Used Sdj 1000 for sale (11,902)

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Parts shown by hand not come. Pgodpfxoxbqnxe Agwju

Condition: used, Year of construction: 2008, operating hours: 3,594 h, fuel type: diesel, Empty weight: 15.130 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Serial number: 1200021044 Front tyres / undercarriage remaining: 40 Pgjdpfjwimavsx Agwsu Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Pgsdpfx Agsxdbxyewju Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition Psdpsvzxpuofx Agwegu

Year of construction: 1975, condition: ready for operation (used), machine/vehicle number: M-27 738, Center hight: 165 mm Pgedpfx Agod Rv Rbjwou Center width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Condition: good (used), Year of construction: 1999, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: Switzerland Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° to (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper: MT5 Reducing sleeve: MT5/MT4 Short external taper fitting: DIN 55026 / Size 5 Pgjdpfx Aew T Tb Hegweu Permissible torque: 160 Nm Guaranteed roundness for chuck work Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper fitting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Grinding wheel data (max. speed) Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR Grinding Head Power: 9.2 kW / 12.5 HP Wheel mounting, left max.: Ø 500 x 80 mm Right, additional max.: Ø 400 x 63 mm Internal grinding device: spindle HJN 828 Lower table (Z axis) Distance between centers: 1000 mm Max. travel: 1150 mm Max. speed: 15 m/min Max. resolution: 0.1 µm Upper table Distance between centers: 1000 mm / swivel 0° to 9° Grinding carriage (X axis) Max. travel: 320 mm Max. speed: 7.5 m/min Max. resolution: 0.1 µm Pneumatics Min. connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max. connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Unless otherwise stated, technical data is provided without engagement and may be subject to errors or omissions.

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Workbench: solid design, height adjustable -Width: 2000mm -Depth: 1000mm -Height: 880 mm, adjustable see photos -Table top: wood, thickness 25 mm Pjdpfxsrxgw Ro Agwjgu -Quantity: 7 pieces -Price per piece -Weight: 66 kg

Condition: excellent (used), Riggs depositor mobile on wheels. rise and fall depositing head Podpfxoxbugro Agwogu

Year of construction: 1997, condition: ready for operation (used), Main Drive Number of axis 4 Additional Equipment Belt filter system Podpfsw Spr Esx Agwjgu This 4-axis KELLENBERGER Kel-Varia UR 175/1000 was manufactured in 1997. It features an internal grinding device with a tiltable B-axis and a C-axis for out-of-round grinding, complemented by a belt filter system. Consider the opportunity to buy this KELLENBERGER Kel-Varia UR 175/1000 cylindrical grinding machine. Contact us for more information. Application Types Grinding

Condition: good (used), Type FEr LD 180/600/1000 Pjdpeuhtmijfx Agwogu 100% operational, automatic rotation

Year of construction: 1981, condition: used, machine/vehicle number: 23066, temperature: 0 to +120°C usable space: width 1000 mm Pedpfxe Dqz Ro Agwegu depth 950 mm height 800 mm electrical connection: 380 V, 9,5 kW space needed: 1730 x 2330 x 1980 mm high weight approx. 1000 kg

Condition: new, Year of construction: 2019, machine/vehicle number: 3813, overall weight: 600 kg, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, workpiece diameter (max.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Pgjdpow Evkiefx Agweu Without broaching tools (broaches) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal Broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External Broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 units, 14 mm wide, parallel/perpendicular to the mounting surface of the tool slide Accessories/Special Equipment: Coolant system Broaching tool safety device Machine cover for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LxWxH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Y/Δ 50 Hz Connected load: 12 kVA Max. fuse: 25 A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching Tool Holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Please submit inquiries only via email. All information is provided to the best of our knowledge. Subject to errors. This offer is directed exclusively at businesses as defined by § 14 BGB. Sale is made without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller's obligations or for any injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the headings "Imprint", "General Terms and Conditions", and "Data Protection".

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: drawer cabinet, sturdy design - Drawers: 2 drawers / 3 pull-outs, division/height see photos -lockable: without lock Psdpfxew Skrye Agwjgu -Dimensions: W 1000/520/H 1900 mm -Weight: 91 kg

Condition: excellent (used), Grinding machine with swiveling tables, quiet oreration, robust Pedswal Efjpfx Agwsgu

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Pedpoign Efefx Agwjgu

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, center height: 175 mm, workpiece weight (max.): 180 kg, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, total length: 1,150 mm, grinding diameter: 349 mm, The machine is in working and usable condition in our workplace. There are 2 outer diameter and 2 inner grinding machines, it has a C axis. Pgodpfev Uxrijx Agwsu

Year of construction: 1965, condition: good (used), machine/vehicle number: 189.746, height of centers: 315 mm center distance: 1000 mm max. circulation-Ø over bed: 630 mm spindle boring: 74 mm spindle retainer: Gr. 8 retainer taper tailstock: 5 MK spindle speed: 7 - 710 rpm Podpfx Asi D D Nqsgwsgu forwarding feed: längs/plan 0,063-4/0,030-2 mm/U thread pitch: 1 - 14 mm electrical connection: 380 V kW space needed: 2750 x 1250 x 1380 mm weight: ca. 4200 kg

Condition: like new (used), “Herbold 600/1000 – Granulator / Shredder” for Sale Also many other manufacturers like: Pallmann / Lindner. Pgjdpjggfkbjfx Agwsu Find our complete stock on our website. Manufacturer: Herbold Type: 600/1000 Electrical Motor: 55 kW Included

Condition: good (used), Clamping plate, plate field, welding table, welding table, plate boring machine, surface plate, -with: holes -Width: 1000 mm Pgsdpeckk T Tofx Agweu -Length: 1000 mm -External height: 150 mm, panel thickness 100 mm -Number: 7x plates available -Price: per piece -Weight: 720 kg/piece

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Pgsdpfxowi Tdbo Agwsu Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm table size: 0/ 700 mm Location: In our warehouse

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Podpfx Agovxvgrswsgu

Condition: used, mileage: 43,875 km, Year of construction: 1995, Year of manufacture: 1995 Crane: Yes Pgodpfx Agswhqq Njwou Price: On request

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly Pgedpjw H Dgnjfx Agwou - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 1988, condition: ready for operation (used), Center height: 420mm, turning length: 600mm, orbital diameter over bed/face slide/in the offset: 900mm/1150mm/800mm, max. workpiece weight: 2500kg, spindle diameter in front bearing: 203mm, face plate diameter: 800mm, max. torque: 8000Nm, spindle bore: 100mm, max. chuck diameter: 1150mm. Bed slide longitudinal stroke: 600mm, face slide face stroke: 600mm, feed X/Z: 5m/min, speed: 710rpm. Machine weight: approx. 15000kg, control: Siemens Sinumerik System 3, repairs carried out: Cross slide (2022), guideways/wedge power, control components, main spindle motor, wiper (annually), V-belts and ball screws. Including dry casting machining (without cooling lubricant system), hydraulic unit, automatic door and chip conveyor. Documentation available. On-site inspection is possible. Pgodpfx Aswa A Tyjgwju

Condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle diameter: 120mm, speed: 3050rpm, drive power: 12kW, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Pgjdsvnd Tfepfx Agweu