Used Scraper for sale (695)

Condition: ready for operation (used), Year of construction: 2009, This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information. • Configuration/Features: Pedpfxoychdus Ahvspp • Joining milling • Gluing unit for EVA hot melt adhesive • Pressure zone • Cutting unit • Copy milling • Scrapers • Buffing unit Additional equipment • Workpiece returning system: LIGMATECH

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements Psdpfjx D Ix Tox Ahvspp • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 1998, total height: 4,900 mm, overall weight: 51,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Additional equipment • Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec • Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW • Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm Pjdpfxjx D Hcwo Ahvjpp Machine Benefits Technical Machine Benefits • Traverse path: x (table): 5200 mm/ y (slide): 3400 mm /z (spindle): 1250 mm • Traverse path: x (table): 5200 mm y (slide): 3400 mm /z (spindle): 1250 mm • Max. Feed force (x, y, z): 15 kn • Clamping surface: 2000 x 5000 mm / max. Table load: 100 kn / width / spacing of table grooves: 22 / 160 mm / passage width: 2400 mm / distance between spindle nose and table surface: 500 to 1750 mm • Spindle speeds: 10 to 5000 rpm / max. Power of the spindle motor: 37/46 kw / max. Spindle torque: 1000/1250 nm / spindle head for tool shank: sk 50 • Control type: microprocessor control siemens sinumerik 840d / screen: colour screen 10. 4 inch tft display / number of axes: 3 (x, y, z) • Control system: integrated with various functionalities including spindle orientation, interpolation, and an electronic handwheel • Programming and data transfer: includes comprehensive programming capabilities and data transfer options via the universal interface v24/rs-232 • Accessories: multiple accessories and additional device functionalities included, focusing on enhanced efficiency and safety Dimensions Machine Depth 10500 mm

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm Podsx U U Dtepfx Ahvjpp 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment Psdpfx Ahoyailzovjpp • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,654 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D SL, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3s DMG MORI 635V vertical machining centre was manufactured in 2013. It features travels of 635 mm in the X-axis, 510 mm in the Y-axis, and 460 mm in the Z-axis, with a rapid traverse of 30 m/min. The spindle speed ranges from 20 to 12,000 rpm, and it includes a 20-station tool changer. Consider the opportunity to buy this DMG MORI 635V vertical machining centre. Contact us for further details. • Rapid traverse: 30 m/min • Tool clamping: per DIN 69872 • Tool changer: 20-station SK40 (disc-type magazine with double gripper) • Table dimensions: 560 × 790 mm • PROGRESSline & Planonlight: Display of production time and remaining number of parts • DMG Netservice: Client installation on external PC • Options included: • Extended tool magazine: 30 stations (chain-type with pockets and double gripper) • Measuring system: Direct displacement measuring system for X, Y, Z axes with pressurization • Hours: • Power-on: 21,788 h • Spindle: 8,654 h Additional equipment • Renishaw probe kit: • OMP40-2 measuring probe (optical transmission) • OTS wireless tool setting probe • OMI-2T optical transmission module • Chip disposal package: Psdpfx Ahoyka Insvepp • Scraper-type chip conveyor (discharge height: 950 mm) • 185-litre tank • Cleaning spray gun • 4-colour signal lamp • Control option: Electronic handwheel • Electrical: 20 kVA transformer • Tooling: Sandvik SK40 tooling kit Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to buy this CHIRON DZ 18 W vertical machining center. Contact us for more information. Machine Benefits Ppodpfox D Nmxox Ahvsp Technical Machine Benefits • Travel speed (x-y-z): 75 m/min • Spindle distance 400 mm Extra Information NC rotary table, type ATU 200, installed in the IWW/ Rotary feedthrough for IWW/ Axes on the work area/ Double-spindle headstock/ HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/ Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/ VS drive X-Y-Z 75-75-75 m/min/ Automatic central grease lubrication/ Sinumerik 840D solution line, 10.4" color screen/ Control system/ Control interface/ RemoteLine SIE/MTX/ Maintenance management on screen/ for machining tilted surfaces, SIEMENS/ Operating hour and workpiece counter on screen/ Control cabinet cooler as door-mounted unit/ Signal light for 3 signals/ Fluid tower in open design/ Oil-free maintenance unit/ Cooling unit/ A u t t t e l l e l e m e n t e/ Chip conveyor scraper belt 1050 mm, rear/08, left/15, 18, 200 l/ Coolant system KF400-FKA900/900 l, 70 bar/ Bridge for cables and hoses/ Machine preparation for internal flushing/ Flushing of fixtures in the machining station/ 1 flushing gun outside the splash guard/ Work area flushing/ Additional equipment for extraction/extinguishing -/ Additional equipment for pneumatics/hydraulics -/ 1860 workpiece support control, coarse/ Hydraulic connection for 200 bar, single-acting/ Hydraulic connection for 200 bar, double-acting/ Regulated, lubricated air purge connection/ Hydraulic unit extension/ Additional equipment for measuring/tool breakage detection -/ RLP40Q measuring probe/ Whisker switch for tool breakage detection/ Additional equipment for machine operation -/ Automatic loading door Open/Close/ Walk Switch/ Additional Equipment: NC Control -/ M Function Package/ Variable Clamping Logic - Siemens/ Powersave/ Siemens Tool Management/ Comfort Cycle Fixture Flushing/ Revolutional Feed/ Loader Interface with Profinet/ Direct Door Detection in 'Open' Position/ Commissioning and Training/ Power Supply / Compressed Air 6 bar / Ambient Temperature 15°-40° C

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Podpfoyrhyujx Ahvjpp Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Psdpfxeu Ekbnj Ahvspp Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro Pedpfolikydjx Ahvepp EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Ppodpfx Ahoifnxxsvsp Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm Pjdoyrfh Nepfx Ahvjpp With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: used, Year of construction: 2024, Engine: Kubota D1703-DI with 18.5 kW, Emission Stage V Equipment: - Foldable ROPS - Sprinkler timer - Comfort seat, laterally adjustable - Mechanical offset - Drive lever forward/reverse, dual - Two selectable vibration levels - Selectable vibration front / rear / both - Spring-loaded scraper - Work lights (engine hood + 1x water tank) - Reverse alarm - Beacon (rotating warning light) - Central lifting point - Integrated lashing points - CE marking Options for CC1100VI / CC1200VI: - Work lights on ROPS (+2) - Road lights (replace engine hood work lights) - Work light on water tank (+1) - Lockable water tank cap - Rearview mirror - Bottle holder - Edge pressing device front right - Cutting wheel - First aid kit - 50-hour service kit - Dyn@Link telematics system Additional notes: - Trade-in and purchase of vehicles and machinery possible. - Sales price excludes transport - No liability for printing & typographical errors. - Errors, changes, and interim sale excepted. Ppodpfjv R Ur Rjx Ahvep - Offer non-binding. - Photos may differ. - The price applies to the current condition. - All information without guarantee. Further information: Type: Tandem roller Combustion engine output: 25 HP (18 kW)

Condition: good (used), Year of construction: 1997, Bargain price as the unit must be removed by the end of March. Large stationary filter system with a footprint of 4 x 2 m, divisible for transport. Total height is 6.54 m. Filter area of 300 m², 200 filter bags each 3 m in length. With scraper bottom discharge. With rotary valve. With return air duct. Additional equipment available. Price is for the undismantled unit ex location, but dismantling can be arranged at extra cost. Pjdpfx Ahjyun Ecsvspp

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Ppsdpfxsyq T Ino Ahvop Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Pedpfx Ahek Eai Uevjpp Weight: 545 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Psdpfjwv Uq Aox Ahvopp Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: used, consisting of: Contents: 2 x 500L Cooking-Stirring vessel stirring system with scrapers Max.4 bar steam pressure Yoc 2010 incl. control box Ppedpfjyqxuysx Ahvsp Process vessel 1: motor gearbox agitator 9-2020 Process vessel 2: motor gearbox agitator 16-02-2021 1 x Lobe Pump Jabsco Incl. 2 steam control valves. RTK Platforms in stainless steel

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Ppodpfxol D T D Te Ahvsp Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Year of construction: 2024, condition: like new (used), functionality: fully functional, Cream cooker "Creamco" with 80 litre bowl, demonstration model (year of manufacture 2024) with warranty, almost as good as new, only used for demonstration purposes, for puddings, batters, creams, fillings, cooked and boiled items and much more, with multi-walled stainless steel container, easy (tool-free) removal of stirring tool including plastic scrapers, digital thermostat and timer. Mobile machine, made entirely of stainless steel, with triple wall for optimum heat insulation and even heat distribution, including side and bottom scrapers. Includes removable lid with separately closable filling opening. Also perfect for making or preparing sensitive products such as choux pastry, baking cream, chocolate, fondant, fruit jam, coatings, fillings, and similar products that require even heating and mixing/stirring. There are 2 stirring speeds to choose from, as well as stirring without heating, e.g. for pre-mixing ingredients or cooling. Manual or automatic operation via digital thermostat and timer. The kettle can be easily tilted using a crank handle to remove the product, even by more than 90 degrees, making cleaning relatively easy. AVAILABLE NOW! Technical data: Capacity: 80 litres, maximum filling quantity approx. 50 litres, recommended minimum filling quantity: approx. 7 - 10 litres, max. temperature: 150°C, thermal oil volume: 19.5 litres, heating power: 9 kW, agitator motor power: 0.6 kW / 0.8 kW (1st / 2nd speed), connection values: 400 V - 3Ph - 50Hz, approx. 10 kW, 32A CEE plug Pjdpeyugb Nofx Ahvjpp Dimensions: approx. 96 x 74 x 165 cm (W x D x H), filling height: approx. 127 cm, weight: approx. 160 kg

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz Pjdsypm Hhopfx Ahvspp CE

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Pjdeyt I Uhepfx Ahvspp Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 053-497, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Machining Center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (Special Machine) Year of manufacture: 2005 Serial number: 053-497 CNC special machining center of type HPC FLEX-V100 from Werkzeugmaschinenfabrik Vogtland. The system is designed as a single-spindle machining module featuring both horizontal and vertical machining capabilities, and is equipped with an automatic pallet changer. It was specifically developed for processing rolling bearing cages. Ppjdpfx Ajyt I I Uehvop The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing for various machining positions and indexing angles. Using this 2-axis combination, a pallet with clamping fixture is swiveled from the loading position to the machining position. Loading is performed by an automatic pallet changer with a separate pallet infeed station. Direct loading within the machining area is not structurally provided. The system comes with extensive peripherals, including a coolant system with high-pressure unit, chip conveyor, hydraulic power unit, recooling system, centralized lubrication, as well as oil and emulsion mist extraction. The machine is controlled via Siemens SINUMERIK 840D. Used industrial special machine from a production environment. The system is fully assembled and equipped with comprehensive peripherals. Cosmetically in line with age and previous use, showing the usual wear in the working area. Inspection of the machine possible by appointment. Dismantling, loading, and transport to be carried out by the buyer. Machine Specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machining performance: approx. 1 workpiece/hour (depending on type) Machining Details • Workpieces: various rolling bearing cages • Material: CuZn40Pb2 • Operations: drilling, tapping, milling, facing, brushing Workpiece Clamping • Manufacturer: RAKO GmbH • Type: 12-jaw chuck • Operation: manual with power tool • Pallet size: 1250 × 1250 mm Controls and Drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Electrical Data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic System • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 • Tank capacity: 90 l • Maximum pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air requirement: approx. 300 m³/h Centralized Lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication cycle: every 10 min • Tank volume: 6 l Coolant System • Manufacturer: MANN + HUMMEL • Filtration unit: K90 L T63-PF750D-T-ND-SSP • Flow rate: 500 l/min at 4.4 bar (10 µm filter) High-Pressure Unit • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Flow rate: 50 l/min • Pump: ALLWEILER Chip Removal • Scraper belt conveyor with pump unit • Conveyor capacity: 550 l/min at 1.3 bar Extraction • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Recooling Unit • Manufacturer: BKW GmbH • Type: WRK30-2KK2P • Power: 8 kW Pallet Changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Type: F.M. 2667-0

Condition: good (used), Koruma DISHO-100/45 homogenizer. Capacity: 45 L Homogenizer: Ø100 mm – 0-5000 rpm Motor: 5.5 kW Jacket pressure: 6 bar Max temperature: 180 °C Material: Stainless steel Ppsdeyt Izhopfx Ahvjp Anchor agitator with scraper Vacuum capable Total dimensions - L:160cm x W:105cm x H:160cm.

Condition: excellent (used), Robland KM 550 Edge Bander Pedpfx Aoyt Hu Hohvepp Glue application with roller Pneumatic pre-cut guillotine Pressure rollers Final trimming saws Top and bottom milling unit R1 – R2 Flat scraper Machine length with table: 210 cm Feed speed: 5.5 m/min Max edge thickness: 2 mm Max panel thickness: 40 mm Weight: approx. 450 kg Machine in very good condition, operates flawlessly. Inspection and test possible before purchase.