: Gasoline engine – 16 hp; Productivity – 30 l/min; Spraying width – 1.7 m; System cleaning – 3-level, diesel fuel; Self-pumping function of the tank; Installation on a frame or on a trailer at the customer's request; Heating system of the emulsion tank; Tank – 1000 l; Kwodpfxsvpg Izs Ahvsw Possibility of connecting an extra compressor for spraying bar cleaning; Thermal sensor – mechanical; Burner – propane; Hand spraying rod; Self-propelled traction hydraulic wheel.

Condition: new, Year of construction: 2026, Bitumen Emulsion Sprayer BS-1000 Bitumen Emulsion Sprayer BS-1000 is designed for priming the surfaces prior to asphalt laying, asphalting adjacent areas, as well as for pouring seams and cracks with bitumen emulsion. Bitumen emulsion is supplied from a 1000 l tank, which is installed directly on the fixing platform. Heating system allows the bitumen emulsion to be sprayed in a cold time. It is easy to use. It has its own cleaning system. Made on a steel frame, or mounted on a trailer. SPECIFICATIONS: - Productivity – 36 l/min. Kwsdpfsvptnujx Ahvew - Spraying width - 2,2 m. - Cleaning System - 3-level, diesel fuel. - Self-pumping function of the tank. - Installation on a frame or on a trailer at the customer's request. - Heating system of the emulsion tank. - Tank 1000 l. - Possibility of connecting an extra compressor for spraying bar cleaning. - Thermal sensor - mechanical. - Hand spraying rod

Condition: excellent (used), Automatic pallet wrapper Kjdpoyu U Rxsfx Ahveww Film pre-stretch Inventory no. 3839 Manufacturer: Certis Model: Tablo 1000 * Year of manufacture: 2011 * Turntable positioning via Fix-Stop * Number of bottom and top wrap cycles * Turntable diameter: 1,650 mm * Maximum wrapping height approx. 2,150 mm * Net weight approx. 310 kg * Suitable for Euro pallets and block pallets!!! * Very good condition

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality - Proven GreCon technology - Suitable for continuous industrial production Kwodpfoyu Up Iox Ahvow - Compact and robust design - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Year of construction: 2023, condition: new, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Equipment designed for binary control (open/close) of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial number: 23012‑2129534 Year of manufacture: June 2023 Compliance: CE – Full nameplate present Nominal section (rectangular DN): 1000 × 500 mm Total weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial-grade sheet metal, peripheral flange Actuation type: Mechanical On/Off with installed actuator Blade type: Reinforced rectangular blade (central shaft) Closing method: Full shut-off (shut-off type) Main material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) Kwsdeyhxmzepfx Ahvow This damper is particularly suitable for installations requiring reliable on/off isolation, such as: - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems

Condition: not inspected (used), Year of construction: 2007, functionality: limited functionality, grinding length: 1,000 mm, grinding diameter: 400 mm, The machine was repaired by the manufacturer after a crash. Table and tailstock have been overhauled. The control system boots up and the machine is capable of grinding. Error: Dimensional accuracy not ensured, the wheel is pulled towards the workpiece during the grinding process. The machine can serve as a source for spare parts. Kodpfx Aoyu T N Tshvsww

Condition: used, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, battery voltage: 48 V, fork length: 1,000 mm, Empty weight: 2.848 kg Lifting capacity: 1.000 kg Maximum passing height: 210 cm Supply voltage: 380 V CE mark: yes General condition: average Technical condition: average Kwedpfxjyu T Naj Ahvew Visual appearance: average Please contact Bas Sindorf for more information

Year of construction: 2009, condition: ready for operation (used), A Köhler salt spray chamber for corrosion testing of materials and components is available. Test chamber volume: 1000l, temperature constancy: +/-1K, water pressure range: 2.5bar-5bar, internal dimensions X/Y/Z: 1250mm/950mm/760mm, machine dimensions X/Y/Z: approx. 2100mm/1400mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Kodjyu T Dkjpfx Ahvjww

Condition: excellent (used), IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB Ksdjytff Dspfx Ahvjww TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,200 kg, opening width: 280 mm, total width: 2,050 mm, total length: 1,000 mm, total height: 1,200 mm, cutting force: 100 t, cutting length (max.): 600 mm, Alligator Shear 100 Tons – 11 kW | Powerful Metal Shear for Recycling & Industry This robust alligator shear is the ideal solution for efficient metal cutting in recycling operations, workshops, or industrial environments. Featuring immense cutting force and a durable construction, this machine is designed for continuous operation under heavy loads. Powered by a high-performance 11 kW motor, the unit delivers an impressive cutting force of up to 100 tons (1000 kN). This allows for effortless and reliable processing of a wide range of materials such as steel, profiles, pipes, or scrap metal. A 600 mm long blade and a maximum opening of 280 mm enable convenient handling of even larger workpieces. With a cycle rate of 9–16 strokes per minute, this shear operates efficiently and ensures a high throughput. Kjdoyu S Egjpfx Ahveww The heavy-duty construction with a total weight of 3,200 kg guarantees maximum stability and long service life—even in demanding continuous operation. Technical specifications: • Power: 11 kW • Cutting force: 100 tons / 1000 kN • Max. pressure: 100 tons • System pressure: 16 MPa • Blade length: 600 mm • Max. opening: 280 mm • Stroke rate: 9–16 strokes/min • Weight: 3,200 kg • Dimensions: 2050 × 1000 × 1200 mm Highlights: • Extremely powerful metal shear (100 tons) • Ideal for scrap, steel, profiles & pipes • Large blade length for versatile applications • High throughput due to efficient stroke rate • Robust industrial design for long-lasting use This alligator shear is the perfect choice for anyone looking to cut metal reliably, powerfully, and efficiently.

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Kwedpfx Ajyr Tygohvsw Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 Kwodpfxjyr Rm Ro Ahvow - Feed roller diameter [mm]: 140 - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Empty weight: 5.000 kg Price: On request - Details: - └ Description: Currently not working, problem with 7th-spindle sensor - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 105364 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 2: - - Motor power [kW]: 11 - └ Spindle 3: - - Motor power [kW]: 11 - └ Spindle 4: - - Motor power [kW]: 18.5 - - Tool present: Yes - └ Spindle 5: - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 6: - - Motor power [kW]: 18.5 - - Tool present: Yes Kedpeyr Ntcjfx Ahvjww - Min. planing width [mm]: 15 - Max. planing width [mm]: 231 - Min. planing height [mm]: 3 - Max. planing height [mm]: 161 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 7.5 - Diameter extraction nozzle [mm]: 160 - Options: Powerlock, Powered rollers in table, Automatic feeding system - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - Feeding system: - └ Brand: Weinig - └ Type: E-1/L - └ Max. feed length [mm]: 5000 - └ Max. feed width [mm]: 230.5 - Voltage [V]: 400 - Current consumption [A]: 242 - Fuse [A]: 315 - Power [kW]: 112.0 - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Kwedeyi Hpcjpfx Ahvew Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Note: with test book -with chain hoist: Vetter type SIE 6F, year of manufacture 1998 -Lifting speed: 5.0/1.25 m/min -Drive system: yes -Swivel drive: yes -Projection: 7020 mm -Total height: 3870 mm -Hook height: 2960 mm -Swivel range: 360° Ksdpfx Ahjx R U Azsvjww -Transport dimensions: 1460/7570/H2280 mm -Empty weight: 1250 kg

Condition: used, machine/vehicle number: 42412110103163, mileage: 223,023 km, first registration: 03/2026, Description Make: Mercedes-Benz Type: 424 - Unimog 1000 First registration: 22 August 1983 Registration no.: BF - ES 107 Mileage according to odometer: 223,023 km (as of 06/11/2025) Inspection valid until: October 2025 (due) Vehicle identification number: 42412110103163 Power: 70 kW (95 hp) Kwodpeyux Stjfx Ahvow Category: Vehicles Displacement: 5,638 cm³ Defects: - Various damages - Construction site vehicle