Used Sps for sale (1,416)

Condition: excellent (used), Year of construction: 2010, operating hours: 6,191 h, functionality: fully functional, We have an SPS Stop Cylinder B1 machine for sale, year of manufacture 2010, placed into production in 2018. From 2010 to 2018, the machine served as a demo unit in a showroom and ran only empty cycles without printing, which is why it has a higher number of empty cycles – 3,366,000, compared to 1,818,912 printing cycles. The machine consists of a stop cylinder, UV tunnel, and stacker. During a service inspection last year, the SPS technician rated its condition as the best he has ever seen on a used machine in his career. The machine will be available in January 2026. Hjdpfx Afoxmuu Hjisfn

Condition: ready for operation (used), Year of construction: 2004, SPS CP2 SpotUV 72cm*102cm + UV SPS ClassicJet M2 (2H/1C UVi) / 2 x heating stations UV cooler ST2 stacker delivery Also included are extra brand-new lamps, extra strap and about 80 metal frames. Max paper size : 720 x 1020 mm Min paper size : 320 x 450 mm Screen size : 1140 x 1280 mm Speed : 3300/h Dimensions : 4090 x 2350 x 1580 mm Hfjdpjwmmhzofx Afien Weight : 4200 kg Air : 6 bars Power supply : 3 x 400V N PE 50/60 Hz – 13.5 Kw

Condition: used, functionality: unexamined, machine/vehicle number: KT 3881H / A2110, input voltage: 230 V, SPS Electronic KT 3881H multifunction insulation tester on frame Manufacturer: SPS Electronic Model: KT 3881H / A2110 Voltage: 230V (50Hz) Hfjdpfexlgu Aox Afisn On mobile frame with extra cables

Condition: like new (used), Year of construction: 2007, SPS screen printing stacker model ST2, completely overhauled. Format: 750x1050mm Year: 2007 Hfsdpfxjxk T E Sj Afisn Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the production of UV (electronic) or hot air tunnels.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 Hfodpswtc Hasfx Afisn TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: good (used), Year of construction: 2001, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Multistar G2/C - Machine type: Screen printing machine (complete system) - Year of manufacture: 2001 - Equipment: • SPS feeder unit • SPS dryer, model TS-M2, year 2001 • SPS stacking/declaration unit, model Autostack ASR 61+G2, year 2001 Hfsdpfx Afjxby S Hjien • Steel platform and chequer plate on pallets • Control cabinets - Fields of application: industrial screen printing, packaging, labels, special print jobs

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Automatic Stacker: SPS AUTOSTACK 2 Hfsdpfxjw Eb Uao Afion

Condition: good (used), Year of construction: 2004, functionality: fully functional, SPS VITESSA CLASSIC G2 COATING MACHINE TYPE : CLASSIC G2 SIZE : 74 x 104 cm DETAILS Automatic Spot Coating Machine, Max Sheet Size 74 X 104cm, Hsdpfovy Haxex Afijfn Min sheet 32 x 45cm, Automatic Pile Suction Feeder Very Good Condition Immediately Available

Condition: good (used), Year of construction: 1997, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: screen printing machine - Year of manufacture: 1997 - Equipment: • Mabeg feeder, model MS Hsdpfx Ajxby Smjfisfn • SPS dryer, type UV Top 1200, year 1993 • SPS Rehmus stacking unit, type Autostack S-02, year 1993 • Steel platform and tread plate on pallets • Control cabinet • Screen printing frames - Area of application: industrial screen printing, packaging, labels, special applications

Condition: used, Year of construction: 2001, • Manufacturer: SPS • Model: Vitessa Star G2 • Year of manufacture: 2001 • Machine no.: 10001161 • Printing process: Automatic cylinder screen printing press with stop cylinder principle • Max. sheet size: approx. 790 x 1040 mm • Min. sheet size: approx. 315 x 440 mm • Material thickness: 0.1 – 0.8 mm • Printing speed: up to 4,000 sheets/hour • Features: Hfsdpfxjwv D Udo Afijn - Fast screen changeover by pneumatic clamping - Central 3-point fine adjustment - Robust machine base for industrial printing production // Equipment components • 1x feeder unit – Mabeg PAL 3 (year 2001) • 1x dryer – Svecia SHJD (year 1985) • 1x stacker – Svecia SAP-A (year 1985) • 1x UV curing unit with control module

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 350-14, saw band length: 3,660 mm, saw band width: 27 mm, feed length X-axis: 490 mm, type of input current: AC, cutting width (max.): 300 mm, table height: 715 mm, cutting height (max.): 150 mm, space requirement width: 2,000 mm, space requirement length: 1,600 mm, space requirement height: 1,800 mm, empty load weight: 1,175 kg, remaining piece length: 150 mm, The WOS 280X300 model is an automatic bandsaw. Thanks to hydraulic hold-down devices, the machine is capable of performing bundle cuts. Linear guides ensure precise cuts. After the length of material to be cut and the desired quantity are entered via the PLC control panel, the machine automatically adjusts the cutting length using an encoder and cuts the specified quantity. The feed clamping devices automatically transport the material to the pre-set length. Up to 20 different cutting sizes can be programmed on the screen. The control panel can store up to 50 different job lists, which can be accessed at any time. Ideally suited for bundle cutting. PLC control panel for: automatic operation manual cuts Frequency inverter drive Adjustable descent speed Adjustable vise pressure (manometer) Single-sided movable vises with fixed jaw Hydraulic blade tensioning Rotating chip brush Chip conveyor 2 saw blade guides with carbide inserts 1.5 m roller table with lateral guide rollers Monitoring and automatic stop in case of: open covers Hfjdpfsxldngox Afijn saw blade breakage or blockage low blade tension

Condition: used, mileage: 89,800 km, power: 113 kW (153.64 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 03/1999, number of seats: 3, Equipment: ABS, crane, MAN L2000? Klaas K28/34? 35 meter radius? 1500 kg? Hydraulic Klaas work basket? Radio remote control, first owner, fully serviced crane with manufacturer's history, radio remote control, 4890 operating hours, completely new tires, self-propelled work machine, DA53 mobile crane, toll-free, low-emission zone-free, green sticker, new TÜV & UVV (German Road Safety Inspection Association). Optional accessories: rubble skips, tile clamps, roof trestles, suspended work basket. Despite the greatest care, errors in this advertisement cannot be ruled out. We reserve the right to make errors and to resell the crane prior to sale. Hfodpsw U Twdjfx Afisn MAN L2000, Klaas K28/34, 35 meter reach, 1500 kg, radio remote control, 125 kW 170 HP, first owner, completely overhauled crane, serviced crane with manufacturer's history, radio remote control, completely new tires, self-propelled work machine, DA53 mobile crane, toll-free, low-emission zone-free, green sticker, new TÜV and UVV (German Road Safety Inspection Association). Optional accessories: work basket, debris skips, tile clamps, roof trestles. Despite the greatest care, errors in this listing cannot be ruled out. We reserve the right to make errors and to resell the vehicle prior to sale.

Condition: good (used), Year of construction: 2008, Koch central controler SPS 16 Hfedpow Hyuujfx Afien year 2008 price: €2,750.00 contact: Mr. Rainer Eckerle

Condition: used, machine/vehicle number: 20048, Spindelpresse - Spindle Press Krause SP-SPressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Hfodpjh Ayh Ssfx Afijn Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm Hfodpevtgn Nofx Afijn bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, Spindelpresse - Spindle Press Dietz Listing SP-SPressfläche / Pressing Size max. 450 x 550mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video Hfedpoh Ayh Ijfx Afijn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 20048, Spindelpresse - Spindle Press Krause SP-SPressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hjdpfsh Ayiaox Afiofn On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2018, condition: used, with mesh safety enclosure, welded mesh fence, 1 sliding door for loading, 14 storage positions made of steel frame (blue), mobile loading trolley, IPSEN loading and unloading system, year of manufacture: 2018, serial number: 30.5185-60, 2 hinged doors, IPSEN hardening furnace DL(M)-5-E, year of manufacture: 2018, serial number: 30.5185-50, min./max. working temperature: 150/450°C, connection values: 49 kVA/38 kW/400 V/50 Hz, IPSEN autoclave "Electromagnetic Field Emission Category 2 (EN12198)", Ø approx. 180x400 cm, type: RUHT-524 (FV)AvaC(N), year of manufacture: 2018, serial number: 30.5185-10, min./max. working temperature: 150/1,320°C, 1 cooling unit KKT cBoxX, no.: 909120-00575, year of manufacture: 2018, water softening unit, pressure vessel MASCHINEN- UND BEHÄLTERBAU MB170512-3.14300L, volume: 14,300 l, year of manufacture: 2018 Hfjdpfoxnahzjx Afisn

Condition: ready for operation (used), functionality: fully functional, overall weight: 150 kg, power: 3 kW (4.08 HP), tank capacity: 150 l, negative pressure: 240 Pa, Ruwac SPS 250 - Separation of chips and liquids - Suction of large quantities with a high liquid content - Available with three-phase and single-phase drive - Suitable for machine cleaning Hedpfx Asxn S Rhjfiefn - Suction of heavy chips Technical data: Housing: Sheet steel Motor power: 3.6 kW Voltage: 230 Volt Container volume: 150 liters Suction connection: 50/70 mm

Condition: used, Siemens PLC SCALANCE X212-2 6GK5212-2BB00-2AA3 RA2287 Manufacturer: Siemens Model: 6GK5212-2BB00-2AA3 Condition: Used Transmission rate: 10 Mbit/s, 100 Mbit/s Interfaces Number of electrical connections for network components or end devices: 12 Hfedpfstp Tvzox Afijn Number of 10/100 Mbit/s RJ45 ports / integrated with retaining collar: 12 Number of 100 Mbit/s ST(BFOC) ports for multimode: 2 Operating voltage / of the signaling contacts at DC / nominal value: 24 V Operating current / of the signaling contacts at DC / maximum: 0.1 A Maximum current drawn: 0.33 A Design of the electrical connection for power supply: 4-pole terminal block Type of electrical connection for signaling contact: 2-pole terminal block Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg

Condition: used, Year of construction: 2007, functionality: fully functional, Machine type: Surface grinding machine Brand: STÖCKEL Model: FX60/30 SPS Year of manufacture: 2007 Location: In Germany Fully functional and still powered Includes extraction unit and water tank Hfodpfxow U Ry Ae Afijn

Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm speed down 380 mm/s speed up 185 mm/s working speed 28 mm/s oil volume 450 l power requirement 15,0 kW weight 9,5 t dimensions (WxDxH) 2,3 x 1,9 x 3,6 m hydraulic fast-stroke trimming press for cast parts with oilhydraulic drive, light guard (Sick), hydraulic blank holder / ejector in ram (7,5 t / 150 mm), control device for hydraulic blank holder, pneumatic ram interlocking table surface 1340 x 685 mm or 910 x 1085 mm Hodpfovuk E Iex Afisfn ram surface 1235 x 685 mm or 910 x 1000 mm as is where is, WITHOUT putting into operation

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details workpiece diameter 500 mm workpiece weight 300 kg workpiece height 400 mm total power requirement 18 kW dimensions of the machine ca. 2500 x 2700 x 2800 mm Additional information ELB high-precision rotary table surface grinding machine Hsdpfx Afexfr Tkeisfn Machine comes from a plant closure. Equipment: Magnetic rotary table diameter 600 mm Coolant system with paper belt filter With NK grinding program The NK grinding program enables the quick and optimal processing of workpieces with different processing dimensions. Depending on the workpiece to be processed, you can choose between a face and plunge grinding cycle. An attached measuring system with 0.001 measuring accuracy records the grinding wheel feed and controls the automatic grinding cycle with its subsequent electronics. This consists of different adjustable feed sizes of the grinding wheel. Deactivation of the feed when the target size of the workpiece is reached, adjustable spark-out time, return of the wheel and the machine table to the starting position. The dressing amount of the grinding wheel is automatically compensated and shown in the digital display of the Y-axis. The wheel wear caused by grinding is compensated during dressing. Roughing amounts 0.002-0.03 mm Finishing amounts 0.001-0.015 mm Sparking strokes Z-axis 0-15 mm Lifting amount optionally 0-2.8 mm or back to starting position Electronic handwheel switchable for B-Y-Z axis Machine cover with manually operated sliding door for loading and unloading Technical data: Grinding diameter 500 mm Grinding height 400 mm Table load 300 kg Rotary table speed 20-80 rpm. Y-axis vertical adjustment of the grinding wheel Feed max. 300 mm/min. Displacement measuring system incremental rotary encoder, resolution 0.001 mm Z-axis transverse adjustment of the grinding wheel Automatic transverse travel max. 330 mm Transverse feed 4-1500 mm/min. adjustable Displacement measuring system incremental rotary encoder, resolution 0.001 mm Grinding spindle head Grinding spindle drive 10 kW Grinding spindle speed adjustable via frequency controller Grinding spindle cone 60 mm Grinding wheel 400 x 100 x 127 mm Control cabinet Dimensions L1600 x H2200 x D500 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device Hfsdpfx Afowrmcpjien - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 1999, condition: ready for operation (used), This ELB Perfekt 6 SPS surface grinding machine was manufactured in 1999. It features a magnetic plate measuring 600 x 400 mm, an automatic peeling device, automatic feed, and a belt filter system. It operates at a frequency of 50 Hz with a power supply of 12 Kw. Contact us for more information. Hfedpfsw Saygex Afisn Application Types Grinding